1 GIG, Correct size [modified]
-
1 Gigabyte represented by most HD vendors = 1000 Megabytes whereas 1 Gigabyte represented in actual data storage is 1024 Megabytes
You are correct. Too early in the morning for my mind to work well.
John
-
Your question does not make a lot of sense to me. I mean 1024 x 1024 x 1024 but that is too small for any operating system I know (even window less linux). [EDIT]On top of that you should be able to specify MB or GB in your partitioning program. Maybe I am wrong on that. I use linux fdisk mostly and have not done this in windows in a long time. Well except at setup but that is in MB.[/EDIT]
John
modified on Friday, February 6, 2009 9:11 AM
John M. Drescher wrote:
Your question does not make a lot of sense to me.
His questions don't make any sense, actually.
You see, wire telegraph is a kind of a very, very long cat. You pull his tail in New York and his head is meowing in Los Angeles. And radio operates exactly the same way: you send signals here, they receive them there. The only difference is that there is no cat. - Albert Einstein
modified on Friday, February 6, 2009 9:03 AM
-
What is the correct size of 1 gig? I want to repartition a hard-drive for 3 operating systems. I need to know the correct size so I can multiply it by the amount for each partition. The correct size of my drive is 298 gig(320 manufacturer size). I want to partition it into 3 somewhat equal sizes. Using FDISK, When it asks you to designate the amount of space for a partition, how do you do this? What do you enter?, 1024 * (1/3 of the hard drive space) or (100 GB)Or is it (1,073,741,824,000)?
rspercy 1 + 1 = 186,440....Depending on the species.
modified on Friday, February 6, 2009 10:29 AM
-
1024 to the power 3 I'll leave the rest to you. Multiply is the asterisk key and divide is the / key when using Calculator. Good luck.
My new favourite phrase - "misdirected leisure activity"
ooooooooooooooooooo harsh! :cool:
"mostly watching the human race is like watching dogs watch tv ... they see the pictures move but the meaning escapes them"
-
Your question does not make a lot of sense to me. I mean 1024 x 1024 x 1024 but that is too small for any operating system I know (even window less linux). [EDIT]On top of that you should be able to specify MB or GB in your partitioning program. Maybe I am wrong on that. I use linux fdisk mostly and have not done this in windows in a long time. Well except at setup but that is in MB.[/EDIT]
John
modified on Friday, February 6, 2009 9:11 AM
ummmm actually 1Gb is plenty of room for almost any linux based OS to install on ;)
"mostly watching the human race is like watching dogs watch tv ... they see the pictures move but the meaning escapes them"
-
What is the correct size of 1 gig? I want to repartition a hard-drive for 3 operating systems. I need to know the correct size so I can multiply it by the amount for each partition. The correct size of my drive is 298 gig(320 manufacturer size). I want to partition it into 3 somewhat equal sizes. Using FDISK, When it asks you to designate the amount of space for a partition, how do you do this? What do you enter?, 1024 * (1/3 of the hard drive space) or (100 GB)Or is it (1,073,741,824,000)?
rspercy 1 + 1 = 186,440....Depending on the species.
modified on Friday, February 6, 2009 10:29 AM
-
ummmm actually 1Gb is plenty of room for almost any linux based OS to install on ;)
"mostly watching the human race is like watching dogs watch tv ... they see the pictures move but the meaning escapes them"
I know that live cds work in that small of a footprint but even my VPS containers are 1 to 3 GB so I generally allocate 5GB as a min
jmd0 200 # du -hs /vz/private/200
2.6G /vz/private/200jmd0 200 # du -hs /vz/private/205
1.3G /vz/private/205[EDIT]
jmd0 200 # vzlist
CTID NPROC STATUS IP_ADDR HOSTNAME
200 31 running 192.168.1.240 vs_svn
205 9 running 192.168.1.50 vs_mail200 is a subversion server and 205 is a postfix mail server. [/EDIT]
John
-
ummmm actually 1Gb is plenty of room for almost any linux based OS to install on ;)
"mostly watching the human race is like watching dogs watch tv ... they see the pictures move but the meaning escapes them"
I used to make my own Linux builds taking about 25MB, had X11 (vesa mode), busybox, a kernel, and DotGNU. It could boot into text mode with 16MB RAM. Needed 48MB RAM to run X. Sniff, the good old days :((
xacc.ide - now with TabsToSpaces support
IronScheme - 1.0 beta 2 - out now!
((lambda (x) `((lambda (x) ,x) ',x)) '`((lambda (x) ,x) ',x)) -
rspercy58 wrote:
1 + 1 = 186,440....Depending on the species.
(reading tht) it wud be difficult to give an answer
rspercy58 wrote:
multiply it
wouldn't u need to divide the CORRECT size instead of multiply?
-
I used to make my own Linux builds taking about 25MB, had X11 (vesa mode), busybox, a kernel, and DotGNU. It could boot into text mode with 16MB RAM. Needed 48MB RAM to run X. Sniff, the good old days :((
xacc.ide - now with TabsToSpaces support
IronScheme - 1.0 beta 2 - out now!
((lambda (x) `((lambda (x) ,x) ',x)) '`((lambda (x) ,x) ',x))16MB? Pah! My phone couldn't run on that these days :D
Bar fomos edo pariyart gedeem, agreo eo dranem abal edyero eyrem kalm kareore
-
ABitSmart wrote:
wouldn't u need to divide the CORRECT size instead of multiply?
Not if he started at bytes and worked his way up :doh:
-
What is the correct size of 1 gig? I want to repartition a hard-drive for 3 operating systems. I need to know the correct size so I can multiply it by the amount for each partition. The correct size of my drive is 298 gig(320 manufacturer size). I want to partition it into 3 somewhat equal sizes. Using FDISK, When it asks you to designate the amount of space for a partition, how do you do this? What do you enter?, 1024 * (1/3 of the hard drive space) or (100 GB)Or is it (1,073,741,824,000)?
rspercy 1 + 1 = 186,440....Depending on the species.
modified on Friday, February 6, 2009 10:29 AM
-
What is the correct size of 1 gig? I want to repartition a hard-drive for 3 operating systems. I need to know the correct size so I can multiply it by the amount for each partition. The correct size of my drive is 298 gig(320 manufacturer size). I want to partition it into 3 somewhat equal sizes. Using FDISK, When it asks you to designate the amount of space for a partition, how do you do this? What do you enter?, 1024 * (1/3 of the hard drive space) or (100 GB)Or is it (1,073,741,824,000)?
rspercy 1 + 1 = 186,440....Depending on the species.
modified on Friday, February 6, 2009 10:29 AM
'Base 10' gigabyte (the one hard drive manufacturers use) = 1000 x 1000 x 1000 'Base 2' gigabyte (the one Windows shows you) = 1024 x 1024 x 1024
-
'Base 10' gigabyte (the one hard drive manufacturers use) = 1000 x 1000 x 1000 'Base 2' gigabyte (the one Windows shows you) = 1024 x 1024 x 1024
Stuart Dootson wrote:
'Base 10' gigabyte (the one hard drive manufacturers use) = 1000 x 1000 x 1000
They do although that definition is not exact since sectors are 512 bytes not 500.
John