Silly?!!
-
Hello A silly question.. Just for the sake of sharing funny memories. What is the most funny, silly, ridiculous programming mistake you ever made??:-D Also if anybody has nice memories from the old times -when the OS was loaded each time from a 5.25" disk-, please post it. I can't seem to remember any of mine at the moment;P, but I'll sure post anything I remember. Regards:rose:
regressing from C++ programming to C programming ( using a C compiler ):
int someFunction( )
{
/// declared some variables...
/// do something ...int iSomeResults;
/// continue doing something else.
/// ...
}it took us ( 4 person ) at least 1/2 hour to figure it out. :|
Maximilien Lincourt Your Head A Splode - Strong Bad
-
regressing from C++ programming to C programming ( using a C compiler ):
int someFunction( )
{
/// declared some variables...
/// do something ...int iSomeResults;
/// continue doing something else.
/// ...
}it took us ( 4 person ) at least 1/2 hour to figure it out. :|
Maximilien Lincourt Your Head A Splode - Strong Bad
Maximilien wrote:
it took us ( 4 person ) at least 1/2 hour to figure it out.
I actually like that fact about C. It helps enforce better variable usage and planning IMO. Most people tend to throw them around as if they are candy.
Jeremy Falcon
-
I asked a programming question in the Lounge once
OUCH!!:laugh:
-
Maximilien wrote:
it took us ( 4 person ) at least 1/2 hour to figure it out.
I actually like that fact about C. It helps enforce better variable usage and planning IMO. Most people tend to throw them around as if they are candy.
Jeremy Falcon
-
gantww wrote:
Is it something about where the variable was declared?
Programming Question!!!!! ;P But yeah, in C you have to declare in them a block before you do anything else. If you really wanted to declare something in the middle of a block just put it in brackets for a new block.
Jeremy Falcon
-
OUCH!!:laugh:
Well, the upside was, after it was fried, I was able to open up the computer and learn about hardware.
Jeremy Falcon
-
Maximilien wrote:
it took us ( 4 person ) at least 1/2 hour to figure it out.
I actually like that fact about C. It helps enforce better variable usage and planning IMO. Most people tend to throw them around as if they are candy.
Jeremy Falcon
I disagree, I think it's good form to declare variables where you're going to use them, to limit their scope.
Christian Graus - Microsoft MVP - C++ Metal Musings - Rex and my new metal blog
-
Maximilien wrote:
it took us ( 4 person ) at least 1/2 hour to figure it out.
I actually like that fact about C. It helps enforce better variable usage and planning IMO. Most people tend to throw them around as if they are candy.
Jeremy Falcon
Jeremy Falcon wrote:
Most people tend to throw them around as if they are candy.
What, like they're cheap? :rolleyes:
---- Scripts i’ve known... CPhog 1.8.2 - make CP better. Forum Bookmark 0.2.5 - bookmark forum posts on Pensieve Print forum 0.1.2 - printer-friendly forums Expand all 1.0 - Expand all messages In-place Delete 1.0 - AJAX-style post delete Syntax 0.1 - Syntax highlighting for code blocks in the forums
-
I disagree, I think it's good form to declare variables where you're going to use them, to limit their scope.
Christian Graus - Microsoft MVP - C++ Metal Musings - Rex and my new metal blog
Christian Graus wrote:
I think it's good form to declare variables where you're going to use them, to limit their scope.
Me too, and C doesn't stop you from doing that. Every block has their own scope. If you need to limit the scope of a variable then surround it in a new block. But, in my experience I've seen that declaring variables on the fly as you need them (generalizing) tends to lead to wasting them.
Jeremy Falcon
-
Jeremy Falcon wrote:
Most people tend to throw them around as if they are candy.
What, like they're cheap? :rolleyes:
---- Scripts i’ve known... CPhog 1.8.2 - make CP better. Forum Bookmark 0.2.5 - bookmark forum posts on Pensieve Print forum 0.1.2 - printer-friendly forums Expand all 1.0 - Expand all messages In-place Delete 1.0 - AJAX-style post delete Syntax 0.1 - Syntax highlighting for code blocks in the forums
Maybe I should start a Variable Financing company.
Jeremy Falcon
-
Christian Graus wrote:
I think it's good form to declare variables where you're going to use them, to limit their scope.
Me too, and C doesn't stop you from doing that. Every block has their own scope. If you need to limit the scope of a variable then surround it in a new block. But, in my experience I've seen that declaring variables on the fly as you need them (generalizing) tends to lead to wasting them.
Jeremy Falcon
Jeremy Falcon wrote:
If you need to limit the scope of a variable then surround it in a new block.
I really wish more people would do that. There are still far too many methods around that start out with a page of local variable definitions. X|
---- Scripts i’ve known... CPhog 1.8.2 - make CP better. Forum Bookmark 0.2.5 - bookmark forum posts on Pensieve Print forum 0.1.2 - printer-friendly forums Expand all 1.0 - Expand all messages In-place Delete 1.0 - AJAX-style post delete Syntax 0.1 - Syntax highlighting for code blocks in the forums
-
Jeremy Falcon wrote:
If you need to limit the scope of a variable then surround it in a new block.
I really wish more people would do that. There are still far too many methods around that start out with a page of local variable definitions. X|
---- Scripts i’ve known... CPhog 1.8.2 - make CP better. Forum Bookmark 0.2.5 - bookmark forum posts on Pensieve Print forum 0.1.2 - printer-friendly forums Expand all 1.0 - Expand all messages In-place Delete 1.0 - AJAX-style post delete Syntax 0.1 - Syntax highlighting for code blocks in the forums
Shog9 wrote:
There are still far too many methods around that start out with a page of local variable definitions.
Well, you could look at it like the table of contents for a fine novel. :-D
Jeremy Falcon
-
Hello A silly question.. Just for the sake of sharing funny memories. What is the most funny, silly, ridiculous programming mistake you ever made??:-D Also if anybody has nice memories from the old times -when the OS was loaded each time from a 5.25" disk-, please post it. I can't seem to remember any of mine at the moment;P, but I'll sure post anything I remember. Regards:rose:
I installed a floppy drive cable upside down and spent 10 minutes figuring out why it kept corrupting the disk. As for programming I tend to not make silly mistakes. Sure I have my share of simple WTF's but those I usually fix without much fanfare. I suppose my biggest and silliest mistake was my first VB6 app that I was contracted to work. It was so bad that I rewrote most of it for free even though the original satisfied the wording on the contract.
A man said to the universe: "Sir I exist!" "However," replied the Universe, "The fact has not created in me A sense of obligation." -- Stephen Crane
-
Hello A silly question.. Just for the sake of sharing funny memories. What is the most funny, silly, ridiculous programming mistake you ever made??:-D Also if anybody has nice memories from the old times -when the OS was loaded each time from a 5.25" disk-, please post it. I can't seem to remember any of mine at the moment;P, but I'll sure post anything I remember. Regards:rose:
I don't know how silly it is, but several years ago I was reviewing my "bag o' tricks", a C++ class library I'd built up over the years to cover all sorts of things. I kept coming back to a piece of code in one class that really bugged me. It seemed so badly done. There was a cryptic comment about it working, but it still bugged me. Finally, I had enough and spent a day rewriting code until I hit some stumbling blocks and simultaneously started having deja vu about what I was doing. I pressed on until it hit me; I'd tried this before and ended up in the same dead end; I'm not talking a similar dead end, but the exact same intractable problem. This time, after I rolled the code back, I put a comment block that warned me about ever trying to rewrite the code again. * * * The next one wasn't my doing, but too funny to leave out. I was running BoundsChecker on some code and getting horrible resource and memory leaks. I was stunned. Further examination found dozens of "new"s without any "delete"s all done by the same guy, who was otherwise a good developer. Then it hit me: for the previous two years he'd been doing C# programming and when he switched back to C++ he forgot there was no garbage collector. He later confirmed the same thing.
Anyone who thinks he has a better idea of what's good for people than people do is a swine. - P.J. O'Rourke
-
Hello A silly question.. Just for the sake of sharing funny memories. What is the most funny, silly, ridiculous programming mistake you ever made??:-D Also if anybody has nice memories from the old times -when the OS was loaded each time from a 5.25" disk-, please post it. I can't seem to remember any of mine at the moment;P, but I'll sure post anything I remember. Regards:rose:
Nader Elshehabi wrote:
Also if anybody has nice memories from the old times
Well, it was better than the paper tape option. I did not like the 75 minute compile times (with me swapping the floppies in the 4 drives used for scratch space.
Nader Elshehabi wrote:
ridiculous programming mistake
Well, maybe not my mistake but impacted by it. This was on an IBM 360 mainframe. Some one set a global function and called it "X". So every program that used X (and yes my error to let type just default - it was fortran) suddenly just was not behaving right. That debug map just did not make sense :)
-
Hello A silly question.. Just for the sake of sharing funny memories. What is the most funny, silly, ridiculous programming mistake you ever made??:-D Also if anybody has nice memories from the old times -when the OS was loaded each time from a 5.25" disk-, please post it. I can't seem to remember any of mine at the moment;P, but I'll sure post anything I remember. Regards:rose:
I dropped my stack of un-numbered FORTRAN punch cards...took me half a day to put them back in order.
Gary Kirkham Forever Forgiven and Alive in the Spirit He is no fool who gives what he cannot keep to gain what he cannot lose. - Jim Elliot Me blog, You read
-
I don't know how silly it is, but several years ago I was reviewing my "bag o' tricks", a C++ class library I'd built up over the years to cover all sorts of things. I kept coming back to a piece of code in one class that really bugged me. It seemed so badly done. There was a cryptic comment about it working, but it still bugged me. Finally, I had enough and spent a day rewriting code until I hit some stumbling blocks and simultaneously started having deja vu about what I was doing. I pressed on until it hit me; I'd tried this before and ended up in the same dead end; I'm not talking a similar dead end, but the exact same intractable problem. This time, after I rolled the code back, I put a comment block that warned me about ever trying to rewrite the code again. * * * The next one wasn't my doing, but too funny to leave out. I was running BoundsChecker on some code and getting horrible resource and memory leaks. I was stunned. Further examination found dozens of "new"s without any "delete"s all done by the same guy, who was otherwise a good developer. Then it hit me: for the previous two years he'd been doing C# programming and when he switched back to C++ he forgot there was no garbage collector. He later confirmed the same thing.
Anyone who thinks he has a better idea of what's good for people than people do is a swine. - P.J. O'Rourke
Joe Woodbury wrote:
I put a comment block that warned me about ever trying to rewrite the code again
yeah, i have a couple of those. "DONT TOUCH THIS! it might look like you can do XYZ but you've already tried that. just leave it alone!"
-
Hello A silly question.. Just for the sake of sharing funny memories. What is the most funny, silly, ridiculous programming mistake you ever made??:-D Also if anybody has nice memories from the old times -when the OS was loaded each time from a 5.25" disk-, please post it. I can't seem to remember any of mine at the moment;P, but I'll sure post anything I remember. Regards:rose:
not too long ago i was writing some SQL to do an Update. i got the fields and values part of the query finished, then decided to try it out. yay! :cool: i hadn't put on the "Where" part yet, of course. :omg: it wrecked every row in the table (all 13,000 of them). :((
-
I dropped my stack of un-numbered FORTRAN punch cards...took me half a day to put them back in order.
Gary Kirkham Forever Forgiven and Alive in the Spirit He is no fool who gives what he cannot keep to gain what he cannot lose. - Jim Elliot Me blog, You read
Gary Kirkham wrote:
I dropped my stack of un-numbered FORTRAN punch cards
At which time you either remembered to draw a diagonal with a felt marker. Or did number them. :) We had fun one day. Took some random cards and substituded a guys box when he was not looking (with an appolgy note for knocking them off the table. :rolleyes: )
-
I dropped my stack of un-numbered FORTRAN punch cards...took me half a day to put them back in order.
Gary Kirkham Forever Forgiven and Alive in the Spirit He is no fool who gives what he cannot keep to gain what he cannot lose. - Jim Elliot Me blog, You read
That's an uuh.. unconventional programming error. (At least in my mindset :-D)
-- Bender's humor by Microsoft Joke