placeholder
-
I did it this way cbx = New CheckBox cbx.ID = resourceid cbx.Text = txt cbx.ToolTip = desc phDiv.Controls.Add(cbx) So everything is under the properties of checkbox. So there is no need and cannot have the fincontrol method. I have tried that but it doesnt goes it the loop.Probably because there is only a checkbox and nothing else inside. Therefore i tried the method above. The coding is done is a method. However when i want to checked if the checkbox in placeholder is selected anot (in another method) It cannot access. For i=0 to ph.controls.count-1 It can capture the number of controls. Is this due to the coding in different method? But it should be okie i guess. Cause the placeholder is a existing control in the web form. What went wrong?
Try this, or something like it:
Private Sub Page\_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load If IsPostBack And CType(Session("CheckBox"), Boolean) Then CreateDynamicCheckbox() End If End Sub Private Sub CreateCheckBox\_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles CreateCheckBox.Click CreateDynamicCheckbox() End Sub Private Sub CreateDynamicCheckbox() Dim cb As New CheckBox cb.ID = "MyCheckBox" cb.Text = "Check Me" cb.Checked = True PlaceHolder1.Controls.Add(cb) Session("CheckBox") = True End Sub Private Sub RevealCheckBoxValue\_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles RevealCheckBoxValue.Click Dim cb As CheckBox = CType(PlaceHolder1.FindControl("MyCheckBox"), CheckBox) Label1.Text = "MyCheckBox value is " + cb.Checked.ToString() End SubWhat a piece of work is man, how noble in reason, how infinite in faculties, in form and moving how express and admirable . . . and yet to me, what is this quintessence of dust? -- Hamlet, Act II, Scene ii.
-
Try this, or something like it:
Private Sub Page\_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load If IsPostBack And CType(Session("CheckBox"), Boolean) Then CreateDynamicCheckbox() End If End Sub Private Sub CreateCheckBox\_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles CreateCheckBox.Click CreateDynamicCheckbox() End Sub Private Sub CreateDynamicCheckbox() Dim cb As New CheckBox cb.ID = "MyCheckBox" cb.Text = "Check Me" cb.Checked = True PlaceHolder1.Controls.Add(cb) Session("CheckBox") = True End Sub Private Sub RevealCheckBoxValue\_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles RevealCheckBoxValue.Click Dim cb As CheckBox = CType(PlaceHolder1.FindControl("MyCheckBox"), CheckBox) Label1.Text = "MyCheckBox value is " + cb.Checked.ToString() End SubWhat a piece of work is man, how noble in reason, how infinite in faculties, in form and moving how express and admirable . . . and yet to me, what is this quintessence of dust? -- Hamlet, Act II, Scene ii.
I have 3 checkboxes in my placeholder and i did as follows: **Private Sub Page_Load(**ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load If IsPostBack And CType(Session("Checkbox"), Boolean) Then createcheckbox() End If Private sub createcheckbox() txt = ownCname & " / " & ownDiv & " - " & resourcename & " ( " & capacity & " ) " cbx = New CheckBox cbx.ID = "MYCHECKBOX" cbx.Text = txt cbx.ToolTip = desc phDiv.Controls.Add(cbx) Session("Checkbox") = True ens sub private sub createcalendar() Dim cb As CheckBox = CType(phDiv.FindControl("MYCHECKBOX"), CheckBox) If cb.Checked = True Then rname = cb.Text : : End Sub Private Sub btnGo_Click(ByVal sender As System.Object, ByVal e As System.Web.UI.ImageClickEventArgs) Handles btnGo.Click createCalendar() End sub Am i wrong to do it this way? However, this works perfectly for the first checkbox in the placeholder if it's checked. If the second checkbox is selected, this code cant works. anythng wrong with my codes?Or i should set the cb.checked to true for all?
-
I have 3 checkboxes in my placeholder and i did as follows: **Private Sub Page_Load(**ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load If IsPostBack And CType(Session("Checkbox"), Boolean) Then createcheckbox() End If Private sub createcheckbox() txt = ownCname & " / " & ownDiv & " - " & resourcename & " ( " & capacity & " ) " cbx = New CheckBox cbx.ID = "MYCHECKBOX" cbx.Text = txt cbx.ToolTip = desc phDiv.Controls.Add(cbx) Session("Checkbox") = True ens sub private sub createcalendar() Dim cb As CheckBox = CType(phDiv.FindControl("MYCHECKBOX"), CheckBox) If cb.Checked = True Then rname = cb.Text : : End Sub Private Sub btnGo_Click(ByVal sender As System.Object, ByVal e As System.Web.UI.ImageClickEventArgs) Handles btnGo.Click createCalendar() End sub Am i wrong to do it this way? However, this works perfectly for the first checkbox in the placeholder if it's checked. If the second checkbox is selected, this code cant works. anythng wrong with my codes?Or i should set the cb.checked to true for all?
Ahhhh... second checkbox! You need essentially the same kind of code for each object; you could re-write the same code over and over, or do something generic (like a sub that generates a checkbox that takes as its parameters a container and an ID)... but whatever you do, ensure that each checkbox is different -- a different id, at least, by which you can identify it. What a piece of work is man, how noble in reason, how infinite in faculties, in form and moving how express and admirable . . . and yet to me, what is this quintessence of dust? -- Hamlet, Act II, Scene ii.
-
Ahhhh... second checkbox! You need essentially the same kind of code for each object; you could re-write the same code over and over, or do something generic (like a sub that generates a checkbox that takes as its parameters a container and an ID)... but whatever you do, ensure that each checkbox is different -- a different id, at least, by which you can identify it. What a piece of work is man, how noble in reason, how infinite in faculties, in form and moving how express and admirable . . . and yet to me, what is this quintessence of dust? -- Hamlet, Act II, Scene ii.
The checkboxes are kind of functioning now. But i think due to the pageload codes, there are some confusion or whatsoever because when i first view the page, everything works perfectly. However, when page ispostback, upon the first button click, no event was called. Only when i clicked the 2nd time the table is then generated. Why is this so? Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load 'Put user code to initialize the page here If IsPostBack And CType(Session("Checkbox"), Boolean) Then createcheckbox() End If If Not Session("ButtonCreated") Is Nothing Then buttoncreated = CType(Session("ButtonCreated"), Boolean) Else buttoncreated = False End If If IsPostBack And buttoncreated Then createCalendar() End If End sub Is it due to the 2 different tracking(one for the checkbox and one for the imagebutton)? Only either one can work at a time, not concurrently. Now that mine checkbox can work, my imagebutton cant(which workly perfectly the other day).
-
Ahhhh... second checkbox! You need essentially the same kind of code for each object; you could re-write the same code over and over, or do something generic (like a sub that generates a checkbox that takes as its parameters a container and an ID)... but whatever you do, ensure that each checkbox is different -- a different id, at least, by which you can identify it. What a piece of work is man, how noble in reason, how infinite in faculties, in form and moving how express and admirable . . . and yet to me, what is this quintessence of dust? -- Hamlet, Act II, Scene ii.
-Now the checkboxes work but the imagebutton click cannot(which work perfectly the previous time). Is this due the the page load code where both ispostback are place together? Both can work if only they are on different forms and only one can function in the particualar form. -one more problem:(checkbox) when i first view a particular page, everything was displayed as expected. however, when i make another selection (which is page ispostback), I'm able to view the data on the second button click. Which means when i first select and click on the button, no event was called but the breaskpoint did step into the method. Only upon 2nd selection and buttonClick, the data was then displayed. Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load 'Put user code to initialize the page here If IsPostBack And CType(Session("Checkbox"), Boolean) Then-->checkbox createcheckbox() End If If Not Session("ButtonCreated") Is Nothing Then---> imagebutton buttoncreated = CType(Session("ButtonCreated"), Boolean) Else buttoncreated = False End If If IsPostBack And buttoncreated Then createCalendar() End If End sub Is this due to the code in the page load? These are the codes you gave me and i have edited some and implement it
-
-Now the checkboxes work but the imagebutton click cannot(which work perfectly the previous time). Is this due the the page load code where both ispostback are place together? Both can work if only they are on different forms and only one can function in the particualar form. -one more problem:(checkbox) when i first view a particular page, everything was displayed as expected. however, when i make another selection (which is page ispostback), I'm able to view the data on the second button click. Which means when i first select and click on the button, no event was called but the breaskpoint did step into the method. Only upon 2nd selection and buttonClick, the data was then displayed. Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load 'Put user code to initialize the page here If IsPostBack And CType(Session("Checkbox"), Boolean) Then-->checkbox createcheckbox() End If If Not Session("ButtonCreated") Is Nothing Then---> imagebutton buttoncreated = CType(Session("ButtonCreated"), Boolean) Else buttoncreated = False End If If IsPostBack And buttoncreated Then createCalendar() End If End sub Is this due to the code in the page load? These are the codes you gave me and i have edited some and implement it
Right... well... hmmm... The code I gave you was fairly generalized and not particularly optimized to a particular implementation. Therefore, it is difficult to characterize what you've shown here as "right" or "wrong". If anything, I'd refactor and simplify as much as possible:
Protected checkboxExists As Boolean
Protected buttonExists As BooleanPrivate Sub Page_Load(...) ...
If IsPostBack Then
Dim checkboxExists As Boolean = CType(Session("Checkbox"), Boolean)
Dim buttonExists As Boolean = CType(Session("ButtonCreated"), Boolean)
If checkboxExists Then
createCheckBox()
End If
If buttonExists Then
createCalendar()
End If
End If
Session("CheckBox") = checkboxExists
Session("ButtonCreated") = buttonExists
End SubThis is normally the point at which it becomes increasingly difficult to impart any significant advice, unless there is something specific that is terribly wrong; at this point, you have to {code, test, debug} as many times as it takes to get it right. What a piece of work is man, how noble in reason, how infinite in faculties, in form and moving how express and admirable . . . and yet to me, what is this quintessence of dust? -- Hamlet, Act II, Scene ii.
-
Right... well... hmmm... The code I gave you was fairly generalized and not particularly optimized to a particular implementation. Therefore, it is difficult to characterize what you've shown here as "right" or "wrong". If anything, I'd refactor and simplify as much as possible:
Protected checkboxExists As Boolean
Protected buttonExists As BooleanPrivate Sub Page_Load(...) ...
If IsPostBack Then
Dim checkboxExists As Boolean = CType(Session("Checkbox"), Boolean)
Dim buttonExists As Boolean = CType(Session("ButtonCreated"), Boolean)
If checkboxExists Then
createCheckBox()
End If
If buttonExists Then
createCalendar()
End If
End If
Session("CheckBox") = checkboxExists
Session("ButtonCreated") = buttonExists
End SubThis is normally the point at which it becomes increasingly difficult to impart any significant advice, unless there is something specific that is terribly wrong; at this point, you have to {code, test, debug} as many times as it takes to get it right. What a piece of work is man, how noble in reason, how infinite in faculties, in form and moving how express and admirable . . . and yet to me, what is this quintessence of dust? -- Hamlet, Act II, Scene ii.
Well, this problem has been solved. However, the imagebutton still can't work!! It works before i add the mouseover tooltip. Stil wondering what went wrong. Can help? The codes in page_load is the same as above(what you gave) Createcalendar subroutin when i create the imagebutton: Dim img As New ImageButton AddHandler img.Click, AddressOf ImageClickHandler img.ImageUrl = Server.MapPath("Pics\pencil.gif") cellleft.Controls.Add(img) row.Controls.Add(cellleft) buttoncreated = True Session("ButtonCreated") = buttoncreated what went wrong? :sigh:
-
Right... well... hmmm... The code I gave you was fairly generalized and not particularly optimized to a particular implementation. Therefore, it is difficult to characterize what you've shown here as "right" or "wrong". If anything, I'd refactor and simplify as much as possible:
Protected checkboxExists As Boolean
Protected buttonExists As BooleanPrivate Sub Page_Load(...) ...
If IsPostBack Then
Dim checkboxExists As Boolean = CType(Session("Checkbox"), Boolean)
Dim buttonExists As Boolean = CType(Session("ButtonCreated"), Boolean)
If checkboxExists Then
createCheckBox()
End If
If buttonExists Then
createCalendar()
End If
End If
Session("CheckBox") = checkboxExists
Session("ButtonCreated") = buttonExists
End SubThis is normally the point at which it becomes increasingly difficult to impart any significant advice, unless there is something specific that is terribly wrong; at this point, you have to {code, test, debug} as many times as it takes to get it right. What a piece of work is man, how noble in reason, how infinite in faculties, in form and moving how express and admirable . . . and yet to me, what is this quintessence of dust? -- Hamlet, Act II, Scene ii.
-
How many ImageButton controls are you creating and how many times is the method called? What a piece of work is man, how noble in reason, how infinite in faculties, in form and moving how express and admirable . . . and yet to me, what is this quintessence of dust? -- Hamlet, Act II, Scene ii.
-
How many ImageButton controls are you creating and how many times is the method called? What a piece of work is man, how noble in reason, how infinite in faculties, in form and moving how express and admirable . . . and yet to me, what is this quintessence of dust? -- Hamlet, Act II, Scene ii.
One imagebutton is created when the date is >=date.today and also depends on the number of records in the database. So it hard for me to estimate the number imagebutton controls i wil be creating. It will check against the date and number of records in database. How many time the method is called depends on the number of rows.
-
How many ImageButton controls are you creating and how many times is the method called? What a piece of work is man, how noble in reason, how infinite in faculties, in form and moving how express and admirable . . . and yet to me, what is this quintessence of dust? -- Hamlet, Act II, Scene ii.
-
How many ImageButton controls are you creating and how many times is the method called? What a piece of work is man, how noble in reason, how infinite in faculties, in form and moving how express and admirable . . . and yet to me, what is this quintessence of dust? -- Hamlet, Act II, Scene ii.
-
help help PLEASE...........................................................................urgent
Sorry about the delay -- Holiday weekend and all. I tried to get this to work, but I couldn't, either. :( Have you considered abandoning the default Calendar control and creating your own class? What a piece of work is man, how noble in reason, how infinite in faculties, in form and moving how express and admirable . . . and yet to me, what is this quintessence of dust? -- Hamlet, Act II, Scene ii.
-
Sorry about the delay -- Holiday weekend and all. I tried to get this to work, but I couldn't, either. :( Have you considered abandoning the default Calendar control and creating your own class? What a piece of work is man, how noble in reason, how infinite in faculties, in form and moving how express and admirable . . . and yet to me, what is this quintessence of dust? -- Hamlet, Act II, Scene ii.
-
mmmm..............:(( Have you considered abandoning the default Calendar control and creating your own class?:confused: I really have no idea what to do now...:mad: :confused::~ :confused::~ :confused::~ :confused::~
Sorry, :(( My brain ceased to function on this one. What a piece of work is man, how noble in reason, how infinite in faculties, in form and moving how express and admirable . . . and yet to me, what is this quintessence of dust? -- Hamlet, Act II, Scene ii.
-
Sorry, :(( My brain ceased to function on this one. What a piece of work is man, how noble in reason, how infinite in faculties, in form and moving how express and admirable . . . and yet to me, what is this quintessence of dust? -- Hamlet, Act II, Scene ii.
-
Sorry, :(( My brain ceased to function on this one. What a piece of work is man, how noble in reason, how infinite in faculties, in form and moving how express and admirable . . . and yet to me, what is this quintessence of dust? -- Hamlet, Act II, Scene ii.
-
Sorry, :(( My brain ceased to function on this one. What a piece of work is man, how noble in reason, how infinite in faculties, in form and moving how express and admirable . . . and yet to me, what is this quintessence of dust? -- Hamlet, Act II, Scene ii.
-
There must be something that links them together right? If not how come with the same code and just he change of checkbox codes, everything can't work??? Im going crazy soon.. Have been trying several ways..
Well, yes... I'm not certain which snippet you're referring to, but in general, bear in mind that you're writing code that responds to particular events and each control event is independent of others on the same page, except for the page level events, that fire each time the page loads or posts. So, if, for example, I write an event handler for a button that creates a checkbox dynamically and stores some indication of that in Session, and later on I write an event handler that responds to the click event of another control that also dynamically creates something, I have to store some other indicator of that in Session as well, and so on, for each thing that I do. Do you see? If need be, I can point to the places in MSDN that describe the sequence of events and ASP session or state management. What a piece of work is man, how noble in reason, how infinite in faculties, in form and moving how express and admirable . . . and yet to me, what is this quintessence of dust? -- Hamlet, Act II, Scene ii.
-
Well, yes... I'm not certain which snippet you're referring to, but in general, bear in mind that you're writing code that responds to particular events and each control event is independent of others on the same page, except for the page level events, that fire each time the page loads or posts. So, if, for example, I write an event handler for a button that creates a checkbox dynamically and stores some indication of that in Session, and later on I write an event handler that responds to the click event of another control that also dynamically creates something, I have to store some other indicator of that in Session as well, and so on, for each thing that I do. Do you see? If need be, I can point to the places in MSDN that describe the sequence of events and ASP session or state management. What a piece of work is man, how noble in reason, how infinite in faculties, in form and moving how express and admirable . . . and yet to me, what is this quintessence of dust? -- Hamlet, Act II, Scene ii.
Now I can leave out the dynamic checkboxes. Will be using checkboxlist instead (which can wotk with the dynamic imagebutton the previous time), so i guess this wouldn't be much of a problem as compare to the dynamic checkbox, am i right? However, I got to run the weekly form before i can click the button of the daily?
Page load If Not Session("ButtonCreated") Is Nothing Then buttoncreated = CType(Session("ButtonCreated"), Boolean) Else buttoncreated = False End If If IsPostBack And buttoncreated Then createCalendar() End If private sub createcalendar() imgholi.ID = rid imgholi.ImageUrl = Server.MapPath("Pics\pencil.gif") AddHandler imgholi.Click, AddressOf ImageClickHandler cellleft.Controls.Add(imgholi) buttoncreated = True Session("ButtonCreated") = buttoncreatedi have 3 calendars(Daily, weekly, monthly). If i were to select the daily calendar and click on the imagebtn, the table refreshes unless i select the weekly calendar and click the imgbtn. why?