the while(1) loop
-
Ralph_2 wrote:
Anyone from Embedded Systems backround?
Yes!
Ralph_2 wrote:
Presently into it?
Always! ;)
Ali
-
me, me. Wonder why you got a one vote.
Current languages - Assembly, C, C# Current Book - The Sea - John Banville Current Albums - Ashes of the Wake - LOG
-
Even i wonder..... :) Has your name got anything to do with the Blackfin (DSP??) processor? :)
-
yep. why? PS: avoiding warnings. :)
Luc Pattyn [Forum Guidelines] [My Articles]
DISCLAIMER: this message may have been modified by others; it may no longer reflect what I intended, and may contain bad advice; use at your own risk and with extreme care.
-
yep. why? PS: avoiding warnings. :)
Luc Pattyn [Forum Guidelines] [My Articles]
DISCLAIMER: this message may have been modified by others; it may no longer reflect what I intended, and may contain bad advice; use at your own risk and with extreme care.
-
Ralph_2 wrote:
Anyone from Embedded Systems backround?
Nope.
Ralph_2 wrote:
Presently into it?
Yes: causing damages due to lack of background... :rolleyes: :)
If the Lord God Almighty had consulted me before embarking upon the Creation, I would have recommended something simpler. -- Alfonso the Wise, 13th Century King of Castile.
This is going on my arrogant assumptions. You may have a superb reason why I'm completely wrong. -- Iain Clarke
[My articles] -
Ralph_2 wrote:
Anyone from Embedded Systems backround?
Yes!
Ralph_2 wrote:
Presently into it?
Always! ;)
Ali
-
I was a few years ago. So where is the fire? P.S.:Just don't tell me that you are using while(1) for searching a char buffer terminator...
The narrow specialist in the broad sense of the word is a complete idiot in the narrow sense of the word. Advertise here – minimum three posts per day are guaranteed.
-
I was a few years ago. So where is the fire? P.S.:Just don't tell me that you are using while(1) for searching a char buffer terminator...
The narrow specialist in the broad sense of the word is a complete idiot in the narrow sense of the word. Advertise here – minimum three posts per day are guaranteed.
-
So you too are in the embedded world... What are you doing exactly ? Hardware engineer writing software is quite vague ...
Rage wrote:
What are you doing exactly ?
Brace yourself for a very boring story (you will wish you never asked!) I started as an Electronics Engineer (designing analogue and digital circuits, laying out pcb's, the lot) and as part of that I wrote Firmware for Embedded Systems (by that I mean little micros / microcontroller type jobbies). I moved to a company where I did more firmware than hardware, and I enjoyed it. Then when the small firm I worked for lost its PC Software Programmer I took over that too. Hence I end up being a hardware engineer who writes software. I am very at home with soldering irons and oscilloscopes etc, and I see my PC as more of a tool than anything else. I like writing Firmware because ... well actually I am not sure why, I enjoy the challenge (lots of the stuff I do involves precise timing and measurement, and it can be quite tricky) and I think PC's are a pain. I can make my embedded systems virtually perfect, run like a dream, a work of art ....... with PC software there are always problems! Truth is I do lots of different stuff, I am very lucky! :-D What's your story?
Ali
-
Yes, the story is about an evil dishwasher machine leading her hordes of toasters in their way to word domination.
The narrow specialist in the broad sense of the word is a complete idiot in the narrow sense of the word. Advertise here – minimum three posts per day are guaranteed.
-
Rage wrote:
What are you doing exactly ?
Brace yourself for a very boring story (you will wish you never asked!) I started as an Electronics Engineer (designing analogue and digital circuits, laying out pcb's, the lot) and as part of that I wrote Firmware for Embedded Systems (by that I mean little micros / microcontroller type jobbies). I moved to a company where I did more firmware than hardware, and I enjoyed it. Then when the small firm I worked for lost its PC Software Programmer I took over that too. Hence I end up being a hardware engineer who writes software. I am very at home with soldering irons and oscilloscopes etc, and I see my PC as more of a tool than anything else. I like writing Firmware because ... well actually I am not sure why, I enjoy the challenge (lots of the stuff I do involves precise timing and measurement, and it can be quite tricky) and I think PC's are a pain. I can make my embedded systems virtually perfect, run like a dream, a work of art ....... with PC software there are always problems! Truth is I do lots of different stuff, I am very lucky! :-D What's your story?
Ali
Very cool :cool: My story : Started as embedded in the automotive industry, writing firmware for automatic gearboxes, then wrote firmware for signal measurement devices (hence I know what you mean with working with oscilloscopes & co) and the associated PC driver for configuring/interfacing the devices, and finally moved in the process world (I am a CMMI expert), so no software at all anymore except from VB in document templates :| What are you programming your firmware in ? Assembler, C ? ... Labview ?
-
Very cool :cool: My story : Started as embedded in the automotive industry, writing firmware for automatic gearboxes, then wrote firmware for signal measurement devices (hence I know what you mean with working with oscilloscopes & co) and the associated PC driver for configuring/interfacing the devices, and finally moved in the process world (I am a CMMI expert), so no software at all anymore except from VB in document templates :| What are you programming your firmware in ? Assembler, C ? ... Labview ?
Rage wrote:
Very cool
Thanks :thumbsup:
Rage wrote:
writing firmware for automatic gearboxes
Sounds pretty cool too! :cool:
Rage wrote:
I am a CMMI expert
Had to Google that! Sounds v tricky!
Rage wrote:
What are you programming your firmware in ?
All my current Firmware is in C on various PIC's, I love Assembler but most projects are too large to justify it so C is my weapon of choice. Keeps me off the streets anyway! :-D
Ali
-
Rage wrote:
Very cool
Thanks :thumbsup:
Rage wrote:
writing firmware for automatic gearboxes
Sounds pretty cool too! :cool:
Rage wrote:
I am a CMMI expert
Had to Google that! Sounds v tricky!
Rage wrote:
What are you programming your firmware in ?
All my current Firmware is in C on various PIC's, I love Assembler but most projects are too large to justify it so C is my weapon of choice. Keeps me off the streets anyway! :-D
Ali
-
Rage wrote:
What are you doing exactly ?
Brace yourself for a very boring story (you will wish you never asked!) I started as an Electronics Engineer (designing analogue and digital circuits, laying out pcb's, the lot) and as part of that I wrote Firmware for Embedded Systems (by that I mean little micros / microcontroller type jobbies). I moved to a company where I did more firmware than hardware, and I enjoyed it. Then when the small firm I worked for lost its PC Software Programmer I took over that too. Hence I end up being a hardware engineer who writes software. I am very at home with soldering irons and oscilloscopes etc, and I see my PC as more of a tool than anything else. I like writing Firmware because ... well actually I am not sure why, I enjoy the challenge (lots of the stuff I do involves precise timing and measurement, and it can be quite tricky) and I think PC's are a pain. I can make my embedded systems virtually perfect, run like a dream, a work of art ....... with PC software there are always problems! Truth is I do lots of different stuff, I am very lucky! :-D What's your story?
Ali
Alison Pentland wrote:
I am very at home with soldering irons and oscilloscopes etc
Aahh.....my best soldering experience was with a 64-pin TQFP package 8051-core controller chip..me felt like a surgeon:cool:
Alison Pentland wrote:
I can make my embedded systems virtually perfect, run like a dream, a work of art ....... with PC software there are always problems!
Well, I m not quite there yet to always make things absolutely perfect...but, yes, PC sofware have always been a problem....man, you control EVERY aspect in an embedded system..
-
Alison Pentland wrote:
I am very at home with soldering irons and oscilloscopes etc
Aahh.....my best soldering experience was with a 64-pin TQFP package 8051-core controller chip..me felt like a surgeon:cool:
Alison Pentland wrote:
I can make my embedded systems virtually perfect, run like a dream, a work of art ....... with PC software there are always problems!
Well, I m not quite there yet to always make things absolutely perfect...but, yes, PC sofware have always been a problem....man, you control EVERY aspect in an embedded system..
Ralph_2 wrote:
man, you control EVERY aspect in an embedded system..
Yes, that is exactly what I mean! I have tried to explain this to the guys here many times and they just don't understand. It is so nice to find someone else who gets it, that is why I had to reply even though it is a day later. When I write for Windows I feel like a cog in a badly built machine, but when I write for my embedded systems I am God! :-D :-D
Ralph_2 wrote:
Well, I m not quite there yet to always make things absolutely perfect
:-O I am exagerating for effect, I cann't make everything always absolutely perfect either! :-O
Ali
-
I prefer: #define true 1 while (true){ }