[Message Deleted] [modified]
-
Pallab_GT wrote:
Tell me will it be something new if i can prove what i am claiming?
Do you need my approval?
If the Lord God Almighty had consulted me before embarking upon the Creation, I would have recommended something simpler. -- Alfonso the Wise, 13th Century King of Castile.
This is going on my arrogant assumptions. You may have a superb reason why I'm completely wrong. -- Iain Clarke -
Pallab_GT wrote:
Tell me will it be something new if i can prove what i am claiming?
Do you need my approval?
If the Lord God Almighty had consulted me before embarking upon the Creation, I would have recommended something simpler. -- Alfonso the Wise, 13th Century King of Castile.
This is going on my arrogant assumptions. You may have a superb reason why I'm completely wrong. -- Iain Clarke -
Pallab_GT wrote:
Can you plse tell me will it be something new if i can do what i am claiming to do?
Not only will it be new, it will be a miracle :rolleyes: Haven't you learned anything from this discussion? You want to hide data in a text file without making noticeable changes. I have demonstrated to you that any change you make to the file is noticeable. Therefore your objective is impossible.
Paul Marfleet "No, his mind is not for rent To any God or government" Tom Sawyer - Rush
Well Sir,if you comapare the text files(prior and post hiding data versions) bit by bit...there will be obviously some chages.But that change will have no impact whatsoever in any of the readable/printable letters of the file.Not even a single readable/printable letter will be changed/replaced or distorted.Plse note my emphasise on readable/printable letters.There will be some changes in the file in binary level.But,i say again that change in binary level will have no impact whatsoever in the readable/printable letters of the text file,the readable/printable letters will remain absolutely the same as they were before hiding the data.And the size of the file will also remain absolutely unchanged.The size will not change even by a single byte. Will you still consider it a miracle?
-
Well Sir,if you comapare the text files(prior and post hiding data versions) bit by bit...there will be obviously some chages.But that change will have no impact whatsoever in any of the readable/printable letters of the file.Not even a single readable/printable letter will be changed/replaced or distorted.Plse note my emphasise on readable/printable letters.There will be some changes in the file in binary level.But,i say again that change in binary level will have no impact whatsoever in the readable/printable letters of the text file,the readable/printable letters will remain absolutely the same as they were before hiding the data.And the size of the file will also remain absolutely unchanged.The size will not change even by a single byte. Will you still consider it a miracle?
-
Ok, to make a long story short: I think, it's impossible. I think, all necessary was said by parmfleet. I think, it's a miracle (I don't believe in algorithm miracles). In this sense, yes it's new. Matthias
Well Sir,if you comapare the text files(prior and post hiding data versions) bit by bit...there will be obviously some chages.But that change will have no impact whatsoever in any of the readable/printable letters of the file.Not even a single readable/printable letter will be changed/replaced or distorted.Plse note my emphasise on readable/printable letters.There will be some changes in the file in binary level.But,i say again that change in binary level will have no impact whatsoever in the readable/printable letters of the text file,the readable/printable letters will remain absolutely the same as they were before hiding the data.And the size of the file will also remain absolutely unchanged.The size will not change even by a single byte. Considering the above...do u really think it's impossible?
-
Why don't you just tell that this would be indeed a first application and algorithm that would be capable of data hiding in the way he claims it to do?
codito ergo sum
Well Sir,if you comapare the text files(prior and post hiding data versions) bit by bit...there will be obviously some chages.But that change will have no impact whatsoever in any of the readable/printable letters of the file.Not even a single readable/printable letter will be changed/replaced or distorted.Plse note my emphasise on readable/printable letters.There will be some changes in the file in binary level.But,i say again that change in binary level will have no impact whatsoever in the readable/printable letters of the text file,the readable/printable letters will remain absolutely the same as they were before hiding the data.And the size of the file will also remain absolutely unchanged.The size will not change even by a single byte. Considering the above...do u still think its impossible? Sir,does it really matter if somebody tells me something because of my persistance?The question is if i can honour what i am saying? I know very little about software development and i sincerely consider you people far more learned than me.That why i am just asking u people if this techniq has already been implemented the way i am claiming it.
-
What do yo mean with. The file will change on a binary level.? And how wouldn't that have an impact on the readable Text portion of the file?
codito ergo sum
-
Well Sir,if you comapare the text files(prior and post hiding data versions) bit by bit...there will be obviously some chages.But that change will have no impact whatsoever in any of the readable/printable letters of the file.Not even a single readable/printable letter will be changed/replaced or distorted.Plse note my emphasise on readable/printable letters.There will be some changes in the file in binary level.But,i say again that change in binary level will have no impact whatsoever in the readable/printable letters of the text file,the readable/printable letters will remain absolutely the same as they were before hiding the data.And the size of the file will also remain absolutely unchanged.The size will not change even by a single byte. Considering the above...do u still think its impossible? Sir,does it really matter if somebody tells me something because of my persistance?The question is if i can honour what i am saying? I know very little about software development and i sincerely consider you people far more learned than me.That why i am just asking u people if this techniq has already been implemented the way i am claiming it.
-
Well Sir,if you comapare the text files(prior and post hiding data versions) bit by bit...there will be obviously some chages.But that change will have no impact whatsoever in any of the readable/printable letters of the file.Not even a single readable/printable letter will be changed/replaced or distorted.Plse note my emphasise on readable/printable letters.There will be some changes in the file in binary level.But,i say again that change in binary level will have no impact whatsoever in the readable/printable letters of the text file,the readable/printable letters will remain absolutely the same as they were before hiding the data.And the size of the file will also remain absolutely unchanged.The size will not change even by a single byte. Considering the above...do u really think it's impossible?
Ok, so you change the text file at bit-level, of cource you can use this to "hide data". But consinder, text files are interpreted by editors (programs). Any editor may / may not react to your changes, and EVERY hex-editor / binary compare tool will notice the differences. So the changes are not hidden, and the whole secret is based on your algorithm (of coding your data into bit-changes). Therefore it's not a secret at all. Matthias
-
Why don't you just tell that this would be indeed a first application and algorithm that would be capable of data hiding in the way he claims it to do?
codito ergo sum
So, do you think he needs my approval?
If the Lord God Almighty had consulted me before embarking upon the Creation, I would have recommended something simpler. -- Alfonso the Wise, 13th Century King of Castile.
This is going on my arrogant assumptions. You may have a superb reason why I'm completely wrong. -- Iain Clarke -
Well Sir,if you comapare the text files(prior and post hiding data versions) bit by bit...there will be obviously some chages.But that change will have no impact whatsoever in any of the readable/printable letters of the file.Not even a single readable/printable letter will be changed/replaced or distorted.Plse note my emphasise on readable/printable letters.There will be some changes in the file in binary level.But,i say again that change in binary level will have no impact whatsoever in the readable/printable letters of the text file,the readable/printable letters will remain absolutely the same as they were before hiding the data.And the size of the file will also remain absolutely unchanged.The size will not change even by a single byte. Considering the above...do u still think its impossible? Sir,does it really matter if somebody tells me something because of my persistance?The question is if i can honour what i am saying? I know very little about software development and i sincerely consider you people far more learned than me.That why i am just asking u people if this techniq has already been implemented the way i am claiming it.
I think we're beating a dead horse. The purpose of this thread is becoming a useless increasing of the poor Mathematics and Algorithms forum. I don't bother if your technique is new or old. I'm just wondering if your algo is able to accomplish the task (the way you claimed) or not. Now, IMHO there are the following alternatives:
(1) You want to keep your algo secret.And you don't want to give any
evidence of its results.
(2) You want to keep your algo secret, But you want to give some evidence
of the results.
(3) You don't want to keep it secret.Under (1) hypothesys, we should stop to beat the horse. Under (2) one, you can provide us a text file with hidden info inside and the original file (without the hidden info inside). Under (3) hypothesys, you may tell us about you prodigious algo or even write an article on the argument. BTW I can't give you a prize for the innovative idea, It is not my role. :)
If the Lord God Almighty had consulted me before embarking upon the Creation, I would have recommended something simpler. -- Alfonso the Wise, 13th Century King of Castile.
This is going on my arrogant assumptions. You may have a superb reason why I'm completely wrong. -- Iain Clarke -
Ok, so you change the text file at bit-level, of cource you can use this to "hide data". But consinder, text files are interpreted by editors (programs). Any editor may / may not react to your changes, and EVERY hex-editor / binary compare tool will notice the differences. So the changes are not hidden, and the whole secret is based on your algorithm (of coding your data into bit-changes). Therefore it's not a secret at all. Matthias
Ya Every hex-editor / binary compare tool will notice the difference but my point is...I have tried some data hiding softwares.Those softwares encrypt the data using any available algorithm and hide the encrypted data in a file.But in all the cases...i have observed that...using only any text editor you will be able to notice the difference.In all the cases the size of the file changes and either the encrypted data is appended in the file or some readable/printable letter of the file is replaced/changed or distorted to hide the encrypted data.But my technic does not change the size of the file,does not append the data or change/replace/distort any of the printable/readable character of the carrier file.You wont notice any change whatsoever in the file content using any text editor.
-
Ya Every hex-editor / binary compare tool will notice the difference but my point is...I have tried some data hiding softwares.Those softwares encrypt the data using any available algorithm and hide the encrypted data in a file.But in all the cases...i have observed that...using only any text editor you will be able to notice the difference.In all the cases the size of the file changes and either the encrypted data is appended in the file or some readable/printable letter of the file is replaced/changed or distorted to hide the encrypted data.But my technic does not change the size of the file,does not append the data or change/replace/distort any of the printable/readable character of the carrier file.You wont notice any change whatsoever in the file content using any text editor.
-
I think we're beating a dead horse. The purpose of this thread is becoming a useless increasing of the poor Mathematics and Algorithms forum. I don't bother if your technique is new or old. I'm just wondering if your algo is able to accomplish the task (the way you claimed) or not. Now, IMHO there are the following alternatives:
(1) You want to keep your algo secret.And you don't want to give any
evidence of its results.
(2) You want to keep your algo secret, But you want to give some evidence
of the results.
(3) You don't want to keep it secret.Under (1) hypothesys, we should stop to beat the horse. Under (2) one, you can provide us a text file with hidden info inside and the original file (without the hidden info inside). Under (3) hypothesys, you may tell us about you prodigious algo or even write an article on the argument. BTW I can't give you a prize for the innovative idea, It is not my role. :)
If the Lord God Almighty had consulted me before embarking upon the Creation, I would have recommended something simpler. -- Alfonso the Wise, 13th Century King of Castile.
This is going on my arrogant assumptions. You may have a superb reason why I'm completely wrong. -- Iain ClarkeWell Sir,I will take the second option.But You wont be able to notice any difference whatsoever between the files using any text editor(I have used MS-WORD,WORDPAD,NOTEPAD). My point is...the softwares that are avaiable to hide data in a carrier file...they change the file size,and the changes are visible using any simple text editor.But in my technic...u wont notice any change whatsoever using any text editor.
-
Well Sir,I will take the second option.But You wont be able to notice any difference whatsoever between the files using any text editor(I have used MS-WORD,WORDPAD,NOTEPAD). My point is...the softwares that are avaiable to hide data in a carrier file...they change the file size,and the changes are visible using any simple text editor.But in my technic...u wont notice any change whatsoever using any text editor.
OK. Now, where are the two files?
If the Lord God Almighty had consulted me before embarking upon the Creation, I would have recommended something simpler. -- Alfonso the Wise, 13th Century King of Castile.
This is going on my arrogant assumptions. You may have a superb reason why I'm completely wrong. -- Iain Clarke -
Pallab_GT wrote:
You wont notice any change whatsoever in the file content using any text editor.
That's the whole point. I don't believe that. How many different text-editors have you tried? Whats the text-encoding of your files? Matthias
I have used MS-WORD,WORDPAD and NOTEPAD with UTF-8 encoding. Can you refer me some other text editor and other encoding using which you can be proved right and where i can download them? Look I am just a novice in comparison with you people.I am knocking ur door just to be sure,what i think is right or wrong ?
-
OK. Now, where are the two files?
If the Lord God Almighty had consulted me before embarking upon the Creation, I would have recommended something simpler. -- Alfonso the Wise, 13th Century King of Castile.
This is going on my arrogant assumptions. You may have a superb reason why I'm completely wrong. -- Iain ClarkeYou have beared with me so long...plse bear with me a little more and give me a day plse. Sir onemore thing...if u cant notice any change in any of the readable/printable change using MS-WORD/WORDPAD/NOTEPAD using UTF-8 encoding,do u think the change can be noticed using other editor.If so can u plse refer me some text editor and where can i download them?If i am wrong i will sincerely beg ur apology to waste ur valuable time. Sir,I am a novice in compared to you n software development.I am just knocking ur door just to be sure if i am right.I dont have any other intention whatsoever.
-
You have beared with me so long...plse bear with me a little more and give me a day plse. Sir onemore thing...if u cant notice any change in any of the readable/printable change using MS-WORD/WORDPAD/NOTEPAD using UTF-8 encoding,do u think the change can be noticed using other editor.If so can u plse refer me some text editor and where can i download them?If i am wrong i will sincerely beg ur apology to waste ur valuable time. Sir,I am a novice in compared to you n software development.I am just knocking ur door just to be sure if i am right.I dont have any other intention whatsoever.
Pallab_GT wrote:
You have beared with me so long...plse bear with me a little more and give me a day plse.
Take you time. I'll be waiting for.
Pallab_GT wrote:
Sir onemore thing...if u cant notice any change in any of the readable/printable change using MS-WORD/WORDPAD/NOTEPAD using UTF-8 encoding,do u think the change can be noticed using other editor.If so can u plse refer me some text editor and where can i download them?If i am wrong i will sincerely beg ur apology to waste ur valuable time. Sir,I am a novice in compared to you n software development.I am just knocking ur door just to be sure if i am right.I dont have any other intention whatsoever.
Don't worry, you will receive all my comments and suggestions. Good luck and have a nice day.
If the Lord God Almighty had consulted me before embarking upon the Creation, I would have recommended something simpler. -- Alfonso the Wise, 13th Century King of Castile.
This is going on my arrogant assumptions. You may have a superb reason why I'm completely wrong. -- Iain Clarke -
I have used MS-WORD,WORDPAD and NOTEPAD with UTF-8 encoding. Can you refer me some other text editor and other encoding using which you can be proved right and where i can download them? Look I am just a novice in comparison with you people.I am knocking ur door just to be sure,what i think is right or wrong ?
Pallab_GT wrote:
Can you refer me some other text editor
See this thread[^] [edit] link corrected [/edit]
Pallab_GT wrote:
Can you refer me some other text encoding
ASCII
Pallab_GT wrote:
I have used UTF-8 encoding
In UTF8 you could have coded space (0x20) into hard space (0xA0), would give you 1 bit for hidden data per space in carrier file (assuming the original file don't have hard spaces). There are many more possibilities. Thats all nice, but not really new. Matthias
-
Pallab_GT wrote:
You have beared with me so long...plse bear with me a little more and give me a day plse.
Take you time. I'll be waiting for.
Pallab_GT wrote:
Sir onemore thing...if u cant notice any change in any of the readable/printable change using MS-WORD/WORDPAD/NOTEPAD using UTF-8 encoding,do u think the change can be noticed using other editor.If so can u plse refer me some text editor and where can i download them?If i am wrong i will sincerely beg ur apology to waste ur valuable time. Sir,I am a novice in compared to you n software development.I am just knocking ur door just to be sure if i am right.I dont have any other intention whatsoever.
Don't worry, you will receive all my comments and suggestions. Good luck and have a nice day.
If the Lord God Almighty had consulted me before embarking upon the Creation, I would have recommended something simpler. -- Alfonso the Wise, 13th Century King of Castile.
This is going on my arrogant assumptions. You may have a superb reason why I'm completely wrong. -- Iain Clarke