DataGridView.Column("name").DefaultCellStyle.Format applied to all columns (it shouldn't be)
-
I doubt there is a problem with DefaultCellStyle. The DefaultCellStyle only applies to the column you set it in, not to all columns. Set a breakpoint on the For Each line and step through the code in the debugger, line by line, so you can see what the code is seeing and doing. I really wouldn't use the ``Like`` operator here since it's intended for pattern matching, not outright equality.
A guide to posting questions on CodeProject
Click this: Asking questions is a skill. Seriously, do it.
Dave KreskowiakHi Dave, Thanks, I will try step through. Regards, Johan P.S. In the real code I am matching a pattern, it appears that the stars were dropped by the codeproject editor.
My advice is free, and you may get what you paid for.
-
Hi, In VB the switch works like this. In other words, "Select the first case which' outcome conforms to the main statement". It appears that the codeproject editor dropped the stars from the pattern matching. Regards, Johan
My advice is free, and you may get what you paid for.
-
I doubt there is a problem with DefaultCellStyle. The DefaultCellStyle only applies to the column you set it in, not to all columns. Set a breakpoint on the For Each line and step through the code in the debugger, line by line, so you can see what the code is seeing and doing. I really wouldn't use the ``Like`` operator here since it's intended for pattern matching, not outright equality.
A guide to posting questions on CodeProject
Click this: Asking questions is a skill. Seriously, do it.
Dave KreskowiakOk, so I tried step through, and the only thing unexpected that I see, is that once the Format property has been set for a column in the loop, that setting is maintained through subsequent loops, until changed (again). So unless this is a bug or some cache issue in the debugging process, showing the value of a property incorrectly, I suppose it is possible that properties of the DefaultCellStyle, accessed through the column, get set for all columns in the DataGridView, not just for that specific column. I have worked around this by using:
DataGridViewCell.Style.Format
, but it takes noticeably longer now that I need to apply formatting one cell at a time.
My advice is free, and you may get what you paid for.
-
Hi, In VB the switch works like this. In other words, "Select the first case which' outcome conforms to the main statement". It appears that the codeproject editor dropped the stars from the pattern matching. Regards, Johan
My advice is free, and you may get what you paid for.
-
Ok, so I tried step through, and the only thing unexpected that I see, is that once the Format property has been set for a column in the loop, that setting is maintained through subsequent loops, until changed (again). So unless this is a bug or some cache issue in the debugging process, showing the value of a property incorrectly, I suppose it is possible that properties of the DefaultCellStyle, accessed through the column, get set for all columns in the DataGridView, not just for that specific column. I have worked around this by using:
DataGridViewCell.Style.Format
, but it takes noticeably longer now that I need to apply formatting one cell at a time.
My advice is free, and you may get what you paid for.
Nope. ``DefaultCellStyle`` applies ONLY to the column that it is set on. Also, there is no debugging "cache". I coudln't tell you what's going on because we simply don't have enough information on your code and how the rest of the grid is setup.
A guide to posting questions on CodeProject
Click this: Asking questions is a skill. Seriously, do it.
Dave Kreskowiak -
Nope. ``DefaultCellStyle`` applies ONLY to the column that it is set on. Also, there is no debugging "cache". I coudln't tell you what's going on because we simply don't have enough information on your code and how the rest of the grid is setup.
A guide to posting questions on CodeProject
Click this: Asking questions is a skill. Seriously, do it.
Dave KreskowiakHi Dave, Would it suffice if I tell you the steps (in pseudo code) ? 1. Open Visual Studio 2012 Express 2. Start new Windows Forms project (.NET 4) 3. Drag DataGridView and button controls onto Window 4. Press button = - Use SqlCommand to run MS SQL stored procedure that returns a table - Use SqlDataAdapter to enter data into DataSet 5. BindingSource.DataSource = DataSet 6. DataGridView.DataSource = BindingSource 7. Run Method as in my original post Regards, Johan
My advice is free, and you may get what you paid for.
-
Hi Dave, Would it suffice if I tell you the steps (in pseudo code) ? 1. Open Visual Studio 2012 Express 2. Start new Windows Forms project (.NET 4) 3. Drag DataGridView and button controls onto Window 4. Press button = - Use SqlCommand to run MS SQL stored procedure that returns a table - Use SqlDataAdapter to enter data into DataSet 5. BindingSource.DataSource = DataSet 6. DataGridView.DataSource = BindingSource 7. Run Method as in my original post Regards, Johan
My advice is free, and you may get what you paid for.
Johan Hakkesteegt wrote:
Would it suffice if I tell you the steps (in pseudo code) ?
No, because that is what you THINK the code is doing. The real code is required to show what the code is ACTUALLY doing.
A guide to posting questions on CodeProject
Click this: Asking questions is a skill. Seriously, do it.
Dave Kreskowiak -
Johan Hakkesteegt wrote:
Would it suffice if I tell you the steps (in pseudo code) ?
No, because that is what you THINK the code is doing. The real code is required to show what the code is ACTUALLY doing.
A guide to posting questions on CodeProject
Click this: Asking questions is a skill. Seriously, do it.
Dave KreskowiakHi Dave, You were right (as usual). I found that I was calling another method (see below) before using the one I posted originally. When I commented this one out, the first method worked as expected. Looking at it though, I don't see how this method caused the unexpected behavior. As far as I can tell, it is pretty much doing the same thing.
Public Sub FormatTable(ByVal dgv As DataGridView)
Dim cs_Default As New DataGridViewCellStyle(dgv.DefaultCellStyle)
Dim cs_Money As New DataGridViewCellStyle(cs_Default)
Dim cs_Date As New DataGridViewCellStyle(cs_Default)
Dim cs_String As New DataGridViewCellStyle(cs_Default)
Dim cs_Integer As New DataGridViewCellStyle(cs_Default)
Try
With cs_Date
.Alignment = DataGridViewContentAlignment.MiddleLeft
End With
With cs_Money
.Alignment = DataGridViewContentAlignment.MiddleRight
.Format = "F"
End With
With cs_Integer
.Alignment = DataGridViewContentAlignment.MiddleRight
.Format = "N0"
End With
With cs_String
.Alignment = DataGridViewContentAlignment.MiddleLeft
End With
For Each clm As DataGridViewColumn In dgv.Columns
Select Case clm.ValueType
Case Type_Double, Type_Long, Type_Decimal
clm.DefaultCellStyle = cs_Money
Case Type_Integer
clm.DefaultCellStyle = cs_Integer
Case Type_String
clm.DefaultCellStyle = cs_String
End Select
Next
Catch ex As Exception
EC(ex)
End Try
End SubRegards, Johan
My advice is free, and you may get what you paid for.
-
Hi Dave, You were right (as usual). I found that I was calling another method (see below) before using the one I posted originally. When I commented this one out, the first method worked as expected. Looking at it though, I don't see how this method caused the unexpected behavior. As far as I can tell, it is pretty much doing the same thing.
Public Sub FormatTable(ByVal dgv As DataGridView)
Dim cs_Default As New DataGridViewCellStyle(dgv.DefaultCellStyle)
Dim cs_Money As New DataGridViewCellStyle(cs_Default)
Dim cs_Date As New DataGridViewCellStyle(cs_Default)
Dim cs_String As New DataGridViewCellStyle(cs_Default)
Dim cs_Integer As New DataGridViewCellStyle(cs_Default)
Try
With cs_Date
.Alignment = DataGridViewContentAlignment.MiddleLeft
End With
With cs_Money
.Alignment = DataGridViewContentAlignment.MiddleRight
.Format = "F"
End With
With cs_Integer
.Alignment = DataGridViewContentAlignment.MiddleRight
.Format = "N0"
End With
With cs_String
.Alignment = DataGridViewContentAlignment.MiddleLeft
End With
For Each clm As DataGridViewColumn In dgv.Columns
Select Case clm.ValueType
Case Type_Double, Type_Long, Type_Decimal
clm.DefaultCellStyle = cs_Money
Case Type_Integer
clm.DefaultCellStyle = cs_Integer
Case Type_String
clm.DefaultCellStyle = cs_String
End Select
Next
Catch ex As Exception
EC(ex)
End Try
End SubRegards, Johan
My advice is free, and you may get what you paid for.
There is probably something in between this method and the other one. Having multiple methods to format a grid is a bad idea because of the problem you're running into, though it's, sadly, kind of common. If I have multiple grids I need formatted differently, but overall styled the same, I normally create my own DGV class, inheriting from the .NET DGV, setup the base styles common to all grids, then use that I my forms. When I need to setup formatting, I have a method on the form that hosts the grid explicitly setting up the one grid instance with the things that are over and above the items setup in the base grid. This sometimes results in a duplication of code but I consider that a small price to pay for flexibility when I need to change a grid here and there. Now, you might want to step through this code and the other code. It would appear that you're replacing the entire style of a column instead of making changes to it. If this code is called to setup your grid and then you call the other method to further change it you could be replacing the styles from one method with the styles from another instead of making changes to the style that is in place.
A guide to posting questions on CodeProject
Click this: Asking questions is a skill. Seriously, do it.
Dave Kreskowiak -
There is probably something in between this method and the other one. Having multiple methods to format a grid is a bad idea because of the problem you're running into, though it's, sadly, kind of common. If I have multiple grids I need formatted differently, but overall styled the same, I normally create my own DGV class, inheriting from the .NET DGV, setup the base styles common to all grids, then use that I my forms. When I need to setup formatting, I have a method on the form that hosts the grid explicitly setting up the one grid instance with the things that are over and above the items setup in the base grid. This sometimes results in a duplication of code but I consider that a small price to pay for flexibility when I need to change a grid here and there. Now, you might want to step through this code and the other code. It would appear that you're replacing the entire style of a column instead of making changes to it. If this code is called to setup your grid and then you call the other method to further change it you could be replacing the styles from one method with the styles from another instead of making changes to the style that is in place.
A guide to posting questions on CodeProject
Click this: Asking questions is a skill. Seriously, do it.
Dave KreskowiakThanks Dave, I will look into that. Thanks for the help !
My advice is free, and you may get what you paid for.