AT Commands
-
savitri wrote:
HELP ME.ITS URGENT.
No doubts about. :-D
If the Lord God Almighty had consulted me before embarking upon the Creation, I would have recommended something simpler. -- Alfonso the Wise, 13th Century King of Castile.
This is going on my arrogant assumptions. You may have a superb reason why I'm completely wrong. -- Iain ClarkeHi everyOne, I am having doubt in using AT commands.now i am using only AT and i am getting reply as OK.But ia dont know how to use AT+CMGS and AT+CMGR.Shall i write function for using AT commands.If So tell me how shall write.I am not new to this forum.but it is by mistake.Please give me some idea.**Sorry for my mistakes.**If u all have some ideas then please give.Reply me Soon. Thanks, savitri
-
savitri wrote:
HELP ME.ITS URGENT.
Hi Savitri, I can understand it. Don't feel bad about the the disheartening replies. If the query is really urgent, you can post it in Soapbox. You'll get guaranteed overwhelming replies. BTW, keep your entire post in bold (and if possible in UPPER CASE), while posting your query in the soapbox.
Nobody can give you wiser advice than yourself. - Cicero .·´¯`·->Rajesh<-·´¯`·. Codeproject.com: Visual C++ MVP
Hey man, each time you exploit your misogynous mood, I have to balance the voting down. :-D
If the Lord God Almighty had consulted me before embarking upon the Creation, I would have recommended something simpler. -- Alfonso the Wise, 13th Century King of Castile.
This is going on my arrogant assumptions. You may have a superb reason why I'm completely wrong. -- Iain Clarke -
Hi everyone, I am savitri here.I am new to this forum.I am working in VC++ language. I am doing GSM modem project. In this project i have to do send and receive messages through Gsm modem using AT command.I did designing and opening port and all.But i am not getting how to use AT commands in My project.I am opening port in new file called comport.h and comport.cpp. But i want to send a sms to particular person selecting from addressbook. Please give me some ideas that how to write code for AT commands. Please i am trying from many days but i didnt got any solutions.so please help me. HELP ME.ITS URGENT. Thanks In Advance, Savitri.:confused:
Hi Savitri, I think for sending the SMS through AT commands you need to have the Extended AT Command set for the mobile you are using. U can send the command same like you are transmitting a string through COM Port and for every extended AT commands you will get the response in event.The thing is you have to find the extended AT command set for you mobile with its documentation then only you will be able to understand the meanings of the resposes.
ritz1234
-
savitri wrote:
HELP ME.ITS URGENT.
Hi Savitri, I can understand it. Don't feel bad about the the disheartening replies. If the query is really urgent, you can post it in Soapbox. You'll get guaranteed overwhelming replies. BTW, keep your entire post in bold (and if possible in UPPER CASE), while posting your query in the soapbox.
Nobody can give you wiser advice than yourself. - Cicero .·´¯`·->Rajesh<-·´¯`·. Codeproject.com: Visual C++ MVP
lol
-
Hi everyOne, I am having doubt in using AT commands.now i am using only AT and i am getting reply as OK.But ia dont know how to use AT+CMGS and AT+CMGR.Shall i write function for using AT commands.If So tell me how shall write.I am not new to this forum.but it is by mistake.Please give me some idea.**Sorry for my mistakes.**If u all have some ideas then please give.Reply me Soon. Thanks, savitri
Sorry I don't know AT commands. Try to ask more to Sunil, it seems he knows about [^]. :)
If the Lord God Almighty had consulted me before embarking upon the Creation, I would have recommended something simpler. -- Alfonso the Wise, 13th Century King of Castile.
This is going on my arrogant assumptions. You may have a superb reason why I'm completely wrong. -- Iain Clarke -
Hey man, each time you exploit your misogynous mood, I have to balance the voting down. :-D
If the Lord God Almighty had consulted me before embarking upon the Creation, I would have recommended something simpler. -- Alfonso the Wise, 13th Century King of Castile.
This is going on my arrogant assumptions. You may have a superb reason why I'm completely wrong. -- Iain ClarkeMisogynous? Umm... OK - You really know me well now. :-O :laugh: And thanks for the vote man. I appreciate it. I'm sick and tired of such URGENT & ALL-BOLD posts. :|
Nobody can give you wiser advice than yourself. - Cicero .·´¯`·->Rajesh<-·´¯`·. Codeproject.com: Visual C++ MVP
-
Hi everyone, I am savitri here.I am new to this forum.I am working in VC++ language. I am doing GSM modem project. In this project i have to do send and receive messages through Gsm modem using AT command.I did designing and opening port and all.But i am not getting how to use AT commands in My project.I am opening port in new file called comport.h and comport.cpp. But i want to send a sms to particular person selecting from addressbook. Please give me some ideas that how to write code for AT commands. Please i am trying from many days but i didnt got any solutions.so please help me. HELP ME.ITS URGENT. Thanks In Advance, Savitri.:confused:
I had given you a link in your previous post of same question. Did you follow that link? If not then try again. http://www.codeproject.com/KB/mobile/irdamobile.aspx[^]
Mukesh Kumar Software Engineer
-
Hi Savitri, I think for sending the SMS through AT commands you need to have the Extended AT Command set for the mobile you are using. U can send the command same like you are transmitting a string through COM Port and for every extended AT commands you will get the response in event.The thing is you have to find the extended AT command set for you mobile with its documentation then only you will be able to understand the meanings of the resposes.
ritz1234
Hi ritz1234, now i am using only one AT command.I want to use 3 to 4 AT commands in my project.But i am not getting how to use those commands.Because i am using only one command.So please tell me how to use all three commands.when i click on send button then AT+CMGS command has to execute and if i got new message then I have to AT+CMGR command.So please Reply me. Thanku, savitri:confused:
-
I had given you a link in your previous post of same question. Did you follow that link? If not then try again. http://www.codeproject.com/KB/mobile/irdamobile.aspx[^]
Mukesh Kumar Software Engineer
Hi mukesh, I used that one but it is not working properly.it is giving error.in tha ensumer file is missing.so please help me out.I am searching for this at commands from so many days.Reply me.. Thanku, Savitri:confused:
-
Hi mukesh, I used that one but it is not working properly.it is giving error.in tha ensumer file is missing.so please help me out.I am searching for this at commands from so many days.Reply me.. Thanku, Savitri:confused:
savitri wrote:
it is giving error.in tha ensumer file is missing.
what is "ensumer" ???
Mukesh Kumar Software Engineer
-
If your comport is configured correctly, i dont think there is any problem in sending and receiving the AT commands. e.g for the basic command "AT" you will get an reply like "OK", So send charactes 'A','T'and '\n'(Enter), you have to recieve 'O','k'and '\n'. Remember to check whether the echo is on r not. If the echo is on, in receive u will get 'A','T','O','k' and '\n'. Regarding other commands check the AT command set manual. If you are unable to get this, be specific what exactly u required. Regards, Sunil.
Hi everyOne, I am having doubt in using AT commands.now i am using only AT and i am getting reply as OK.But ia dont know how to use AT+CMGS and AT+CMGR.Shall i write function for using AT commands.If So tell me how shall write.If u have some ideas tell me.I am trying from so many days. It is urgent. Thanku, Savitri:confused:
-
Hi everyOne, I am having doubt in using AT commands.now i am using only AT and i am getting reply as OK.But ia dont know how to use AT+CMGS and AT+CMGR.Shall i write function for using AT commands.If So tell me how shall write.I am not new to this forum.but it is by mistake.Please give me some idea.**Sorry for my mistakes.**If u all have some ideas then please give.Reply me Soon. Thanks, savitri
Hi savitri, When ur able to send AT and receive OK then in the same way u can use other cmds. Whenever u need to send the msg, Send it like: 1.send "AT+cmgs="mobileno"\n";[mobile no must be a string] 2.Then u receive '>' charcter as an acknoledgement. 3.Then send the msg u want to "msg". 4.After ur msg sending completed send "Escape" character[I didnt remember the ascii value]. If still any doubt just give an reply. Regards, Sunil.
-
Misogynous? Umm... OK - You really know me well now. :-O :laugh: And thanks for the vote man. I appreciate it. I'm sick and tired of such URGENT & ALL-BOLD posts. :|
Nobody can give you wiser advice than yourself. - Cicero .·´¯`·->Rajesh<-·´¯`·. Codeproject.com: Visual C++ MVP
The troll struck back. But, don't worry: fixed. :-D
If the Lord God Almighty had consulted me before embarking upon the Creation, I would have recommended something simpler. -- Alfonso the Wise, 13th Century King of Castile.
This is going on my arrogant assumptions. You may have a superb reason why I'm completely wrong. -- Iain Clarkemodified on Wednesday, May 7, 2008 7:53 AM
-
Hi savitri, When ur able to send AT and receive OK then in the same way u can use other cmds. Whenever u need to send the msg, Send it like: 1.send "AT+cmgs="mobileno"\n";[mobile no must be a string] 2.Then u receive '>' charcter as an acknoledgement. 3.Then send the msg u want to "msg". 4.After ur msg sending completed send "Escape" character[I didnt remember the ascii value]. If still any doubt just give an reply. Regards, Sunil.
-
Hi Sunil, i am understanding this.please if u have some examples then please send me.I am very thank ful to u.please reply me. thanku, savitri:confused:
-
Sorry, i dont have any examples right now. But try it,If u have any queries u can mail me. Regards, Sunil.
-
savitri wrote:
it is giving error.in tha ensumer file is missing.
what is "ensumer" ???
Mukesh Kumar Software Engineer
hi mukesh, sorry it is not enumser.in that project send and receive options are not there.please give some hints.really i am fed up of searching these things.please reply me. thanks in advance, savitri:confused:
-
ok..tell me whether i have to use AT+CMGS in send button directly only or wt..reply me.thanks for giving some idea. thanks, savitri :)
-
Yeah you can send , when u click on the send button,ofcourse it depends on ur application. Regards, Sunil.
-
savitri wrote:
HELP ME.ITS URGENT.
Hi Savitri, I can understand it. Don't feel bad about the the disheartening replies. If the query is really urgent, you can post it in Soapbox. You'll get guaranteed overwhelming replies. BTW, keep your entire post in bold (and if possible in UPPER CASE), while posting your query in the soapbox.
Nobody can give you wiser advice than yourself. - Cicero .·´¯`·->Rajesh<-·´¯`·. Codeproject.com: Visual C++ MVP