search a list control

[rahuljin]

i do some changes ----

for (int nItem = 0; nItem < srvcList.GetItemCount(); nItem++)
{
if (srvcList.GetCheck(nItem))
{
srvcList.GetItemText(nItem, 0, (LPTSTR)ff, 98);
//wcscat_s(ff, L"\r\n");
srvc.SeekToEnd();
int i = 2 * lstrlen(ff) - 2;
int j = 0;
while(i)
{
srvc.Write(&ff[j], 1);
i--;
j++;
}
}
}

the content is ---

AVP BFE BITS

if i use wcscat_s(ff, L"\r\n"), then

AVP
þþþBFE
þþþBITS
þþþþ

this text file will be used by other program, therefore cant compromise with it.

[carter2000]

It looks inefficient :)

[rahuljin]

still there is a problem, there is no new line. i want the content of the text file like this ----- AVP BFE BITS

[carter2000]

You can try veiwing the text in Edit Plus or other text edit software.

[carter2000]

You can try this, open the "srvc.txt", and select all text, and copy them, and open anthor TextEditor(Edit Plus), and paste. If still there is no new line, then I have no ideas. It's seems that Microsoft define a new line as '\r\n', while in Unix it's '\n'.

[rahuljin]

thanks for all the support. finally it is done. the code is not that good ---

TCHAR ff\[100\] = {0};
CStdioFile srvc;
srvc.Open(\_T("c:\\\\srvc.txt"), CFile::modeCreate|CFile::modeReadWrite);

for (int nItem = 0; nItem < srvcList.GetItemCount(); nItem++)
{
	if (srvcList.GetCheck(nItem))
	{
		srvcList.GetItemText(nItem, 0, (LPTSTR)ff, 100);
		int i = 2 \* lstrlen(ff) - 2;
		srvc.SeekToEnd();
		int j = 0;
		while(i)
		{
			srvc.Write(&ff\[j++\], 1);
			--i;				
		}
		ZeroMemory(ff, 100);
		srvc.SeekToEnd();
		srvc.Write("\\n", 1);
	}
}

output is ---

Audiosrv
AVP
BFE
BITS

also please tell me that is there a way due to which edit box control can take only numeric values and with in a bound, say 1 to 1000 only ???

modified on Sunday, July 19, 2009 5:19 PM

[carter2000]

you solve the problem by yourself, congratulation :) . maybe you can try replace the follow codes by "srvc.Write(ff, 2 * lstrlen(ff));", it works too in my computer.

rahuljin wrote:

while(i) { srvc.Write(&ff[j++], 1); --i; }

[rahuljin]

thanks. if you didnt guide and help me, it would be impossible for me. please answer my last question. one more problem found --- in first list control, when i enter an ip say "111.111.111.111", then i cannot enter the ip address "111.111.111.11". also "111.111.111.11" deletes "111.111.111.111" from the list control. here is the code ----

BYTE m\_M1, m\_M2, m\_M3, m\_M4;
TCHAR ss\[50\] = {0};
UpdateData();
int i = -1;
LVFINDINFO temp;

ipAdd.GetAddress(m\_M1, m\_M2, m\_M3, m\_M4);
temp.flags = LVFI\_PARTIAL|LVFI\_STRING;

\_stprintf\_s(ss, \_T("%d.%d.%d.%d"), m\_M1, m\_M2, m\_M3, m\_M4);
temp.psz = ss;
i = ipList.FindItem(&temp);
 
if(radBut1->GetState())
{
	if(m\_M1 && m\_M2 && m\_M3 && m\_M4 && i == -1)
	{
		ipList.InsertItem(s++, (LPCTSTR)ss);
		ipAdd.ClearAddress();
	}
}

else if(radBut2->GetState())
{

	if(i != -1)
		ipList.DeleteItem(i);
	else 
		MessageBox((LPCTSTR)L"Error: Address not found", (LPCTSTR)L"Delete Address", MB\_ICONWARNING | MB\_OK);


	ipAdd.ClearAddress();

modified on Monday, July 20, 2009 3:17 AM

[carter2000]

rahuljin wrote:

ipList.DeleteItem(i);

What's "s" means? The last index of CListCtrl? So if it's, then here

rahuljin wrote:

ipList.DeleteItem(i);

after deleting a item, you must also descend "s". I don't know if this is the reason.

[rahuljin]

still the same problem ---

ipList.DeleteItem(i);
s--;

[carter2000]

rahuljin wrote:

if(i != -1) ipList.DeleteItem(i);

Relpace the codes with: if (i != -1 && lstrcmp(ipList.GetItemText(i), temp.psz) == 0) { ipList.DeleteItem(i); }

[carter2000]

BYTE m_M1, m_M2, m_M3, m_M4;
TCHAR ss[50] = {0};
UpdateData();
ipAdd.GetAddress(m_M1, m_M2, m_M3, m_M4);
_stprintf_s(ss, _T("%d.%d.%d.%d"), m_M1, m_M2, m_M3, m_M4);
int compare;
for (int i = 0; i < ipList.GetItemCount(), ++i)
{
compare = lstrcmp(ss, ipList.GetItemText(i));
if(radBut1->GetState())
{
if(m_M1 && m_M2 && m_M3 && m_M4 && compare != 0)
{
ipList.InsertItem(s++, (LPCTSTR)ss);
ipAdd.ClearAddress();
}
}
else if(radBut2->GetState())
{
if(compare == 0)
ipList.DeleteItem(i);
else
MessageBox((LPCTSTR)L"Error: Address not found", (LPCTSTR)L"Delete Address", MB_ICONWARNING | MB_OK);
ipAdd.ClearAddress();
}
}

This is the final version. :)

[rahuljin]

thanks, both the problems are solved.

BYTE m\_M1, m\_M2, m\_M3, m\_M4;
    TCHAR ss\[50\] = {0};
UpdateData();
int i = -1;
LVFINDINFO temp;

    ipAdd.GetAddress(m\_M1, m\_M2, m\_M3, m\_M4);
temp.flags = LVFI\_PARTIAL|LVFI\_STRING;

\_stprintf\_s(ss, \_T("%d.%d.%d.%d"), m\_M1, m\_M2, m\_M3, m\_M4);
temp.psz = ss;
i = ipList.FindItem(&temp);
 
if(radBut1->GetState())
{
	if(m\_M1 && (i == -1 || lstrcmp(ipList.GetItemText(i, 0), temp.psz) != 0) )
	{
		ipList.InsertItem(s++, (LPCTSTR)ss);
		ipAdd.ClearAddress();
	}
}

else if(radBut2->GetState())
{

	if (i != -1 && lstrcmp(ipList.GetItemText(i, 0), temp.psz) == 0)
	{
		ipList.DeleteItem(i);
		s--;
	}

	else 
		MessageBox((LPCTSTR)L"Error: Address not found", (LPCTSTR)L"Delete Address", MB\_ICONWARNING | MB\_OK);


	ipAdd.ClearAddress();

		
}

[carter2000]

I think your code still has some problems. Consider the situation below: There are two items in CListCtrl. 111.111.111.111 111.111.111.11 And you enter 111.111.111.11 to insert the new item, see what happen. If I am right, it will insert successfully!!That may not be what you want.

[rahuljin]

got another solution ---

temp.flags = LVFI_STRING;

and everything becomes right.

modified on Monday, July 20, 2009 5:46 AM

[carter2000]

You are right. :)

[rahuljin]

in that case, 'i' will not be -1 and lstrcmp(ipList.GetItemText(i, 0), temp.psz) will be equal to zero because the item text and temp.psz will be same.

[carter2000]

Before you changed the "temp.flags = LVFI_PARTIAL|LVFI_STRING;" to "tem.flags=LVFI_STRING;", it's a wrong case exactly. But now it isn't. :)

[carter2000]

:)

LVFINDINFO temp;
CString ff;
temp.flags = LVFI\_STRING | LVFI\_PARTIAL;    
CStdioFile fileh;
fileh.Open(L"C:\\\\srvc.txt", CFile::modeRead);	
int i;
do	
{		
    if(fileh.ReadString(ff)== NULL) 		
    {			
        break;		
    }	
    temp.psz = ff.GetBuffer();	
    i = m\_objListCtrl.FindItem(&temp);
    if(lstrcmp(m\_objListCtrl.GetItemText(i, 0), temp.psz) == 0)	
    {		
        m\_objListCtrl.SetCheck(i, TRUE);	
    }		
}
while(ff.GetBuffer() != NULL);		
fileh.Close();

This can work in my computer, but I don't guarantee it could work in your computer. And by the way, I am in school now, but tomorrow I'll back home(There is no computer in my house :) ). It means I could not use computer for a long time. And I can't solve problem together with you, I'm sorry for that..

[rahuljin]

hello, is it possible to make edit control to take only numeric values and limited digits only ??? i have an edit control which is used for the port number, so i want that the user can enter only numeric value and 5 digits. any suggestion ??