std::string to const WCHAR*
-
No, I am verifying that even though he is using
std::string(ANSI) instead ofstd::wstring(Unicode/Wide), he can still expect to get aconst WCHAR*returned bystd::string::c_str()? I am under the impression that he will get aconst **char***fromstd::string::c_str(), and aconst **WCHAR***(orconst wchar_t*) fromstd::**w**string::c_str(). Peace!-=- James
If you think it costs a lot to do it right, just wait until you find out how much it costs to do it wrong!
Avoid driving a vehicle taller than you and remember that Professional Driver on Closed Course does not mean your Dumb Ass on a Public Road!
DeleteFXPFiles & CheckFavorites (Please rate this post!)Because
string.c_str()returns achar*is why I indicated it would need to be a minimum. A typecast would still need to be applied (to make it wide). I don't use the STL, but a better solution would be to usewstringinstead.
"Approved Workmen Are Not Ashamed" - 2 Timothy 2:15
"Judge not by the eye but by the heart." - Native American Proverb
-
ummm seems that would do the reverse of what I want. I want to go to a wide string from a cstr.
As I do not use the STL, I did not want to commit to a definite solution. That's why I prefaced it with, "At a minimum." From there you could have just cast it to a
WCHAR*. A better solution is to use awstringinstead.
"Approved Workmen Are Not Ashamed" - 2 Timothy 2:15
"Judge not by the eye but by the heart." - Native American Proverb
-
Stick^ wrote:
Would if I could, but I am given a c_str and must convert it to a wide, hence the question.
c_str()is a method ofwstring. No conversion is necessary as it is already "wide." Now if you are unable to changestd::stringtostd::wstring, that's a different problem.
"Approved Workmen Are Not Ashamed" - 2 Timothy 2:15
"Judge not by the eye but by the heart." - Native American Proverb
-
You are given a
const char*you mean? If that is the case, use MultiByteToWideChar to convert theconst char*to an array ofconst wchar_t*and pass that to your draw function (NOTE: that will only work for UNICODE builds -- for a more generic approach, look at the A2T macro)If you decide to become a software engineer, you are signing up to have a 1/2" piece of silicon tell you exactly how stupid you really are for 8 hours a day, 5 days a week Zac
-
You are given a
const char*you mean? If that is the case, use MultiByteToWideChar to convert theconst char*to an array ofconst wchar_t*and pass that to your draw function (NOTE: that will only work for UNICODE builds -- for a more generic approach, look at the A2T macro)If you decide to become a software engineer, you are signing up to have a 1/2" piece of silicon tell you exactly how stupid you really are for 8 hours a day, 5 days a week Zac
No. I'm given a std::string... here's the declaration: string m_ac; Now, if I attempt: m_graphics->DrawString(m_ac, -1, &font, PointF(8,8), NULL, &grnbrush); I get: Error 1 error C2664: 'Gdiplus::Status Gdiplus::Graphics::DrawString(const WCHAR *,INT,const Gdiplus::Font *,const Gdiplus::RectF &,const Gdiplus::StringFormat *,const Gdiplus::Brush *)' : cannot convert parameter 1 from 'std::string' to 'const WCHAR *' so as you can clearly see, the m_ac is NOT already wide. I have tried to do something like this: WCHAR str[20+1] = L""; WideCharToMultiByte(CP_ACP, 0, m_ac.c_str(), -1, str, wcslen(str)+1, NULL, NULL); but this does not work either. Nor does just m_ac in parameter 3.
-
Because
string.c_str()returns achar*is why I indicated it would need to be a minimum. A typecast would still need to be applied (to make it wide). I don't use the STL, but a better solution would be to usewstringinstead.
"Approved Workmen Are Not Ashamed" - 2 Timothy 2:15
"Judge not by the eye but by the heart." - Native American Proverb
The const char* returned by c_str() is not a wide string, while casting it to WCHAR* will allow the code to compile, it will not work correctly. Peace!
-=- James
If you think it costs a lot to do it right, just wait until you find out how much it costs to do it wrong!
Avoid driving a vehicle taller than you and remember that Professional Driver on Closed Course does not mean your Dumb Ass on a Public Road!
DeleteFXPFiles & CheckFavorites (Please rate this post!) -
The const char* returned by c_str() is not a wide string, while casting it to WCHAR* will allow the code to compile, it will not work correctly. Peace!
-=- James
If you think it costs a lot to do it right, just wait until you find out how much it costs to do it wrong!
Avoid driving a vehicle taller than you and remember that Professional Driver on Closed Course does not mean your Dumb Ass on a Public Road!
DeleteFXPFiles & CheckFavorites (Please rate this post!)James R. Twine wrote:
while casting it to WCHAR* will allow the code to compile, it will not work correctly.
From the context, I think he meant casting the entire string, and not the pointer. :)
-- Mr. Bender's Wardrobe by ROBOTANY 500
-
No. I'm given a std::string... here's the declaration: string m_ac; Now, if I attempt: m_graphics->DrawString(m_ac, -1, &font, PointF(8,8), NULL, &grnbrush); I get: Error 1 error C2664: 'Gdiplus::Status Gdiplus::Graphics::DrawString(const WCHAR *,INT,const Gdiplus::Font *,const Gdiplus::RectF &,const Gdiplus::StringFormat *,const Gdiplus::Brush *)' : cannot convert parameter 1 from 'std::string' to 'const WCHAR *' so as you can clearly see, the m_ac is NOT already wide. I have tried to do something like this: WCHAR str[20+1] = L""; WideCharToMultiByte(CP_ACP, 0, m_ac.c_str(), -1, str, wcslen(str)+1, NULL, NULL); but this does not work either. Nor does just m_ac in parameter 3.
Have you tried "mbstowcs" or "mbstowcs_s" in stdlib.h.
std::string mbstr = "The string!"; std::vector<wchar_t> wcstr(mbstr.size() + 1, L'\0'); size_t written = 0; mbstate_t state = {0}; const char* pmbstr = mbstr.c_str(); errno_t result = mbsrtowcs_s(&written, &wcstr[0], wcstr.size(), &pmbstr, mbstr.size(), &state); std::wcout << &wcstr[0] << std::endl;-- modified at 20:19 Thursday 28th September, 2006 -
James R. Twine wrote:
while casting it to WCHAR* will allow the code to compile, it will not work correctly.
From the context, I think he meant casting the entire string, and not the pointer. :)
-- Mr. Bender's Wardrobe by ROBOTANY 500
You mean to create a temporary, as in
wstring( sTheString.c_str() )? I do not think that will work, either... Unless I am missing the intent of your smiley, that is. Peace!-=- James
If you think it costs a lot to do it right, just wait until you find out how much it costs to do it wrong!
Avoid driving a vehicle taller than you and remember that Professional Driver on Closed Course does not mean your Dumb Ass on a Public Road!
DeleteFXPFiles & CheckFavorites (Please rate this post!) -
You mean to create a temporary, as in
wstring( sTheString.c_str() )? I do not think that will work, either... Unless I am missing the intent of your smiley, that is. Peace!-=- James
If you think it costs a lot to do it right, just wait until you find out how much it costs to do it wrong!
Avoid driving a vehicle taller than you and remember that Professional Driver on Closed Course does not mean your Dumb Ass on a Public Road!
DeleteFXPFiles & CheckFavorites (Please rate this post!)Naw, more likely using CA2CW or something along those lines. My bet's on that David's a bit too experienced to fall for the (wchar_t*)str.c_str() and similar newbie mistakes. :)
-
Don't think I can use ATL and not sure how I would do that anyway yet. I'm programming a win32 dll.
If you are using a fairly new version of MFC (7, 8), you can use the conversion classes such as CA2W without any hassles. Just include atlconv.h in stdafx.h, and you're set.
-- Not a substitute for human interaction
-
No. I'm given a std::string... here's the declaration: string m_ac; Now, if I attempt: m_graphics->DrawString(m_ac, -1, &font, PointF(8,8), NULL, &grnbrush); I get: Error 1 error C2664: 'Gdiplus::Status Gdiplus::Graphics::DrawString(const WCHAR *,INT,const Gdiplus::Font *,const Gdiplus::RectF &,const Gdiplus::StringFormat *,const Gdiplus::Brush *)' : cannot convert parameter 1 from 'std::string' to 'const WCHAR *' so as you can clearly see, the m_ac is NOT already wide. I have tried to do something like this: WCHAR str[20+1] = L""; WideCharToMultiByte(CP_ACP, 0, m_ac.c_str(), -1, str, wcslen(str)+1, NULL, NULL); but this does not work either. Nor does just m_ac in parameter 3.
Stick^ wrote:
WideCharToMultiByte(CP_ACP, 0, m_ac.c_str(), -1, str, wcslen(str)+1, NULL, NULL);
Please use MultiByteToWideChar() instead. You are converting from char to wchar_t, right?
wchar_t buf[20+1] = { 0 };
MultiByteToWideChar(CP_ACP, MB_PRECOMPOSED, m_ac.c_str(), m_ac.size(), buf, 20);should do the trick.
-- From the Makers of Futurama
-
The const char* returned by c_str() is not a wide string, while casting it to WCHAR* will allow the code to compile, it will not work correctly. Peace!
-=- James
If you think it costs a lot to do it right, just wait until you find out how much it costs to do it wrong!
Avoid driving a vehicle taller than you and remember that Professional Driver on Closed Course does not mean your Dumb Ass on a Public Road!
DeleteFXPFiles & CheckFavorites (Please rate this post!)James R. Twine wrote:
The const char* returned by c_str() is not a wide string,...
So what exactly does
std::wstring::c_str()return?
"Approved Workmen Are Not Ashamed" - 2 Timothy 2:15
"Judge not by the eye but by the heart." - Native American Proverb
-
James R. Twine wrote:
The const char* returned by c_str() is not a wide string,...
So what exactly does
std::wstring::c_str()return?
"Approved Workmen Are Not Ashamed" - 2 Timothy 2:15
"Judge not by the eye but by the heart." - Native American Proverb
std::**w**string::c_str()returns aconst WCHAR*(const wchar_t*), but notstd::string:c_str(), which is what the OP was asking about. I think that we (I?) are just getting confused about what "width" of string object is in use here. The OP is dealing with having astd::string(ANSI) object and needs to get a (presumably valid) const WCHAR* (Unicode) out of it. Since they cannot simply change the strings fromstd::stringtostd::wstring, they are stuck with ANSI string objects, and no amount of casting is going to create a valid wide string from the return ofstd::string:c_str(). They need to call a conversion function (either directly or indirectly) in order to translate the string correctly. Peace!-=- James
If you think it costs a lot to do it right, just wait until you find out how much it costs to do it wrong!
Avoid driving a vehicle taller than you and remember that Professional Driver on Closed Course does not mean your Dumb Ass on a Public Road!
DeleteFXPFiles & CheckFavorites (Please rate this post!) -
std::**w**string::c_str()returns aconst WCHAR*(const wchar_t*), but notstd::string:c_str(), which is what the OP was asking about. I think that we (I?) are just getting confused about what "width" of string object is in use here. The OP is dealing with having astd::string(ANSI) object and needs to get a (presumably valid) const WCHAR* (Unicode) out of it. Since they cannot simply change the strings fromstd::stringtostd::wstring, they are stuck with ANSI string objects, and no amount of casting is going to create a valid wide string from the return ofstd::string:c_str(). They need to call a conversion function (either directly or indirectly) in order to translate the string correctly. Peace!-=- James
If you think it costs a lot to do it right, just wait until you find out how much it costs to do it wrong!
Avoid driving a vehicle taller than you and remember that Professional Driver on Closed Course does not mean your Dumb Ass on a Public Road!
DeleteFXPFiles & CheckFavorites (Please rate this post!)James R. Twine wrote:
std::wstring::c_str() returns a const WCHAR* (const wchar_t*)...
Which is why I suggested it as a better solution here.
James R. Twine wrote:
...no amount of casting is going to create a valid wide string from the return of std::string:c_str().
Agreed. :-O Blunder on my part.
"Approved Workmen Are Not Ashamed" - 2 Timothy 2:15
"Judge not by the eye but by the heart." - Native American Proverb
-
No. I'm given a std::string... here's the declaration: string m_ac; Now, if I attempt: m_graphics->DrawString(m_ac, -1, &font, PointF(8,8), NULL, &grnbrush); I get: Error 1 error C2664: 'Gdiplus::Status Gdiplus::Graphics::DrawString(const WCHAR *,INT,const Gdiplus::Font *,const Gdiplus::RectF &,const Gdiplus::StringFormat *,const Gdiplus::Brush *)' : cannot convert parameter 1 from 'std::string' to 'const WCHAR *' so as you can clearly see, the m_ac is NOT already wide. I have tried to do something like this: WCHAR str[20+1] = L""; WideCharToMultiByte(CP_ACP, 0, m_ac.c_str(), -1, str, wcslen(str)+1, NULL, NULL); but this does not work either. Nor does just m_ac in parameter 3.
You are compiling with UNICODE defined, so DrawString is mapped to DrawStringW (which takes wide characters). Since you have a string (which are ANSI characters), you need to convert that string to a wstring (or simply to an array of wchar_t's). You'll need to muse MultiByteToWideChar for that (not WideCharToMultiByte).
If you decide to become a software engineer, you are signing up to have a 1/2" piece of silicon tell you exactly how stupid you really are for 8 hours a day, 5 days a week Zac
-
No. I'm given a std::string... here's the declaration: string m_ac; Now, if I attempt: m_graphics->DrawString(m_ac, -1, &font, PointF(8,8), NULL, &grnbrush); I get: Error 1 error C2664: 'Gdiplus::Status Gdiplus::Graphics::DrawString(const WCHAR *,INT,const Gdiplus::Font *,const Gdiplus::RectF &,const Gdiplus::StringFormat *,const Gdiplus::Brush *)' : cannot convert parameter 1 from 'std::string' to 'const WCHAR *' so as you can clearly see, the m_ac is NOT already wide. I have tried to do something like this: WCHAR str[20+1] = L""; WideCharToMultiByte(CP_ACP, 0, m_ac.c_str(), -1, str, wcslen(str)+1, NULL, NULL); but this does not work either. Nor does just m_ac in parameter 3.
-
Stick^ wrote:
WideCharToMultiByte(CP_ACP, 0, m_ac.c_str(), -1, str, wcslen(str)+1, NULL, NULL);
Please use MultiByteToWideChar() instead. You are converting from char to wchar_t, right?
wchar_t buf[20+1] = { 0 };
MultiByteToWideChar(CP_ACP, MB_PRECOMPOSED, m_ac.c_str(), m_ac.size(), buf, 20);should do the trick.
-- From the Makers of Futurama
-
You are compiling with UNICODE defined, so DrawString is mapped to DrawStringW (which takes wide characters). Since you have a string (which are ANSI characters), you need to convert that string to a wstring (or simply to an array of wchar_t's). You'll need to muse MultiByteToWideChar for that (not WideCharToMultiByte).
If you decide to become a software engineer, you are signing up to have a 1/2" piece of silicon tell you exactly how stupid you really are for 8 hours a day, 5 days a week Zac
Actually, the OP is using the GDI+ classes, and they tend to always accept wide strings, and not have
AorWversions of functions that are aliased-to depending on the build. For example, GDI+'s three versions of theGraphics::DrawString(...)function all take aconst WCHAR*as the string type. Peace!-=- James
If you think it costs a lot to do it right, just wait until you find out how much it costs to do it wrong!
Avoid driving a vehicle taller than you and remember that Professional Driver on Closed Course does not mean your Dumb Ass on a Public Road!
DeleteFXPFiles & CheckFavorites (Please rate this post!)