Okay, I'm at a complete loss...
-
I'm trying to set my system at home (XP64) up to allow remote connections. Here's my setup: - DSL with static IPs - Router configured as DHCP server, and IP's are assigned according to MAC address (so the same computer always gets the same internal IP) - NAT is turned on, assigning specific external IPs to associated LAN boxes The things I've done: - Remote Connection is configured to use a specific port (I changed the registry to set this port value, and I've verified after a reboot that the desired port is still specified). - Router firewall is configured to forward all TCP/IP traffic on the specified port to the desired LAN box. - Allow remote connections is turned on. - The desired user accounts have been added to the list of accounts that are allowed to remote in. When I try to connect from work (using Vista64, and typing the IP:port), I get the message: This computer can't connect to the remote computer If I try the same thing on one of my computers at home (a XP-32 laptop), it works fine (and yes, it's going out of the router and back in because it has a different IP address). The systems folks here at work say they're not blocking any outbound traffic, so that leads me to believe that I have a configuration problem somewhere. What have I missed?
"Why don't you tie a kerosene-soaked rag around your ankles so the ants won't climb up and eat your candy ass..." - Dale Earnhardt, 1997
-----
"...the staggering layers of obscenity in your statement make it a work of art on so many levels." - Jason Jystad, 10/26/2001Did you try something simple? Like telnet-ing into your home box from work or any other way to access it?
Work @ Network integrated solutions | Flickr | A practical use of the MVC pattern citizen 340340
-
I'm trying to set my system at home (XP64) up to allow remote connections. Here's my setup: - DSL with static IPs - Router configured as DHCP server, and IP's are assigned according to MAC address (so the same computer always gets the same internal IP) - NAT is turned on, assigning specific external IPs to associated LAN boxes The things I've done: - Remote Connection is configured to use a specific port (I changed the registry to set this port value, and I've verified after a reboot that the desired port is still specified). - Router firewall is configured to forward all TCP/IP traffic on the specified port to the desired LAN box. - Allow remote connections is turned on. - The desired user accounts have been added to the list of accounts that are allowed to remote in. When I try to connect from work (using Vista64, and typing the IP:port), I get the message: This computer can't connect to the remote computer If I try the same thing on one of my computers at home (a XP-32 laptop), it works fine (and yes, it's going out of the router and back in because it has a different IP address). The systems folks here at work say they're not blocking any outbound traffic, so that leads me to believe that I have a configuration problem somewhere. What have I missed?
"Why don't you tie a kerosene-soaked rag around your ankles so the ants won't climb up and eat your candy ass..." - Dale Earnhardt, 1997
-----
"...the staggering layers of obscenity in your statement make it a work of art on so many levels." - Jason Jystad, 10/26/2001Your ISP could be blocking the traffic.
Need custom software developed? I do C# development and consulting all over the United States.
If you don't ask questions the answers won't stand in your way.
Doing a job is like selecting a mule, you can't choose just the front half xor the back half so when you ask me to do a job don't expect me to do it half-assed. -
I'm trying to set my system at home (XP64) up to allow remote connections. Here's my setup: - DSL with static IPs - Router configured as DHCP server, and IP's are assigned according to MAC address (so the same computer always gets the same internal IP) - NAT is turned on, assigning specific external IPs to associated LAN boxes The things I've done: - Remote Connection is configured to use a specific port (I changed the registry to set this port value, and I've verified after a reboot that the desired port is still specified). - Router firewall is configured to forward all TCP/IP traffic on the specified port to the desired LAN box. - Allow remote connections is turned on. - The desired user accounts have been added to the list of accounts that are allowed to remote in. When I try to connect from work (using Vista64, and typing the IP:port), I get the message: This computer can't connect to the remote computer If I try the same thing on one of my computers at home (a XP-32 laptop), it works fine (and yes, it's going out of the router and back in because it has a different IP address). The systems folks here at work say they're not blocking any outbound traffic, so that leads me to believe that I have a configuration problem somewhere. What have I missed?
"Why don't you tie a kerosene-soaked rag around your ankles so the ants won't climb up and eat your candy ass..." - Dale Earnhardt, 1997
-----
"...the staggering layers of obscenity in your statement make it a work of art on so many levels." - Jason Jystad, 10/26/2001Is firewall enabled on Vista machine? Maybe it is blocking outbound connection at specified port.
-
I'm trying to set my system at home (XP64) up to allow remote connections. Here's my setup: - DSL with static IPs - Router configured as DHCP server, and IP's are assigned according to MAC address (so the same computer always gets the same internal IP) - NAT is turned on, assigning specific external IPs to associated LAN boxes The things I've done: - Remote Connection is configured to use a specific port (I changed the registry to set this port value, and I've verified after a reboot that the desired port is still specified). - Router firewall is configured to forward all TCP/IP traffic on the specified port to the desired LAN box. - Allow remote connections is turned on. - The desired user accounts have been added to the list of accounts that are allowed to remote in. When I try to connect from work (using Vista64, and typing the IP:port), I get the message: This computer can't connect to the remote computer If I try the same thing on one of my computers at home (a XP-32 laptop), it works fine (and yes, it's going out of the router and back in because it has a different IP address). The systems folks here at work say they're not blocking any outbound traffic, so that leads me to believe that I have a configuration problem somewhere. What have I missed?
"Why don't you tie a kerosene-soaked rag around your ankles so the ants won't climb up and eat your candy ass..." - Dale Earnhardt, 1997
-----
"...the staggering layers of obscenity in your statement make it a work of art on so many levels." - Jason Jystad, 10/26/2001John Simmons / outlaw programmer wrote:
and yes, it's going out of the router and back in because it has a different IP address
Are you sure of that? The only reason I am asking is because the router knows its own external IP address so there is a chance that it is optimising the connection request from another internal device on the same subnet as the destination of the port forwarding and just looping the two together internally making you think that the router is allowing the traffic out and then back in. Just to be sure I would grab your xp32 machine and run a test using a connection that is 100% outside your internal network. Run down to the local Starbucks and borrow the WiFi to see if you can get in that way.
-
Is firewall enabled on Vista machine? Maybe it is blocking outbound connection at specified port.
Windows Firewall is not running on any of the fore-mentioned boxes.
"Why don't you tie a kerosene-soaked rag around your ankles so the ants won't climb up and eat your candy ass..." - Dale Earnhardt, 1997
-----
"...the staggering layers of obscenity in your statement make it a work of art on so many levels." - Jason Jystad, 10/26/2001 -
Your ISP could be blocking the traffic.
Need custom software developed? I do C# development and consulting all over the United States.
If you don't ask questions the answers won't stand in your way.
Doing a job is like selecting a mule, you can't choose just the front half xor the back half so when you ask me to do a job don't expect me to do it half-assed.Well, it's a non-standard port, so I would think that they couldn't/wouldn't block it.
"Why don't you tie a kerosene-soaked rag around your ankles so the ants won't climb up and eat your candy ass..." - Dale Earnhardt, 1997
-----
"...the staggering layers of obscenity in your statement make it a work of art on so many levels." - Jason Jystad, 10/26/2001 -
Did you try something simple? Like telnet-ing into your home box from work or any other way to access it?
Work @ Network integrated solutions | Flickr | A practical use of the MVC pattern citizen 340340
Don't I need a telnet server running on the remote box?
"Why don't you tie a kerosene-soaked rag around your ankles so the ants won't climb up and eat your candy ass..." - Dale Earnhardt, 1997
-----
"...the staggering layers of obscenity in your statement make it a work of art on so many levels." - Jason Jystad, 10/26/2001 -
Well, it's a non-standard port, so I would think that they couldn't/wouldn't block it.
"Why don't you tie a kerosene-soaked rag around your ankles so the ants won't climb up and eat your candy ass..." - Dale Earnhardt, 1997
-----
"...the staggering layers of obscenity in your statement make it a work of art on so many levels." - Jason Jystad, 10/26/2001Go to your neighbors house. It will be easier to troubleshoot running across the street rather than downtown. Bring a six-pack and they will say yes.
Need custom software developed? I do C# development and consulting all over the United States.
If you don't ask questions the answers won't stand in your way.
Doing a job is like selecting a mule, you can't choose just the front half xor the back half so when you ask me to do a job don't expect me to do it half-assed. -
Don't I need a telnet server running on the remote box?
"Why don't you tie a kerosene-soaked rag around your ankles so the ants won't climb up and eat your candy ass..." - Dale Earnhardt, 1997
-----
"...the staggering layers of obscenity in your statement make it a work of art on so many levels." - Jason Jystad, 10/26/2001Yes you do. I was just suggesting that you should try to connect to any other open port on your box. Somehow you should isolate your problem.
Work @ Network integrated solutions | Flickr | A practical use of the MVC pattern citizen 340340
-
John Simmons / outlaw programmer wrote:
and yes, it's going out of the router and back in because it has a different IP address
Are you sure of that? The only reason I am asking is because the router knows its own external IP address so there is a chance that it is optimising the connection request from another internal device on the same subnet as the destination of the port forwarding and just looping the two together internally making you think that the router is allowing the traffic out and then back in. Just to be sure I would grab your xp32 machine and run a test using a connection that is 100% outside your internal network. Run down to the local Starbucks and borrow the WiFi to see if you can get in that way.
Ray Cassick wrote:
The only reason I am asking is because the router knows its own external IP address so there is a chance that it is optimising the connection request from another internal device on the same subnet as the destination of the port forwarding and just looping the two together internally making you think that the router is allowing the traffic out and then back in.
I suppose that could be happening, but I'm not sure how to find out if that's the case...
"Why don't you tie a kerosene-soaked rag around your ankles so the ants won't climb up and eat your candy ass..." - Dale Earnhardt, 1997
-----
"...the staggering layers of obscenity in your statement make it a work of art on so many levels." - Jason Jystad, 10/26/2001 -
I'm trying to set my system at home (XP64) up to allow remote connections. Here's my setup: - DSL with static IPs - Router configured as DHCP server, and IP's are assigned according to MAC address (so the same computer always gets the same internal IP) - NAT is turned on, assigning specific external IPs to associated LAN boxes The things I've done: - Remote Connection is configured to use a specific port (I changed the registry to set this port value, and I've verified after a reboot that the desired port is still specified). - Router firewall is configured to forward all TCP/IP traffic on the specified port to the desired LAN box. - Allow remote connections is turned on. - The desired user accounts have been added to the list of accounts that are allowed to remote in. When I try to connect from work (using Vista64, and typing the IP:port), I get the message: This computer can't connect to the remote computer If I try the same thing on one of my computers at home (a XP-32 laptop), it works fine (and yes, it's going out of the router and back in because it has a different IP address). The systems folks here at work say they're not blocking any outbound traffic, so that leads me to believe that I have a configuration problem somewhere. What have I missed?
"Why don't you tie a kerosene-soaked rag around your ankles so the ants won't climb up and eat your candy ass..." - Dale Earnhardt, 1997
-----
"...the staggering layers of obscenity in your statement make it a work of art on so many levels." - Jason Jystad, 10/26/2001Reconfigure your home router/firewall for detection and assumption that a black hole router is in-stream.
MrPlankton
The Second Amendment, the Reset Button on the Constitution -
Reconfigure your home router/firewall for detection and assumption that a black hole router is in-stream.
MrPlankton
The Second Amendment, the Reset Button on the ConstitutionWhat?
"Why don't you tie a kerosene-soaked rag around your ankles so the ants won't climb up and eat your candy ass..." - Dale Earnhardt, 1997
-----
"...the staggering layers of obscenity in your statement make it a work of art on so many levels." - Jason Jystad, 10/26/2001 -
What?
"Why don't you tie a kerosene-soaked rag around your ankles so the ants won't climb up and eat your candy ass..." - Dale Earnhardt, 1997
-----
"...the staggering layers of obscenity in your statement make it a work of art on so many levels." - Jason Jystad, 10/26/2001MrPlankton
The Second Amendment, the Reset Button on the Constitution -
I'm trying to set my system at home (XP64) up to allow remote connections. Here's my setup: - DSL with static IPs - Router configured as DHCP server, and IP's are assigned according to MAC address (so the same computer always gets the same internal IP) - NAT is turned on, assigning specific external IPs to associated LAN boxes The things I've done: - Remote Connection is configured to use a specific port (I changed the registry to set this port value, and I've verified after a reboot that the desired port is still specified). - Router firewall is configured to forward all TCP/IP traffic on the specified port to the desired LAN box. - Allow remote connections is turned on. - The desired user accounts have been added to the list of accounts that are allowed to remote in. When I try to connect from work (using Vista64, and typing the IP:port), I get the message: This computer can't connect to the remote computer If I try the same thing on one of my computers at home (a XP-32 laptop), it works fine (and yes, it's going out of the router and back in because it has a different IP address). The systems folks here at work say they're not blocking any outbound traffic, so that leads me to believe that I have a configuration problem somewhere. What have I missed?
"Why don't you tie a kerosene-soaked rag around your ankles so the ants won't climb up and eat your candy ass..." - Dale Earnhardt, 1997
-----
"...the staggering layers of obscenity in your statement make it a work of art on so many levels." - Jason Jystad, 10/26/2001I ran into this configuring my own system. I bet your firewall is blocking the port. At least on my systems (XPSP3 32 bit) the pre defined Remote Desktop exception is hardwired to port 3389 so if you change the port you need to create a new exception. Try this (I'm assuming windows firewall). Make sure exceptions are enabled. On the exceptions tab, add a new port, specifying the port you assigned to remote access. Select TCP and make sure the scope allows 'Any computer (including those on the internet)'. [Edit] Shoulda read all the responses - if you're not running a software firewall then the above advice will resemble a one legged man in a bum kicking contest [/Edit]
Rob Manderson My bloghttp://robmanderson.blogspot.com[^]
-
Don't I need a telnet server running on the remote box?
"Why don't you tie a kerosene-soaked rag around your ankles so the ants won't climb up and eat your candy ass..." - Dale Earnhardt, 1997
-----
"...the staggering layers of obscenity in your statement make it a work of art on so many levels." - Jason Jystad, 10/26/2001As Zoltan suggested try
telnet computer-ip-address remote-desktop-portin command prompt at your office, just to see if you can establish TCP connection with home PC at specified port. You don't need telnet server, all you need is something thatlistenson that port and you already have Remote Desktop enabled. If you can establish connection you'll get blank screen, otherwise telnet client will display error :) -
Go to your neighbors house. It will be easier to troubleshoot running across the street rather than downtown. Bring a six-pack and they will say yes.
Need custom software developed? I do C# development and consulting all over the United States.
If you don't ask questions the answers won't stand in your way.
Doing a job is like selecting a mule, you can't choose just the front half xor the back half so when you ask me to do a job don't expect me to do it half-assed.Ennis Ray Lynch, Jr. wrote:
Go to your neighbors house... Bring a six-pack
You live next to John then? :)
Luc Pattyn [Forum Guidelines] [My Articles]
- before you ask a question here, search CodeProject, then Google - the quality and detail of your question reflects on the effectiveness of the help you are likely to get - use the code block button (PRE tags) to preserve formatting when showing multi-line code snippets
-
I'm trying to set my system at home (XP64) up to allow remote connections. Here's my setup: - DSL with static IPs - Router configured as DHCP server, and IP's are assigned according to MAC address (so the same computer always gets the same internal IP) - NAT is turned on, assigning specific external IPs to associated LAN boxes The things I've done: - Remote Connection is configured to use a specific port (I changed the registry to set this port value, and I've verified after a reboot that the desired port is still specified). - Router firewall is configured to forward all TCP/IP traffic on the specified port to the desired LAN box. - Allow remote connections is turned on. - The desired user accounts have been added to the list of accounts that are allowed to remote in. When I try to connect from work (using Vista64, and typing the IP:port), I get the message: This computer can't connect to the remote computer If I try the same thing on one of my computers at home (a XP-32 laptop), it works fine (and yes, it's going out of the router and back in because it has a different IP address). The systems folks here at work say they're not blocking any outbound traffic, so that leads me to believe that I have a configuration problem somewhere. What have I missed?
"Why don't you tie a kerosene-soaked rag around your ankles so the ants won't climb up and eat your candy ass..." - Dale Earnhardt, 1997
-----
"...the staggering layers of obscenity in your statement make it a work of art on so many levels." - Jason Jystad, 10/26/2001On your port forwarding rule in the firewall see if there is a SNAT (Source NAT) option and make sure its enabled. I had a similar issue this week when setting up a new subset behind a new router, the ports where all forwarded correctly but I was unable to establish a connection. It turns out the router i was using was passing the data to the backend machine running RDP but then when it was replying the gateway was sending the data from its own IP address and, of course, the client didn't know where the data was coming from. Source NAT will make the data appear to come from the IP of the backend machine and not the gateway and solve this issue (or at least did for me).
Richard Green
-
As Zoltan suggested try
telnet computer-ip-address remote-desktop-portin command prompt at your office, just to see if you can establish TCP connection with home PC at specified port. You don't need telnet server, all you need is something thatlistenson that port and you already have Remote Desktop enabled. If you can establish connection you'll get blank screen, otherwise telnet client will display error :)Well, it gave an error. But it also gave an error on port 80 for my web server, which I know for a fact works fine.
"Why don't you tie a kerosene-soaked rag around your ankles so the ants won't climb up and eat your candy ass..." - Dale Earnhardt, 1997
-----
"...the staggering layers of obscenity in your statement make it a work of art on so many levels." - Jason Jystad, 10/26/2001 -
I'm trying to set my system at home (XP64) up to allow remote connections. Here's my setup: - DSL with static IPs - Router configured as DHCP server, and IP's are assigned according to MAC address (so the same computer always gets the same internal IP) - NAT is turned on, assigning specific external IPs to associated LAN boxes The things I've done: - Remote Connection is configured to use a specific port (I changed the registry to set this port value, and I've verified after a reboot that the desired port is still specified). - Router firewall is configured to forward all TCP/IP traffic on the specified port to the desired LAN box. - Allow remote connections is turned on. - The desired user accounts have been added to the list of accounts that are allowed to remote in. When I try to connect from work (using Vista64, and typing the IP:port), I get the message: This computer can't connect to the remote computer If I try the same thing on one of my computers at home (a XP-32 laptop), it works fine (and yes, it's going out of the router and back in because it has a different IP address). The systems folks here at work say they're not blocking any outbound traffic, so that leads me to believe that I have a configuration problem somewhere. What have I missed?
"Why don't you tie a kerosene-soaked rag around your ankles so the ants won't climb up and eat your candy ass..." - Dale Earnhardt, 1997
-----
"...the staggering layers of obscenity in your statement make it a work of art on so many levels." - Jason Jystad, 10/26/2001I think the best advice was to try it from another network like a wifi hotspot etc. "System folks at work" generally can't tell their elbow from their asshole and there's a very good chance one or both isp's *are* blocking certain ports. What you need to do is enable as many services on your home box as possible so you can try them all, i.e. a web server, telnet, mail, etc then try it from another network.
"It's so simple to be wise. Just think of something stupid to say and then don't say it." -Sam Levenson
-
Well, it gave an error. But it also gave an error on port 80 for my web server, which I know for a fact works fine.
"Why don't you tie a kerosene-soaked rag around your ankles so the ants won't climb up and eat your candy ass..." - Dale Earnhardt, 1997
-----
"...the staggering layers of obscenity in your statement make it a work of art on so many levels." - Jason Jystad, 10/26/2001Are you sure the syntax is correct? Don't use
:to split host and port. For example:telnet 192.168.0.1 80
