Clearing the edit box in ccombobox
-
Thanks for all your help! However,
DavidCrow wrote:
m_cb.InsertString(0, "");m_cb.SetCurSel(0);
appears to solve the clearing problem only for the Dropdown Style combobox (providing much more acceptable appearance), but sadly does not clear the edit box for the Drop List style. :confused: In drop list mode my OnSelchangeCombo function sends a WM_SETTEXT right before leaving the function and ignoring: ->InsertString(0,"",0); //(overridden InsertString) ->SetWindowText(""); ->SetDlgItemText( IDC_COMBO, "") even though it executes lines like: ->GetCurSel(); immediately before the ->InsertString etc. Subsequent attempts in my DisplayDialog function to clear the Drop List edit box employing the ->InsertString(0,"",0); //(overridden InsertString) ->SetWindowText(""); ->SetDlgItemText( IDC_COMBO, "") edit box are also unsuccessful. Could the Drop List style be refusing to allow me to change the edit box because I have the "Owner Draw" selection set to "No?" Thanks again for your assistance to date. I appreciate it a great deal.
"For a successful technology, reality must take precedence over public relations, for nature cannot be fooled." Richard Feynman, Minority Report to the Official Report on the Space Shuttle Challenger Crash
lctrncs wrote:
In drop list mode my OnSelchangeCombo function...
What does this method look like?
"Approved Workmen Are Not Ashamed" - 2 Timothy 2:15
"Judge not by the eye but by the heart." - Native American Proverb
-
lctrncs wrote:
I am beginning to wonder if my use of the dereference operator rather than the dot operator might be part of my problem.
Use -> with pointers, and a . (dot) otherwise. The compiler should warn you of incorrect usage.
lctrncs wrote:
w_wndOverBox InsertString(0,"",0)
What's holding
w_wndOverBoxandInsertString()apart?lctrncs wrote:
Then I get and exception error, and the debuger shows me a line in afxwin.inl...
An exception or an assertion?
"Approved Workmen Are Not Ashamed" - 2 Timothy 2:15
"Judge not by the eye but by the heart." - Native American Proverb
DavidCrow wrote:
What's holding w_wndOverBox and InsertString() apart?
A dot operator (sorry about the incorrect post).
DavidCrow wrote:
An exception or an assertion?
An assertion: Debug Assertion Failed...
_AFXWIN_INLINE int CCombobox::InsertString(int nIndex, LPCTSTR lpszString) { ASSERT(::IsWindow(m_hWnd)); return (int)::Sendmessage(m_hWnd, CB_INSERTSTRING, nIndex, (LPARAM)lpszString); }"For a successful technology, reality must take precedence over public relations, for nature cannot be fooled." Richard Feynman, Minority Report to the Official Report on the Space Shuttle Challenger Crash
-
DavidCrow wrote:
What's holding w_wndOverBox and InsertString() apart?
A dot operator (sorry about the incorrect post).
DavidCrow wrote:
An exception or an assertion?
An assertion: Debug Assertion Failed...
_AFXWIN_INLINE int CCombobox::InsertString(int nIndex, LPCTSTR lpszString) { ASSERT(::IsWindow(m_hWnd)); return (int)::Sendmessage(m_hWnd, CB_INSERTSTRING, nIndex, (LPARAM)lpszString); }"For a successful technology, reality must take precedence over public relations, for nature cannot be fooled." Richard Feynman, Minority Report to the Official Report on the Space Shuttle Challenger Crash
lctrncs wrote:
An assertion: Debug Assertion Failed... _AFXWIN_INLINE int CCombobox::InsertString(int nIndex, LPCTSTR lpszString) { ASSERT(::IsWindow(m_hWnd)); return (int)::Sendmessage(m_hWnd, CB_INSERTSTRING, nIndex, (LPARAM)lpszString); }
Which indicates you have a non-existent window. At what point are you trying to populate the combobox?
"Approved Workmen Are Not Ashamed" - 2 Timothy 2:15
"Judge not by the eye but by the heart." - Native American Proverb
-
lctrncs wrote:
If the Combobox was not designed to have the edit box cleared, how come it has the member Clear()?
To clear any "selected" text from the control. Are you selecting the text prior to calling the
Clear()method?
"Approved Workmen Are Not Ashamed" - 2 Timothy 2:15
"Judge not by the eye but by the heart." - Native American Proverb
Yes. I select the text with: pCombo->SetEditSel(0,-1); Interestingly, I have found that
pCombo->SetEditSel(0,-1); pCombo->Clear();does not work as well aspCombo->SetEditSel(0,-1); pCombo->Paste(); pCombo->SetEditSel(0,-1); pCombo->Clear();while this is effective - it not cosmetically pleasing."For a successful technology, reality must take precedence over public relations, for nature cannot be fooled." Richard Feynman, Minority Report to the Official Report on the Space Shuttle Challenger Crash
-
lctrncs wrote:
An assertion: Debug Assertion Failed... _AFXWIN_INLINE int CCombobox::InsertString(int nIndex, LPCTSTR lpszString) { ASSERT(::IsWindow(m_hWnd)); return (int)::Sendmessage(m_hWnd, CB_INSERTSTRING, nIndex, (LPARAM)lpszString); }
Which indicates you have a non-existent window. At what point are you trying to populate the combobox?
"Approved Workmen Are Not Ashamed" - 2 Timothy 2:15
"Judge not by the eye but by the heart." - Native American Proverb
I populate the combobox in OnInitDialog - which is only called upon dialog start and after a change to the database such as adding or deleting a record. I am trying to clear the dropdown style edit box (drop list style would be preferred due to the static edit box) from my DisplayRecord function (called at the end of OnInitDialog), and this is where I have instantiated m_wndComboBox, and from where I call m_wndComboBox.InsertString(0,"",0). The control exists on a modeless dialog, which is trying to open at the time of the assert.
"For a successful technology, reality must take precedence over public relations, for nature cannot be fooled." Richard Feynman, Minority Report to the Official Report on the Space Shuttle Challenger Crash
-
I populate the combobox in OnInitDialog - which is only called upon dialog start and after a change to the database such as adding or deleting a record. I am trying to clear the dropdown style edit box (drop list style would be preferred due to the static edit box) from my DisplayRecord function (called at the end of OnInitDialog), and this is where I have instantiated m_wndComboBox, and from where I call m_wndComboBox.InsertString(0,"",0). The control exists on a modeless dialog, which is trying to open at the time of the assert.
"For a successful technology, reality must take precedence over public relations, for nature cannot be fooled." Richard Feynman, Minority Report to the Official Report on the Space Shuttle Challenger Crash
lctrncs wrote:
...this is where I have instantiated m_wndComboBox...
m_wndComboBoxshould be a member variable, not local to some function.
"Approved Workmen Are Not Ashamed" - 2 Timothy 2:15
"Judge not by the eye but by the heart." - Native American Proverb
-
lctrncs wrote:
In drop list mode my OnSelchangeCombo function...
What does this method look like?
"Approved Workmen Are Not Ashamed" - 2 Timothy 2:15
"Judge not by the eye but by the heart." - Native American Proverb
What does my OnSelChangeCombo function look like? It is rather simple: 1. Pointer to the Combobox with assert if NULL, 2. code to return index of selected item in listbox from control directed alpha listing (thank you Chris Losinger!), 3. dirtyflag check of record and associated commit if true, 4. call of the GotoRecord function.
"For a successful technology, reality must take precedence over public relations, for nature cannot be fooled." Richard Feynman, Minority Report to the Official Report on the Space Shuttle Challenger Crash
-
What does my OnSelChangeCombo function look like? It is rather simple: 1. Pointer to the Combobox with assert if NULL, 2. code to return index of selected item in listbox from control directed alpha listing (thank you Chris Losinger!), 3. dirtyflag check of record and associated commit if true, 4. call of the GotoRecord function.
"For a successful technology, reality must take precedence over public relations, for nature cannot be fooled." Richard Feynman, Minority Report to the Official Report on the Space Shuttle Challenger Crash
Ok, what I have here may help, or it may not since it is not entirely like what you have. I have a
CRecordset-derived class that reads from the Employees table of the Northwind database. I have a dialog with a combobox (having theCBS_DROPDOWNLISTstyle) and listbox. Selecting an item from the combobox will add it to the listbox. The selection in the combobox is then cleared.BOOL CMyDlg::OnInitDialog()
{
CDialog::OnInitDialog();CDatabase db; CSet rs(&db); rs.Open(); while (! rs.IsEOF()) { m\_combo.AddString(rs.m\_LastName); rs.MoveNext(); } rs.Close(); m\_combo.InsertString(0, ""); return TRUE; // return TRUE unless you set the focus to a control}
void CMyDlg::OnSelchangeCombo1()
{
int nIndex = m_combo.GetCurSel();
CString strItem;
m_combo.GetLBText(nIndex, strItem);
m_list.AddString(strItem);m\_combo.SetCurSel(0);}
Is this close?
"Approved Workmen Are Not Ashamed" - 2 Timothy 2:15
"Judge not by the eye but by the heart." - Native American Proverb
-
lctrncs wrote:
...this is where I have instantiated m_wndComboBox...
m_wndComboBoxshould be a member variable, not local to some function.
"Approved Workmen Are Not Ashamed" - 2 Timothy 2:15
"Judge not by the eye but by the heart." - Native American Proverb
As I said, I have never tried to instantiate a class instance so that I can use the dot operator. I tried to instantiate it in a number of locations (mainframe.cpp main.c etc.) without success. So where should I instantiate my m_wndCombobox so that I can use the dot operator as you suggest m_combo.InsertStinrg(0,"") ? Why should the dot operator work when a pointer does not?
"For a successful technology, reality must take precedence over public relations, for nature cannot be fooled." Richard Feynman, Minority Report to the Official Report on the Space Shuttle Challenger Crash
-
As I said, I have never tried to instantiate a class instance so that I can use the dot operator. I tried to instantiate it in a number of locations (mainframe.cpp main.c etc.) without success. So where should I instantiate my m_wndCombobox so that I can use the dot operator as you suggest m_combo.InsertStinrg(0,"") ? Why should the dot operator work when a pointer does not?
"For a successful technology, reality must take precedence over public relations, for nature cannot be fooled." Richard Feynman, Minority Report to the Official Report on the Space Shuttle Challenger Crash
lctrncs wrote:
So where should I instantiate my m_wndCombobox so that I can use the dot operator as you suggest
It should belong to the class that owns it (hence the
m_prefix). In my example,m_comboandm_listare both members ofCMyDialog.lctrncs wrote:
Why should the dot operator work when a pointer does not?
Pointer variables use ->, while non-pointer variables use a dot. In reality,
pointer->member
is equivalent to:
(*pointer).member
See here for more on the member-selection operator.
"Approved Workmen Are Not Ashamed" - 2 Timothy 2:15
"Judge not by the eye but by the heart." - Native American Proverb
-
lctrncs wrote:
So where should I instantiate my m_wndCombobox so that I can use the dot operator as you suggest
It should belong to the class that owns it (hence the
m_prefix). In my example,m_comboandm_listare both members ofCMyDialog.lctrncs wrote:
Why should the dot operator work when a pointer does not?
Pointer variables use ->, while non-pointer variables use a dot. In reality,
pointer->member
is equivalent to:
(*pointer).member
See here for more on the member-selection operator.
"Approved Workmen Are Not Ashamed" - 2 Timothy 2:15
"Judge not by the eye but by the heart." - Native American Proverb
So I should right click on CDialog, choose Add Member Function and enter Ccombobox and m_combo to instantiate m_combo as a member CDialog?
"For a successful technology, reality must take precedence over public relations, for nature cannot be fooled." Richard Feynman, Minority Report to the Official Report on the Space Shuttle Challenger Crash
-
So I should right click on CDialog, choose Add Member Function and enter Ccombobox and m_combo to instantiate m_combo as a member CDialog?
"For a successful technology, reality must take precedence over public relations, for nature cannot be fooled." Richard Feynman, Minority Report to the Official Report on the Space Shuttle Challenger Crash
lctrncs wrote:
So I should right click on CDialog, choose Add Member Function and enter Ccombobox and m_combo to instantiate m_combo as a member CDialog?
No. Use ClassWizard (Ctrl+W) to associate a member variable with a control.
"Approved Workmen Are Not Ashamed" - 2 Timothy 2:15
"Judge not by the eye but by the heart." - Native American Proverb
-
Ok, what I have here may help, or it may not since it is not entirely like what you have. I have a
CRecordset-derived class that reads from the Employees table of the Northwind database. I have a dialog with a combobox (having theCBS_DROPDOWNLISTstyle) and listbox. Selecting an item from the combobox will add it to the listbox. The selection in the combobox is then cleared.BOOL CMyDlg::OnInitDialog()
{
CDialog::OnInitDialog();CDatabase db; CSet rs(&db); rs.Open(); while (! rs.IsEOF()) { m\_combo.AddString(rs.m\_LastName); rs.MoveNext(); } rs.Close(); m\_combo.InsertString(0, ""); return TRUE; // return TRUE unless you set the focus to a control}
void CMyDlg::OnSelchangeCombo1()
{
int nIndex = m_combo.GetCurSel();
CString strItem;
m_combo.GetLBText(nIndex, strItem);
m_list.AddString(strItem);m\_combo.SetCurSel(0);}
Is this close?
"Approved Workmen Are Not Ashamed" - 2 Timothy 2:15
"Judge not by the eye but by the heart." - Native American Proverb
Well I got things running like you show here - the Class Wizard info was key - but it still does not clear the edit box in either dropdown or drop list mode - any other suggestions?
"For a successful technology, reality must take precedence over public relations, for nature cannot be fooled." Richard Feynman, Minority Report to the Official Report on the Space Shuttle Challenger Crash
-
Well I got things running like you show here - the Class Wizard info was key - but it still does not clear the edit box in either dropdown or drop list mode - any other suggestions?
"For a successful technology, reality must take precedence over public relations, for nature cannot be fooled." Richard Feynman, Minority Report to the Official Report on the Space Shuttle Challenger Crash
If you can narrow this project down to just the relevant lines, you can e-mail it to me and I'll take a look.
"Approved Workmen Are Not Ashamed" - 2 Timothy 2:15
"Judge not by the eye but by the heart." - Native American Proverb
-
If you can narrow this project down to just the relevant lines, you can e-mail it to me and I'll take a look.
"Approved Workmen Are Not Ashamed" - 2 Timothy 2:15
"Judge not by the eye but by the heart." - Native American Proverb
Thank you. I spent some time with it this weekend and got it working. Thank You! Your assistance was of great service to me! Thank you again!
"For a successful technology, reality must take precedence over public relations, for nature cannot be fooled." Richard Feynman, Minority Report to the Official Report on the Space Shuttle Challenger Crash
-
Thank you. I spent some time with it this weekend and got it working. Thank You! Your assistance was of great service to me! Thank you again!
"For a successful technology, reality must take precedence over public relations, for nature cannot be fooled." Richard Feynman, Minority Report to the Official Report on the Space Shuttle Challenger Crash
Overall, what did you do to finally get it going?
"Approved Workmen Are Not Ashamed" - 2 Timothy 2:15
"Judge not by the eye but by the heart." - Native American Proverb