move [modified]
-
but i t do not move regulary on page it disappear and not move Please mail me
Try Putting Sleep() in your code but it's not a good technique and should be avoided .For experimental basis you can try doing the same. Somethings seem HARD to do, until we know how to do them. ;-) _AnShUmAn_
-
CAN SOMEBODY HELP ME TO MOVE TEXT REGULARLY ON DIALOG BOX Please mail me
Use a timer and whenever it fires, move the text a little bit (you'll need to keep track of its old position). Some tips for your future posts: - don't SHOUT, it is considered rude - when asking a question, do it in a way that it is understandable for everybody (so, explain the problem with sufficient details).
Cédric Moonen Software developer
Charting control -
CAN SOMEBODY HELP ME TO MOVE TEXT REGULARLY ON DIALOG BOX Please mail me
hey, you will have to speak correctly. this is a board read by many people over the world, so speak english plainly (not SMS like). and DON'T SHOUT :(
TOXCCT >>> GEII power
[VisualCalc 3.0 updated ][Flags Beginner's Guide new! ]
-
CAN SOMEBODY HELP ME TO MOVE TEXT REGULARLY ON DIALOG BOX Please mail me
CAN SOMEBODY HELP ME TO MOVE TEXT REGULARLY ON DIALOG BOX I DONT FIND SOLUTION TO MY PROBLEM Please mail me
-
CAN SOMEBODY HELP ME TO MOVE TEXT REGULARLY ON DIALOG BOX I DONT FIND SOLUTION TO MY PROBLEM Please mail me
SHUT UP :mad::mad::mad:
TOXCCT >>> GEII power
[VisualCalc 3.0 updated ][Flags Beginner's Guide new! ]
-
SHUT UP :mad::mad::mad:
TOXCCT >>> GEII power
[VisualCalc 3.0 updated ][Flags Beginner's Guide new! ]
:laugh::laugh::laugh: Please mail me
-
SHUT UP :mad::mad::mad:
TOXCCT >>> GEII power
[VisualCalc 3.0 updated ][Flags Beginner's Guide new! ]
IDONT ASK IT FRM U THEN WHY R U BEHAVE LIKE THIS Please mail me
-
:laugh::laugh::laugh: Please mail me
-
IDONT ASK IT FRM U THEN WHY R U BEHAVE LIKE THIS Please mail me
unless you don't behave correctly yourself on the forum, i wont give you fresh air to breath :mad: have you even read THIS[^] points 2, 6, 8 and 11 apply perfectly to you :suss:
TOXCCT >>> GEII power
[VisualCalc 3.0 updated ][Flags Beginner's Guide new! ]
-
IDONT ASK IT FRM U THEN WHY R U BEHAVE LIKE THIS Please mail me
-
unless you don't behave correctly yourself on the forum, i wont give you fresh air to breath :mad: have you even read THIS[^] points 2, 6, 8 and 11 apply perfectly to you :suss:
TOXCCT >>> GEII power
[VisualCalc 3.0 updated ][Flags Beginner's Guide new! ]
WAT I DO WITH I DONT UNDERSTAND THE ANS SO IASK AGAIN AND AGAIN IF U DONT HAV THE ANS THEN WHY YOU INTERRUPT AND U SAY MY behave IS NOT GOOD BUT ABOUT YOU AND IF YOU DONT HAV THE ANS THEN ITS OK WHY R U BEHAVING LIKE LOOSER Please mail me
-
WAT I DO WITH I DONT UNDERSTAND THE ANS SO IASK AGAIN AND AGAIN IF U DONT HAV THE ANS THEN WHY YOU INTERRUPT AND U SAY MY behave IS NOT GOOD BUT ABOUT YOU AND IF YOU DONT HAV THE ANS THEN ITS OK WHY R U BEHAVING LIKE LOOSER Please mail me
man, i KNOW the answer, but i will definitely keep it for me as long as you insult me and everybody here. you are here since only 2 weeks, and you allow your self to insult CP seniors. F*CK !! you don't even speak a correct english and you want us to guess your needs ? moreover, i told you not to speak with SMS style, but no way, you keep doing it ! and now, you SHOUT to my face because i tell you nicely what's wrong with your behaviour ? man, do you act like this in real life ? i hope not ! so why because you hide your butt behind a computer you take the right to hurt people ???? DOUBLE F*CK !!! now, continue like this, and i'll continue to fight against you, because i respect people who respect me. no rest for the ones who use me to do the job they are too lazy to do themself
TOXCCT >>> GEII power
[VisualCalc 3.0 updated ][Flags Beginner's Guide new! ]
-
WAT I DO WITH I DONT UNDERSTAND THE ANS SO IASK AGAIN AND AGAIN IF U DONT HAV THE ANS THEN WHY YOU INTERRUPT AND U SAY MY behave IS NOT GOOD BUT ABOUT YOU AND IF YOU DONT HAV THE ANS THEN ITS OK WHY R U BEHAVING LIKE LOOSER Please mail me
-
IDONT ASK IT FRM U THEN WHY R U BEHAVE LIKE THIS Please mail me
yogendra kaushik wrote:
IDONT ASK IT FRM U THEN WHY R U BEHAVE LIKE THIS
If you behave like this you will get answer from nobody :wtf:
--[:jig:]-- [My Current Status]
-
then could you tell me the answer plz but give me some example because i try the previous one which doesnot solve my problem i again repeat my problem i have dialog box on which i write "hell0" on static control now i want that when this dialog box open this text starts moving not disappear from left to right and it should be shown on dialog box even when it move Please mail me
-
then could you tell me the answer plz but give me some example because i try the previous one which doesnot solve my problem i again repeat my problem i have dialog box on which i write "hell0" on static control now i want that when this dialog box open this text starts moving not disappear from left to right and it should be shown on dialog box even when it move Please mail me
OK, if you are calm now, then I can give it a try: You have got the solution in the early responses of this thread (from _AnShUmAn_ and , but I will try to explain the principle further: In order to move the static window, you must use a Windows timer. A timer works this way: You set it with a call to SetTimer(). When the timer expires, your OnTimer function will be called. In your OnTimer function, call MoveWindow() or SetWindowPos() to move the static window. (Use the function KillTimer to stop the timer). And that's all. I suggest you to start with getting familiar to how Windows timers work. Then put useful code in the OnTimer function. When you start with using MoveWindow() or SetWindowPos(), then you must find out the boundries of the main window and make sure your static window remains within the main window. Kakan
-
OK, if you are calm now, then I can give it a try: You have got the solution in the early responses of this thread (from _AnShUmAn_ and , but I will try to explain the principle further: In order to move the static window, you must use a Windows timer. A timer works this way: You set it with a call to SetTimer(). When the timer expires, your OnTimer function will be called. In your OnTimer function, call MoveWindow() or SetWindowPos() to move the static window. (Use the function KillTimer to stop the timer). And that's all. I suggest you to start with getting familiar to how Windows timers work. Then put useful code in the OnTimer function. When you start with using MoveWindow() or SetWindowPos(), then you must find out the boundries of the main window and make sure your static window remains within the main window. Kakan
i declare this code in OnInitDialog function: CString m_t2=SetTimer(4, 2000, 0); m_t2= KillTimer(5000); and then i use void CAfter::OnTimer(UINT nIDEvent) { GetDlgItem(IDC_MOVING_TEXT)->MoveWindow(10,20,50,40,TRUE); CDialog::OnTimer(nIDEvent); } where CAfter is my class name but not work please tell me Please mail me
-
then could you tell me the answer plz but give me some example because i try the previous one which doesnot solve my problem i again repeat my problem i have dialog box on which i write "hell0" on static control now i want that when this dialog box open this text starts moving not disappear from left to right and it should be shown on dialog box even when it move Please mail me
Try this out: Declare x and y in you dialog class .h file If your dialog class name is Cmain_dlg and the name of the .h file is main_dlg.h, then goto main_dlg.h and declare x and y.
int x;
int y;Go to your main_dlg.cpp file and call the WM_INITDIALG function from the class wizard.
void Cmain_dlg::OnInitDialog()
{
CDialog::OnInitDialog();SetTimer(1, 100, NULL); x=0,y=0;}
Call the WM_TIMER function from the class wizard and add the following:
void Cmain_dlg::OnTimer(UINT nIDEvent)
{
// TODO: Add your message handler code here and/or call default
x=x+2;
GetDlgItem( IDC_STATIC_Title )->SetWindowPos( 0, x, y, 0,0, SWP_NOSIZE|SWP_NOZORDER);
//IDC_STATIC_Title is the name of the static control
if (x ==200) // set the value according to you dialog box size
x=x-200;
CDialog::OnTimer(nIDEvent);
}If this dosent help you, then nothing will! Fortitudine Vinsinues!
-
Try this out: Declare x and y in you dialog class .h file If your dialog class name is Cmain_dlg and the name of the .h file is main_dlg.h, then goto main_dlg.h and declare x and y.
int x;
int y;Go to your main_dlg.cpp file and call the WM_INITDIALG function from the class wizard.
void Cmain_dlg::OnInitDialog()
{
CDialog::OnInitDialog();SetTimer(1, 100, NULL); x=0,y=0;}
Call the WM_TIMER function from the class wizard and add the following:
void Cmain_dlg::OnTimer(UINT nIDEvent)
{
// TODO: Add your message handler code here and/or call default
x=x+2;
GetDlgItem( IDC_STATIC_Title )->SetWindowPos( 0, x, y, 0,0, SWP_NOSIZE|SWP_NOZORDER);
//IDC_STATIC_Title is the name of the static control
if (x ==200) // set the value according to you dialog box size
x=x-200;
CDialog::OnTimer(nIDEvent);
}If this dosent help you, then nothing will! Fortitudine Vinsinues!
THANKS A LOT AND SORRY TO TOX Please mail me
-
THANKS A LOT AND SORRY TO TOX Please mail me
it's OK if you say it without caps... ;P unless you have a ear problem :cool:
TOXCCT >>> GEII power
[VisualCalc 3.0 updated ][Flags Beginner's Guide new! ]