The 24 day bug
-
In a time long ago we had a problem with an embedded system using a 68000 family processor. The computer would run great for 24 days without issue. However, late on the 24th day, the computer would "wig out" (technical term) causing itself to restart (a requirement for embedded systems). The customer was withholding the final $90,000 payment until this issue was fixed. The problem was found in the following code.
/* return the number of milliseconds since the computer was started. */ /* overflow from the low DWORD goes into the high DWORD giving us 64 */ /* bits of total size for the counter */ void GetUpTime (DWORD *phigh, DWORD *plow) { *phigh = xyz; // get the value from the hardware *plow = zyx; // get the value from the hardware return; } /* return the number of elapsed seconds since startup */ double GetElapsedTime () { DWORD high, low; GetUpTime (&high, &low); return ((double) high) * 4294967.296 + ((double) low) / 1000.0; }By looking at the code, I doubt anyone will see the problem. We didn't see the issue. Theorize what the problem might be and how you would test it. After a while, I'll tell you how GetElapsedTime was behaving.Tim Smith I'm going to patent thought. I have yet to see any prior art.
All I can think of is that 4294967.296 may be single rather than double, but as that may be compiler-specific I don't know. I will say though, that I'd rather you either include answer, or at least post the answer as a reply, so your audience can choose to read or not read it.
-
In a time long ago we had a problem with an embedded system using a 68000 family processor. The computer would run great for 24 days without issue. However, late on the 24th day, the computer would "wig out" (technical term) causing itself to restart (a requirement for embedded systems). The customer was withholding the final $90,000 payment until this issue was fixed. The problem was found in the following code.
/* return the number of milliseconds since the computer was started. */ /* overflow from the low DWORD goes into the high DWORD giving us 64 */ /* bits of total size for the counter */ void GetUpTime (DWORD *phigh, DWORD *plow) { *phigh = xyz; // get the value from the hardware *plow = zyx; // get the value from the hardware return; } /* return the number of elapsed seconds since startup */ double GetElapsedTime () { DWORD high, low; GetUpTime (&high, &low); return ((double) high) * 4294967.296 + ((double) low) / 1000.0; }By looking at the code, I doubt anyone will see the problem. We didn't see the issue. Theorize what the problem might be and how you would test it. After a while, I'll tell you how GetElapsedTime was behaving.Tim Smith I'm going to patent thought. I have yet to see any prior art.
0xFFFFFFFF milliseconds is 24.85 days, so my psychic powers tell me that something's not right when the high DWORD in GetUpTime() is non-zero. Could be a bug in GetUpTime() not returning the right thing in *phigh, which then causes the calculation in GetElapsedTime() to overflow a double. I messed up somewhere while typing into Calc, it's actually 0x7FFFFFFF milliseconds. I still think it's an overflow somewhere.
--Mike-- Visual C++ MVP :cool: LINKS~! Ericahist | PimpFish | CP SearchBar v3.0 | C++ Forum FAQ
-
0xFFFFFFFF milliseconds is 24.85 days, so my psychic powers tell me that something's not right when the high DWORD in GetUpTime() is non-zero. Could be a bug in GetUpTime() not returning the right thing in *phigh, which then causes the calculation in GetElapsedTime() to overflow a double. I messed up somewhere while typing into Calc, it's actually 0x7FFFFFFF milliseconds. I still think it's an overflow somewhere.
--Mike-- Visual C++ MVP :cool: LINKS~! Ericahist | PimpFish | CP SearchBar v3.0 | C++ Forum FAQ
But After a while, I'll tell you how GetElapsedTime was behaving. hints that the problem is in GetElapsedTime, not GetUpTime.
-
0xFFFFFFFF milliseconds is 24.85 days, so my psychic powers tell me that something's not right when the high DWORD in GetUpTime() is non-zero. Could be a bug in GetUpTime() not returning the right thing in *phigh, which then causes the calculation in GetElapsedTime() to overflow a double. I messed up somewhere while typing into Calc, it's actually 0x7FFFFFFF milliseconds. I still think it's an overflow somewhere.
--Mike-- Visual C++ MVP :cool: LINKS~! Ericahist | PimpFish | CP SearchBar v3.0 | C++ Forum FAQ
Michael Dunn wrote:
0xFFFFFFFF milliseconds is 24.85 days
I got 0x7FFFFFFF as being 24.86 days which led to my speculation about it being a signed/unsigned issue.
Faith is a fine invention For gentlemen who see; But microscopes are prudent In an emergency! -Emily Dickinson
-
Michael Dunn wrote:
0xFFFFFFFF milliseconds is 24.85 days
I got 0x7FFFFFFF as being 24.86 days which led to my speculation about it being a signed/unsigned issue.
Faith is a fine invention For gentlemen who see; But microscopes are prudent In an emergency! -Emily Dickinson
Nah, it's got to be that the hamsters were union.
-
Michael Dunn wrote:
0xFFFFFFFF milliseconds is 24.85 days
I got 0x7FFFFFFF as being 24.86 days which led to my speculation about it being a signed/unsigned issue.
Faith is a fine invention For gentlemen who see; But microscopes are prudent In an emergency! -Emily Dickinson
Oops, you're right. I had an off-by-a-power-of-2 bug somewhere when I was typing into Calc. :doh:
--Mike-- Visual C++ MVP :cool: LINKS~! Ericahist | PimpFish | CP SearchBar v3.0 | C++ Forum FAQ
-
In a time long ago we had a problem with an embedded system using a 68000 family processor. The computer would run great for 24 days without issue. However, late on the 24th day, the computer would "wig out" (technical term) causing itself to restart (a requirement for embedded systems). The customer was withholding the final $90,000 payment until this issue was fixed. The problem was found in the following code.
/* return the number of milliseconds since the computer was started. */ /* overflow from the low DWORD goes into the high DWORD giving us 64 */ /* bits of total size for the counter */ void GetUpTime (DWORD *phigh, DWORD *plow) { *phigh = xyz; // get the value from the hardware *plow = zyx; // get the value from the hardware return; } /* return the number of elapsed seconds since startup */ double GetElapsedTime () { DWORD high, low; GetUpTime (&high, &low); return ((double) high) * 4294967.296 + ((double) low) / 1000.0; }By looking at the code, I doubt anyone will see the problem. We didn't see the issue. Theorize what the problem might be and how you would test it. After a while, I'll tell you how GetElapsedTime was behaving.Tim Smith I'm going to patent thought. I have yet to see any prior art.
I agree with Mike Dunn. I think it has to do with an overflow. Please, don't make us wait 24 days to find out.
Dave Kreskowiak Microsoft MVP - Visual Basic
-
In a time long ago we had a problem with an embedded system using a 68000 family processor. The computer would run great for 24 days without issue. However, late on the 24th day, the computer would "wig out" (technical term) causing itself to restart (a requirement for embedded systems). The customer was withholding the final $90,000 payment until this issue was fixed. The problem was found in the following code.
/* return the number of milliseconds since the computer was started. */ /* overflow from the low DWORD goes into the high DWORD giving us 64 */ /* bits of total size for the counter */ void GetUpTime (DWORD *phigh, DWORD *plow) { *phigh = xyz; // get the value from the hardware *plow = zyx; // get the value from the hardware return; } /* return the number of elapsed seconds since startup */ double GetElapsedTime () { DWORD high, low; GetUpTime (&high, &low); return ((double) high) * 4294967.296 + ((double) low) / 1000.0; }By looking at the code, I doubt anyone will see the problem. We didn't see the issue. Theorize what the problem might be and how you would test it. After a while, I'll tell you how GetElapsedTime was behaving.Tim Smith I'm going to patent thought. I have yet to see any prior art.
IMO, high and low are DWORDS (unsigned), converting them to doubles ended up treating them as signed values. As soon as you hit 0x80000000 in high, you'd get a negative number. You wouldn't notice it in low if it went negative except for some jitter in the time elapsed. Marc
People are just notoriously impossible. --DavidCrow
There's NO excuse for not commenting your code. -- John Simmons / outlaw programmer
People who say that they will refactor their code later to make it "good" don't understand refactoring, nor the art and craft of programming. -- Josh Smith -
IMO, high and low are DWORDS (unsigned), converting them to doubles ended up treating them as signed values. As soon as you hit 0x80000000 in high, you'd get a negative number. You wouldn't notice it in low if it went negative except for some jitter in the time elapsed. Marc
People are just notoriously impossible. --DavidCrow
There's NO excuse for not commenting your code. -- John Simmons / outlaw programmer
People who say that they will refactor their code later to make it "good" don't understand refactoring, nor the art and craft of programming. -- Josh SmithMarc Clifton wrote:
IMO, high and low are DWORDS (unsigned), converting them to doubles ended up treating them as signed values.
that was also my idea, at least for a while. However, on my system, DWORD is converted to double without loosing its unsigned nature, hence, unless the Smith embedded system performs a mistake on cast our idea is wrong. :)
If the Lord God Almighty had consulted me before embarking upon the Creation, I would have recommended something simpler. -- Alfonso the Wise, 13th Century King of Castile.
-
IMO, high and low are DWORDS (unsigned), converting them to doubles ended up treating them as signed values. As soon as you hit 0x80000000 in high, you'd get a negative number. You wouldn't notice it in low if it went negative except for some jitter in the time elapsed. Marc
People are just notoriously impossible. --DavidCrow
There's NO excuse for not commenting your code. -- John Simmons / outlaw programmer
People who say that they will refactor their code later to make it "good" don't understand refactoring, nor the art and craft of programming. -- Josh SmithMarc is correct. The code is 100% correct in theory but wrong due to the 68000 not supporting unsigned integer to floating point conversion. Thus once the unsigned value hit 0x80000000, the resulting double value went negative. The fix was a simple and just avoided unsigned conversions. The only problem was that the overflow was in the low and not the high. The ticks were in milliseconds so an overflow in the high DWORD won't happen for a very very long time.
Tim Smith I'm going to patent thought. I have yet to see any prior art.
-
Marc is correct. The code is 100% correct in theory but wrong due to the 68000 not supporting unsigned integer to floating point conversion. Thus once the unsigned value hit 0x80000000, the resulting double value went negative. The fix was a simple and just avoided unsigned conversions. The only problem was that the overflow was in the low and not the high. The ticks were in milliseconds so an overflow in the high DWORD won't happen for a very very long time.
Tim Smith I'm going to patent thought. I have yet to see any prior art.
Tim Smith wrote:
Marc is correct.
Woot! :jig:
Tim Smith wrote:
The ticks were in milliseconds so an overflow in the high DWORD won't happen for a very very long time.
:doh: Of course. :sigh: Marc
People are just notoriously impossible. --DavidCrow
There's NO excuse for not commenting your code. -- John Simmons / outlaw programmer
People who say that they will refactor their code later to make it "good" don't understand refactoring, nor the art and craft of programming. -- Josh Smith -
In a time long ago we had a problem with an embedded system using a 68000 family processor. The computer would run great for 24 days without issue. However, late on the 24th day, the computer would "wig out" (technical term) causing itself to restart (a requirement for embedded systems). The customer was withholding the final $90,000 payment until this issue was fixed. The problem was found in the following code.
/* return the number of milliseconds since the computer was started. */ /* overflow from the low DWORD goes into the high DWORD giving us 64 */ /* bits of total size for the counter */ void GetUpTime (DWORD *phigh, DWORD *plow) { *phigh = xyz; // get the value from the hardware *plow = zyx; // get the value from the hardware return; } /* return the number of elapsed seconds since startup */ double GetElapsedTime () { DWORD high, low; GetUpTime (&high, &low); return ((double) high) * 4294967.296 + ((double) low) / 1000.0; }By looking at the code, I doubt anyone will see the problem. We didn't see the issue. Theorize what the problem might be and how you would test it. After a while, I'll tell you how GetElapsedTime was behaving.Tim Smith I'm going to patent thought. I have yet to see any prior art.
-
Divsion by zero. Operator precedence. [edit]Just read your reply to Marc - still think I found something, though.[/edit] [edit2] Oops! :-O I guess it's called Division by zero for a reason! [/edit2] Mike
Mike_V wrote:
Oops! I guess it's called Division by zero for a reason
It's called Nullity.
the last thing I want to see is some pasty-faced geek with skin so pale that it's almost translucent trying to bump parts with a partner - John Simmons / outlaw programmer
Deja View - the feeling that you've seen this post before. -
Tim Smith wrote:
Marc is correct.
Woot! :jig:
Tim Smith wrote:
The ticks were in milliseconds so an overflow in the high DWORD won't happen for a very very long time.
:doh: Of course. :sigh: Marc
People are just notoriously impossible. --DavidCrow
There's NO excuse for not commenting your code. -- John Simmons / outlaw programmer
People who say that they will refactor their code later to make it "good" don't understand refactoring, nor the art and craft of programming. -- Josh Smithyou just should have stopped reading earlier ;)
Developers, Developers, Developers, Developers, Developers, Developers, Velopers, Develprs, Developers!
We are a big screwed up dysfunctional psychotic happy family - some more screwed up, others more happy, but everybody's psychotic joint venture definition of CP
Linkify!|Fold With Us! -
you just should have stopped reading earlier ;)
Developers, Developers, Developers, Developers, Developers, Developers, Velopers, Develprs, Developers!
We are a big screwed up dysfunctional psychotic happy family - some more screwed up, others more happy, but everybody's psychotic joint venture definition of CP
Linkify!|Fold With Us!peterchen wrote:
you just should have stopped reading earlier
I should have stopped writing sooner! :) Marc
People are just notoriously impossible. --DavidCrow
There's NO excuse for not commenting your code. -- John Simmons / outlaw programmer
People who say that they will refactor their code later to make it "good" don't understand refactoring, nor the art and craft of programming. -- Josh Smith -
In a time long ago we had a problem with an embedded system using a 68000 family processor. The computer would run great for 24 days without issue. However, late on the 24th day, the computer would "wig out" (technical term) causing itself to restart (a requirement for embedded systems). The customer was withholding the final $90,000 payment until this issue was fixed. The problem was found in the following code.
/* return the number of milliseconds since the computer was started. */ /* overflow from the low DWORD goes into the high DWORD giving us 64 */ /* bits of total size for the counter */ void GetUpTime (DWORD *phigh, DWORD *plow) { *phigh = xyz; // get the value from the hardware *plow = zyx; // get the value from the hardware return; } /* return the number of elapsed seconds since startup */ double GetElapsedTime () { DWORD high, low; GetUpTime (&high, &low); return ((double) high) * 4294967.296 + ((double) low) / 1000.0; }By looking at the code, I doubt anyone will see the problem. We didn't see the issue. Theorize what the problem might be and how you would test it. After a while, I'll tell you how GetElapsedTime was behaving.Tim Smith I'm going to patent thought. I have yet to see any prior art.
The 24 day hint was the clue for me. 3 to 4 minutes to the correct solution. And I found another VERY rare bug. Bug found by finding the number of milliseconds in 24 days. This was about half of 2^32. Thus DWORD had to be signed which produced a negative number after 0x7FFFFFFF milliseconds. The second bug is in your GetUpTime() function. About every 48 days the low counter overflows into the high word. If you catch the high word before the overflow and the low word just after the overflow you will have a problem. Fix: read the high word a second time. If unchanged you are done otherwise loop back and read both again. The second time the high word will match. (If counters take much processing to read then range check the low word. If (unsigned) less than 1000 – one second – then check the high word again. Otherwise it should be safe to skip the high word check.) The method given above works well in 8-bit microcontrollers for reading 16-bit counters on the fly without requiring h/w interlocks.
