Edit Control - calculator
-
I'm looking for a "edit" type control where the user can enter and equation mixing units (metric / english), etc including +,-,*,/..... Thanks in advance Tony Teveris Gerber Scientific Products Senior Software Engineer Phone: 860 648 8151 Fax: 860 648 8214 83 Gerber Road West South Windsor, CT 06074
-
I'm looking for a "edit" type control where the user can enter and equation mixing units (metric / english), etc including +,-,*,/..... Thanks in advance Tony Teveris Gerber Scientific Products Senior Software Engineer Phone: 860 648 8151 Fax: 860 648 8214 83 Gerber Road West South Windsor, CT 06074
:doh: I think your question is not very well formulated ! Because the standard edit control accept those characters... What are you looking for exactly ? Maybe you want to implement a kind of parser or xomething like that ? If yes, look in the articles of this website, there is a section about parsers (don't remember exactly where). Otherwise, try to be a little bit more explicit.
-
I'm looking for a "edit" type control where the user can enter and equation mixing units (metric / english), etc including +,-,*,/..... Thanks in advance Tony Teveris Gerber Scientific Products Senior Software Engineer Phone: 860 648 8151 Fax: 860 648 8214 83 Gerber Road West South Windsor, CT 06074
try Tox parser http://www.codeproject.com/cpp/VisualCalc.asp[^]
"Opinions are neither right nor wrong. I cannot change your opinion. I can, however, change what influences your opinion." - David Crow
cheers, Alok Gupta
-
try Tox parser http://www.codeproject.com/cpp/VisualCalc.asp[^]
"Opinions are neither right nor wrong. I cannot change your opinion. I can, however, change what influences your opinion." - David Crow
cheers, Alok Gupta
Thats what I want - Thank you Tony Teveris Gerber Scientific Products Senior Software Engineer Phone: 860 648 8151 Fax: 860 648 8214 83 Gerber Road West South Windsor, CT 06074
-
Thats what I want - Thank you Tony Teveris Gerber Scientific Products Senior Software Engineer Phone: 860 648 8151 Fax: 860 648 8214 83 Gerber Road West South Windsor, CT 06074
-
I'm looking for a "edit" type control where the user can enter and equation mixing units (metric / english), etc including +,-,*,/..... Thanks in advance Tony Teveris Gerber Scientific Products Senior Software Engineer Phone: 860 648 8151 Fax: 860 648 8214 83 Gerber Road West South Windsor, CT 06074
See these masked edit controls.
"Ideas are a dime a dozen. People who put them into action are priceless." - Unknown
-
try Tox parser http://www.codeproject.com/cpp/VisualCalc.asp[^]
"Opinions are neither right nor wrong. I cannot change your opinion. I can, however, change what influences your opinion." - David Crow
cheers, Alok Gupta
-
hey, very interesting, i'll have a look at this !!! :-D :rose:
TOXCCT >>> GEII power
[toxcct][VisualCalc]toxcct wrote: i'll have a look at this So,Whats your opinion about that :)
"Opinions are neither right nor wrong. I cannot change your opinion. I can, however, change what influences your opinion." - David Crow
cheers, Alok Gupta
-
toxcct wrote: i'll have a look at this So,Whats your opinion about that :)
"Opinions are neither right nor wrong. I cannot change your opinion. I can, however, change what influences your opinion." - David Crow
cheers, Alok Gupta
actually, i think it's far from being perfect... i really liked to add formal calculation into it (like
"x + x"returning"2x") i also like to add more personalization, like allowing the users to configure the number of digits they'd like to appearing as a result, etc... I also thought (one day i was dreaming too much) to adding a graphical area to draw functions (2D or 3D why not :-D ) but i saddly don't have enough time to make all these at the moment... hey, you know what ? i really liked to share this with you (if you agree of course)... it would be grateful to me if you accepted to become my co-author on that article, or at least, help me with some useful tips/suggestions... i'm waiting for your answer "hurrily" sincerly,
TOXCCT >>> GEII power
[toxcct][VisualCalc] -
actually, i think it's far from being perfect... i really liked to add formal calculation into it (like
"x + x"returning"2x") i also like to add more personalization, like allowing the users to configure the number of digits they'd like to appearing as a result, etc... I also thought (one day i was dreaming too much) to adding a graphical area to draw functions (2D or 3D why not :-D ) but i saddly don't have enough time to make all these at the moment... hey, you know what ? i really liked to share this with you (if you agree of course)... it would be grateful to me if you accepted to become my co-author on that article, or at least, help me with some useful tips/suggestions... i'm waiting for your answer "hurrily" sincerly,
TOXCCT >>> GEII power
[toxcct][VisualCalc]toxcct wrote: i really liked to share this with you (if you agree of course)... it would be grateful to me Thanks for offer :),I need some time to think over it if you don't mind. I amn't Intelligent as you,you know many thing which I still learning :). toxcct wrote: help me with some useful tips/suggestions... Hain no thanks and sorry in FriendShip and when ever you need help at any point of time just Shoot me a email. I hope you got my Email Address :)
"Opinions are neither right nor wrong. I cannot change your opinion. I can, however, change what influences your opinion." - David Crow
cheers, Alok Gupta
-
toxcct wrote: i really liked to share this with you (if you agree of course)... it would be grateful to me Thanks for offer :),I need some time to think over it if you don't mind. I amn't Intelligent as you,you know many thing which I still learning :). toxcct wrote: help me with some useful tips/suggestions... Hain no thanks and sorry in FriendShip and when ever you need help at any point of time just Shoot me a email. I hope you got my Email Address :)
"Opinions are neither right nor wrong. I cannot change your opinion. I can, however, change what influences your opinion." - David Crow
cheers, Alok Gupta
ThatsAlok wrote: I need some time to think over it if you don't mind no problem. ThatsAlok wrote: amn't Intelligent as you,you know many thing which I still learning hum, are you sure ?! ;P if i look at your birthday, you're older than me ;) ThatsAlok wrote: Hain no thanks and sorry in FriendShip hum, i'm not certain to understand 'cause my poor english doesn't "decode" this sentence... :-D anyway, thanks for you're support ;) cheers,
TOXCCT >>> GEII power
[toxcct][VisualCalc] -
ThatsAlok wrote: I need some time to think over it if you don't mind no problem. ThatsAlok wrote: amn't Intelligent as you,you know many thing which I still learning hum, are you sure ?! ;P if i look at your birthday, you're older than me ;) ThatsAlok wrote: Hain no thanks and sorry in FriendShip hum, i'm not certain to understand 'cause my poor english doesn't "decode" this sentence... :-D anyway, thanks for you're support ;) cheers,
TOXCCT >>> GEII power
[toxcct][VisualCalc]toxcct wrote: Hain no thanks and sorry in FriendShip hum, i'm not certain to understand 'cause my poor english doesn't "decode" this sentence... I want to say :- no need to be formal with me :)
"Opinions are neither right nor wrong. I cannot change your opinion. I can, however, change what influences your opinion." - David Crow
cheers, Alok Gupta
-
actually, i think it's far from being perfect... i really liked to add formal calculation into it (like
"x + x"returning"2x") i also like to add more personalization, like allowing the users to configure the number of digits they'd like to appearing as a result, etc... I also thought (one day i was dreaming too much) to adding a graphical area to draw functions (2D or 3D why not :-D ) but i saddly don't have enough time to make all these at the moment... hey, you know what ? i really liked to share this with you (if you agree of course)... it would be grateful to me if you accepted to become my co-author on that article, or at least, help me with some useful tips/suggestions... i'm waiting for your answer "hurrily" sincerly,
TOXCCT >>> GEII power
[toxcct][VisualCalc]toxcct wrote: i'm waiting for your answer "hurrily" I have a OFFER for you! Will you be my Co-Author in 45 Days Series :)
"Opinions are neither right nor wrong. I cannot change your opinion. I can, however, change what influences your opinion." - David Crow
cheers, Alok Gupta
-
toxcct wrote: i'm waiting for your answer "hurrily" I have a OFFER for you! Will you be my Co-Author in 45 Days Series :)
"Opinions are neither right nor wrong. I cannot change your opinion. I can, however, change what influences your opinion." - David Crow
cheers, Alok Gupta
ThatsAlok wrote: Will you be my Co-Author in 45 Days Series definitely yes !! :-D i never had such an opportunity, and it's an occasion so great and so funny that a say YES to your offer ! moreover, it's very advantageaous to sharing knowledges like this, and so more when it's hard to find some work (especially when many of the employers requiere to have a good english level...). ok, now, when do we start ? what's my first task captain ??? :-D
TOXCCT >>> GEII power
[toxcct][VisualCalc] -
ThatsAlok wrote: Will you be my Co-Author in 45 Days Series definitely yes !! :-D i never had such an opportunity, and it's an occasion so great and so funny that a say YES to your offer ! moreover, it's very advantageaous to sharing knowledges like this, and so more when it's hard to find some work (especially when many of the employers requiere to have a good english level...). ok, now, when do we start ? what's my first task captain ??? :-D
TOXCCT >>> GEII power
[toxcct][VisualCalc]toxcct wrote: definitely yes !! Nice :) toxcct wrote: what's my first task captain ??? I will send you first task by email, gather good question from them :) Ok!,Also a intresting comment is posted on 45 day series article page, have look over it
"Opinions are neither right nor wrong. I cannot change your opinion. I can, however, change what influences your opinion." - David Crow
cheers, Alok Gupta