giving error message according to Sql data
-
I wasn't "picking" on anyone nor did I criticize his perfectly valid solutions. His last response struck me as one who can't explain his position so comes back with playground response of "I know you are but what am I"
I know the language. I've read a book. - _Madmatt
Okay, but I just thought both of you (not just him) kinda went the "immature" route towards the end there.
Regards, Nish
My technology blog: voidnish.wordpress.com
-
In principal you are correct. But remember that exceptions are there for exceptional cases; pun intented. In the case of creating a new record where you expect the key to be unique, I agree with the others that using an exception is the correct approach. If there is a good chance that the key will not be unique then a different approach would be justified. There I would try to read the record with the key, if it does not exist then I would do the insert. I would however still have the try/catch on the insert.
Panic, Chaos, Destruction. My work here is done. or "Drink. Get drunk. Fall over." - P O'H OK, I will win to day or my name isn't Ethel Crudacre! - DD Ethel Crudacre
Nagy Vilmos wrote:
But remember that exceptions are there for exceptional cases
Yes, exactly for exceptional cases. I would use TryParse rather than Try/Catch but be prepared for UnhandledExceptions.
Nagy Vilmos wrote:
If there is a good chance that the key will not be unique then a different approach would be justified. There I would try to read the record with the key, if it does not exist then I would do the insert. I would however still have the try/catch on the insert.
Agreed. But the Try/Catch is to catch unexpected cases not the normal flow.
I know the language. I've read a book. - _Madmatt
-
Okay, but I just thought both of you (not just him) kinda went the "immature" route towards the end there.
Regards, Nish
My technology blog: voidnish.wordpress.com
Fair enough. Regardless, this is a good discussion.
I know the language. I've read a book. - _Madmatt
-
hey guys..i added a Unique constraint to a column in my sql table and if the user tries to add an existing data it gives error like that "Violation of UNIQUE KEY constraint 'ukc_cekilis_no'. Cannot insert duplicate key in object 'dbo.NumaraBilgileri'." it is ok..but i want to show an error message like that in my program..how i can check if the data already exist
Welcome to the code project, what is your iternicene debate of choice today, sir? :-)
Sort of a cross between Lawrence of Arabia and Dilbert.[^]
-Or-A Dead ringer for Kate Winslett[^] -
I believe Mark's argument is that, given that the described error condition is a likely occurrence, then the OP should code to detect and handle the condition directly, rather than rely on the exception mechanism (which is expensive).
Software Zen:
delete this;On a point of order, the exception mechanism isn't that expensive, except when compiled for debug. For live code it is similar to eventing see John Skeet's Blog: http://www.yoda.arachsys.com/csharp/exceptions.html[^].
Sort of a cross between Lawrence of Arabia and Dilbert.[^]
-Or-A Dead ringer for Kate Winslett[^] -
On a point of order, the exception mechanism isn't that expensive, except when compiled for debug. For live code it is similar to eventing see John Skeet's Blog: http://www.yoda.arachsys.com/csharp/exceptions.html[^].
Sort of a cross between Lawrence of Arabia and Dilbert.[^]
-Or-A Dead ringer for Kate Winslett[^]I was talking out of my hat, there. Generally speaking, exception mechanisms tend to be more expensive than normal control flow. In the SQL environment, that difference may be inconsequential compared to everything else that's going on.
Software Zen:
delete this; -
But do you know why it is bad practice? My point is that you shouldn't do something a certain way just because someone says so (even if that someone is Microsoft). Nothing in that article explains why you shouldn't use exceptions for program flow. If you had posted this[^] instead, that at least gives reasons related to performance. There should be real reasons behind why you code a certain way. If the original poster is not strong in SQL and has no method of source control for database schema then using the stored procedure solution makes it less maintainable. That probably outweighs the performance impact of the Exception use in one method of a small application. Blindly following a "best practice" without considering the specific situation is a bad idea. Consider this case[^] where it is a choice of one exception or 4 database roundtrips. Avoid dogma in code.
There's no hard and fast rules. But I agree with Mark. If a known condition can be tested for without relying on an exception, it's a best course of action. You cannot reliably know the behavior of a system as that system and its dependants rely on a failure mode, especially when any parts of the system get upgraded in the future. What may be an exception in one version may NOT be in the next.
A guide to posting questions on CodeProject[^]
Dave Kreskowiak -
I was talking out of my hat, there. Generally speaking, exception mechanisms tend to be more expensive than normal control flow. In the SQL environment, that difference may be inconsequential compared to everything else that's going on.
Software Zen:
delete this;Just being awkward really :-) As you say, whatever the code, the SQL hit is going to be the worst and swamp everything else. I agree with Mark's initial thoughts, you should avoid raising exceptions in the first place for the most part, but wouldn't vomit at the try/catch either ( I would avoid a re-throw though). The one thing I don't think should enter the equation is the performance (ironically, given my post), until it is known that it will adversely impact the system. Early optimisation wrecks good clean code. If there are problems, they are likely to involve a small proportion of the code, which should be optimised as fully as possible. That's my hapney'sworth anyway.
Sort of a cross between Lawrence of Arabia and Dilbert.[^]
-Or-A Dead ringer for Kate Winslett[^] -
hey guys..i added a Unique constraint to a column in my sql table and if the user tries to add an existing data it gives error like that "Violation of UNIQUE KEY constraint 'ukc_cekilis_no'. Cannot insert duplicate key in object 'dbo.NumaraBilgileri'." it is ok..but i want to show an error message like that in my program..how i can check if the data already exist
Well, this has certainly been an interesting debate. What nobody has seemed to point out so far is that you actually should combine the two techniques. This is for a simple reason - while you should certainly attempt to detect the unique key violation explicitly, there is no guarantee that this alone will work. The reason for this is simple, presumably your application is going to be multi-user; well, between the time you check the uniqueness and the actual insert occurs, another user could have inputted the same values. So, you have two checks in there - one to cope with the initial check, and a try/catch to cope with the database race condition. Simple. Job done.:thumbsup:
I have CDO, it's OCD with the letters in the right order; just as they ruddy well should be
Forgive your enemies - it messes with their heads
-
Well, this has certainly been an interesting debate. What nobody has seemed to point out so far is that you actually should combine the two techniques. This is for a simple reason - while you should certainly attempt to detect the unique key violation explicitly, there is no guarantee that this alone will work. The reason for this is simple, presumably your application is going to be multi-user; well, between the time you check the uniqueness and the actual insert occurs, another user could have inputted the same values. So, you have two checks in there - one to cope with the initial check, and a try/catch to cope with the database race condition. Simple. Job done.:thumbsup:
I have CDO, it's OCD with the letters in the right order; just as they ruddy well should be
Forgive your enemies - it messes with their heads
As I responded prior, I would use TryParse rather than Try/Catch but be prepared for UnhandledExceptions There is no one size fits all in software development and as the saying goes, they keep building better idiots.
I know the language. I've read a book. - _Madmatt
-
Well, this has certainly been an interesting debate. What nobody has seemed to point out so far is that you actually should combine the two techniques. This is for a simple reason - while you should certainly attempt to detect the unique key violation explicitly, there is no guarantee that this alone will work. The reason for this is simple, presumably your application is going to be multi-user; well, between the time you check the uniqueness and the actual insert occurs, another user could have inputted the same values. So, you have two checks in there - one to cope with the initial check, and a try/catch to cope with the database race condition. Simple. Job done.:thumbsup:
I have CDO, it's OCD with the letters in the right order; just as they ruddy well should be
Forgive your enemies - it messes with their heads
Pete O'Hanlon wrote:
So, you have two checks in there - one to cope with the initial check, and a try/catch to cope with the database race condition.
I wouldn't do both if the exception handling is going to be necessary anyway. I see no advantage to doing that (e.g., performance would probably be better the exception route anyway). I sometimes see this strategy when dealing with multithreaded applications (e.g., you check a condition that is fast and commonly results in false, then you lock, then you check that condition again). However, I don't think that technique applies here, so I'd just go with the exception handling.
-
As I responded prior, I would use TryParse rather than Try/Catch but be prepared for UnhandledExceptions There is no one size fits all in software development and as the saying goes, they keep building better idiots.
I know the language. I've read a book. - _Madmatt
What does TryParse have to do with attempting to insert a duplicate key?
-
Pete O'Hanlon wrote:
So, you have two checks in there - one to cope with the initial check, and a try/catch to cope with the database race condition.
I wouldn't do both if the exception handling is going to be necessary anyway. I see no advantage to doing that (e.g., performance would probably be better the exception route anyway). I sometimes see this strategy when dealing with multithreaded applications (e.g., you check a condition that is fast and commonly results in false, then you lock, then you check that condition again). However, I don't think that technique applies here, so I'd just go with the exception handling.
The reason for the first is simply that you are giving the user information up front that the item already exists. The try/catch is for the really exceptional case where there's a race condition.
I have CDO, it's OCD with the letters in the right order; just as they ruddy well should be
Forgive your enemies - it messes with their heads
-
There's no hard and fast rules. But I agree with Mark. If a known condition can be tested for without relying on an exception, it's a best course of action. You cannot reliably know the behavior of a system as that system and its dependants rely on a failure mode, especially when any parts of the system get upgraded in the future. What may be an exception in one version may NOT be in the next.
A guide to posting questions on CodeProject[^]
Dave KreskowiakDave Kreskowiak wrote:
If a known condition can be tested for without relying on an exception, it's a best course of action.
Well, I wouldn't say that's always true. Imagine if TryParse didn't exist. Would you rather Try/Catch a Parse or re-implement a version of parse that returns a bool if the string is invalid? Given the complexity of number formats (e.g., scientific notation), I would just do a Try/Catch. I guess this can be generalized as: If a known condition is exceptionally complex to test for, then just use exception handling to test if it's valid. Here's another example. I built a tool that allows the user to enter a regular expression to match against some data. Rather than validate that the regular expression is valid, I just used Try/Catch to catch exceptions thrown by invalid exceptions. I mean I COULD first check if the regular expression is valid, but it would be exceedingly complex and a waste of time when the test for validity already exists in the form of exception handling.
-
You could catch that particular exception. You could use a stored procedure to do the insert that checks first and returns a value that tells you what happened. A third option would be to query before you do the insert, but that is inefficient as you are making two trips to the database instead of just one.
Programming by error - using an error in the normal flow of an operation. This is using the error trap is incorrect.
Never underestimate the power of human stupidity RAH
-
The reason for the first is simply that you are giving the user information up front that the item already exists. The try/catch is for the really exceptional case where there's a race condition.
I have CDO, it's OCD with the letters in the right order; just as they ruddy well should be
Forgive your enemies - it messes with their heads
I'd say that depends on the code/application. If the distinction between it being a race condition and it being an old duplicate key is unimportant, then I'd go with exception handling. If the race condition should be handled differently, then it makes sense to do both.
-
hey guys..i added a Unique constraint to a column in my sql table and if the user tries to add an existing data it gives error like that "Violation of UNIQUE KEY constraint 'ukc_cekilis_no'. Cannot insert duplicate key in object 'dbo.NumaraBilgileri'." it is ok..but i want to show an error message like that in my program..how i can check if the data already exist
Your problem is not how to deal with the error, the problem is what is the CAUSE of the error. There is no excuse for primary key violation and it is up to the developer to make sure the exception cannot arise in the normal flow of the program.
erdinc27 wrote:
if the user tries to add an existing data it gives error like that
I suspect you are inserting instead of updating a record.
Never underestimate the power of human stupidity RAH
-
What does TryParse have to do with attempting to insert a duplicate key?
The statement is in regard to exception handling in general, which is what the debate is about, not a specific, narrow case of one type of SqlException
I know the language. I've read a book. - _Madmatt
-
The statement is in regard to exception handling in general, which is what the debate is about, not a specific, narrow case of one type of SqlException
I know the language. I've read a book. - _Madmatt
Ah, thanks for clearing that up. I was a touch confused on this.
I'm not a stalker, I just know things. Oh by the way, you're out of milk.
Forgive your enemies - it messes with their heads
-
Your problem is not how to deal with the error, the problem is what is the CAUSE of the error. There is no excuse for primary key violation and it is up to the developer to make sure the exception cannot arise in the normal flow of the program.
erdinc27 wrote:
if the user tries to add an existing data it gives error like that
I suspect you are inserting instead of updating a record.
Never underestimate the power of human stupidity RAH
10!