JUST A QUESTION OF STANDARDS
-
Does the statement, "We've always done it that way" ring any bells...? Did you know that a major design feature of the Space Shuttle was determined by the width of a horse over 2,000 years ago!!!!! The US standard railroad gauge (distance between the rails) is 4 feet, 8.5 inches. That's an exceedingly odd number. Why was that gauge used? Because that's the way they built them in England, and English expatriates built the US Railroads. Why did the English build them like that? Because the first rail lines were built by the same people who built the pre-railroad tramways, and that's the gauge they used. Why did "they" use that gauge then? Because the people who built the tramways used the same jigs and tools that they used for building wagons, which used that wheel spacing. Okay! Why did the wagons have that particular odd wheel spacing? Well, if they tried to use any other spacing, the wagon wheels would break on some of the old, long distance roads in England, because that's the spacing of the wheel ruts. So who built those old rutted roads? Imperial Rome built the first long distance roads in Europe (and England) for their legions. The roads have been used ever since. And the ruts in the roads? Roman war chariots formed the initial ruts, which everyone else had to match for fear of destroying their wagon wheels. Since the chariots were made for Imperial Rome, they were all alike in the matter of wheel spacing. The United States standard railroad gauge of 4 feet, 8.5 inches is derived from the original specifications for an Imperial Roman war chariot. And bureaucracies live forever. So the next time you are handed a spec and told we have always done it that way and wonder what horse's ass came up with that, you may be exactly right, because the Imperial Roman war chariots were made just wide enough to accommodate the back ends of two war horses. Now the twist to the story... When you see a Space Shuttle sitting on its launch pad, there are two big booster rockets attached to the sides of the main fuel tank. These are solid rocket boosters, or SRBs. The SRBs are made by Thiokol at their factory in Utah. The engineers who designed the SRBs would have preferred to make them a bit fatter, but the SRBs had to be shipped by train from the factory to the launch site. The railroad line from the factory happens to run through a tunnel in the mountains. The SRBs had to fit through that tunnel. The tunnel is slightly wider than the railroad track, and the railroad track, as you now know, is about
-
Does the statement, "We've always done it that way" ring any bells...? Did you know that a major design feature of the Space Shuttle was determined by the width of a horse over 2,000 years ago!!!!! The US standard railroad gauge (distance between the rails) is 4 feet, 8.5 inches. That's an exceedingly odd number. Why was that gauge used? Because that's the way they built them in England, and English expatriates built the US Railroads. Why did the English build them like that? Because the first rail lines were built by the same people who built the pre-railroad tramways, and that's the gauge they used. Why did "they" use that gauge then? Because the people who built the tramways used the same jigs and tools that they used for building wagons, which used that wheel spacing. Okay! Why did the wagons have that particular odd wheel spacing? Well, if they tried to use any other spacing, the wagon wheels would break on some of the old, long distance roads in England, because that's the spacing of the wheel ruts. So who built those old rutted roads? Imperial Rome built the first long distance roads in Europe (and England) for their legions. The roads have been used ever since. And the ruts in the roads? Roman war chariots formed the initial ruts, which everyone else had to match for fear of destroying their wagon wheels. Since the chariots were made for Imperial Rome, they were all alike in the matter of wheel spacing. The United States standard railroad gauge of 4 feet, 8.5 inches is derived from the original specifications for an Imperial Roman war chariot. And bureaucracies live forever. So the next time you are handed a spec and told we have always done it that way and wonder what horse's ass came up with that, you may be exactly right, because the Imperial Roman war chariots were made just wide enough to accommodate the back ends of two war horses. Now the twist to the story... When you see a Space Shuttle sitting on its launch pad, there are two big booster rockets attached to the sides of the main fuel tank. These are solid rocket boosters, or SRBs. The SRBs are made by Thiokol at their factory in Utah. The engineers who designed the SRBs would have preferred to make them a bit fatter, but the SRBs had to be shipped by train from the factory to the launch site. The railroad line from the factory happens to run through a tunnel in the mountains. The SRBs had to fit through that tunnel. The tunnel is slightly wider than the railroad track, and the railroad track, as you now know, is about
a man saw his wife cutting the end bit off the sunday roast ham before putting it in the oven "why do u cut the end off?" he asked "cos my mother always did it" she replied when the man next meets the mother he asks "why do u always cut the end off the ham before cooking it?" she replies "cos my mother always did it" when he meets the grandmother he asks "why do u always cut the end off the ham before cooking it?" she replies "cos when i was young we only had a small oven and it wouldnt fit in " nuff said?
-
a man saw his wife cutting the end bit off the sunday roast ham before putting it in the oven "why do u cut the end off?" he asked "cos my mother always did it" she replied when the man next meets the mother he asks "why do u always cut the end off the ham before cooking it?" she replies "cos my mother always did it" when he meets the grandmother he asks "why do u always cut the end off the ham before cooking it?" she replies "cos when i was young we only had a small oven and it wouldnt fit in " nuff said?
I guess I'd just get into all sorts of trouble if I observed that the guy used a Space Shuttle example and the girl used a cooking example... No, wait, put down that rock, I was only kidding!!! :-D Chistopher Duncan Author - The Career Programmer: Guerilla Tactics for an Imperfect World (Apress)
-
Does the statement, "We've always done it that way" ring any bells...? Did you know that a major design feature of the Space Shuttle was determined by the width of a horse over 2,000 years ago!!!!! The US standard railroad gauge (distance between the rails) is 4 feet, 8.5 inches. That's an exceedingly odd number. Why was that gauge used? Because that's the way they built them in England, and English expatriates built the US Railroads. Why did the English build them like that? Because the first rail lines were built by the same people who built the pre-railroad tramways, and that's the gauge they used. Why did "they" use that gauge then? Because the people who built the tramways used the same jigs and tools that they used for building wagons, which used that wheel spacing. Okay! Why did the wagons have that particular odd wheel spacing? Well, if they tried to use any other spacing, the wagon wheels would break on some of the old, long distance roads in England, because that's the spacing of the wheel ruts. So who built those old rutted roads? Imperial Rome built the first long distance roads in Europe (and England) for their legions. The roads have been used ever since. And the ruts in the roads? Roman war chariots formed the initial ruts, which everyone else had to match for fear of destroying their wagon wheels. Since the chariots were made for Imperial Rome, they were all alike in the matter of wheel spacing. The United States standard railroad gauge of 4 feet, 8.5 inches is derived from the original specifications for an Imperial Roman war chariot. And bureaucracies live forever. So the next time you are handed a spec and told we have always done it that way and wonder what horse's ass came up with that, you may be exactly right, because the Imperial Roman war chariots were made just wide enough to accommodate the back ends of two war horses. Now the twist to the story... When you see a Space Shuttle sitting on its launch pad, there are two big booster rockets attached to the sides of the main fuel tank. These are solid rocket boosters, or SRBs. The SRBs are made by Thiokol at their factory in Utah. The engineers who designed the SRBs would have preferred to make them a bit fatter, but the SRBs had to be shipped by train from the factory to the launch site. The railroad line from the factory happens to run through a tunnel in the mountains. The SRBs had to fit through that tunnel. The tunnel is slightly wider than the railroad track, and the railroad track, as you now know, is about
-
I guess I'd just get into all sorts of trouble if I observed that the guy used a Space Shuttle example and the girl used a cooking example... No, wait, put down that rock, I was only kidding!!! :-D Chistopher Duncan Author - The Career Programmer: Guerilla Tactics for an Imperfect World (Apress)
Christopher Duncan wrote: the girl used a cooking example... You're in deep doodoo now... Just wait until Lauren gets back from shopping - you're gonna catch it! ;P It is ok for women not to like sports, so long as they nod in the right places and bring beers at the right times.
Paul Watson, on Sports - 2/10/2003 -
Does the statement, "We've always done it that way" ring any bells...? Did you know that a major design feature of the Space Shuttle was determined by the width of a horse over 2,000 years ago!!!!! The US standard railroad gauge (distance between the rails) is 4 feet, 8.5 inches. That's an exceedingly odd number. Why was that gauge used? Because that's the way they built them in England, and English expatriates built the US Railroads. Why did the English build them like that? Because the first rail lines were built by the same people who built the pre-railroad tramways, and that's the gauge they used. Why did "they" use that gauge then? Because the people who built the tramways used the same jigs and tools that they used for building wagons, which used that wheel spacing. Okay! Why did the wagons have that particular odd wheel spacing? Well, if they tried to use any other spacing, the wagon wheels would break on some of the old, long distance roads in England, because that's the spacing of the wheel ruts. So who built those old rutted roads? Imperial Rome built the first long distance roads in Europe (and England) for their legions. The roads have been used ever since. And the ruts in the roads? Roman war chariots formed the initial ruts, which everyone else had to match for fear of destroying their wagon wheels. Since the chariots were made for Imperial Rome, they were all alike in the matter of wheel spacing. The United States standard railroad gauge of 4 feet, 8.5 inches is derived from the original specifications for an Imperial Roman war chariot. And bureaucracies live forever. So the next time you are handed a spec and told we have always done it that way and wonder what horse's ass came up with that, you may be exactly right, because the Imperial Roman war chariots were made just wide enough to accommodate the back ends of two war horses. Now the twist to the story... When you see a Space Shuttle sitting on its launch pad, there are two big booster rockets attached to the sides of the main fuel tank. These are solid rocket boosters, or SRBs. The SRBs are made by Thiokol at their factory in Utah. The engineers who designed the SRBs would have preferred to make them a bit fatter, but the SRBs had to be shipped by train from the factory to the launch site. The railroad line from the factory happens to run through a tunnel in the mountains. The SRBs had to fit through that tunnel. The tunnel is slightly wider than the railroad track, and the railroad track, as you now know, is about
Interesting story but I am not sure it deserves being labeled as "We've always done it that way." The folks who carried on the tradition of the rail size were simply being efficient in their work by reusing existing ideas, tools and materials. Why reinvent things that work? Todd
-
Does the statement, "We've always done it that way" ring any bells...? Did you know that a major design feature of the Space Shuttle was determined by the width of a horse over 2,000 years ago!!!!! The US standard railroad gauge (distance between the rails) is 4 feet, 8.5 inches. That's an exceedingly odd number. Why was that gauge used? Because that's the way they built them in England, and English expatriates built the US Railroads. Why did the English build them like that? Because the first rail lines were built by the same people who built the pre-railroad tramways, and that's the gauge they used. Why did "they" use that gauge then? Because the people who built the tramways used the same jigs and tools that they used for building wagons, which used that wheel spacing. Okay! Why did the wagons have that particular odd wheel spacing? Well, if they tried to use any other spacing, the wagon wheels would break on some of the old, long distance roads in England, because that's the spacing of the wheel ruts. So who built those old rutted roads? Imperial Rome built the first long distance roads in Europe (and England) for their legions. The roads have been used ever since. And the ruts in the roads? Roman war chariots formed the initial ruts, which everyone else had to match for fear of destroying their wagon wheels. Since the chariots were made for Imperial Rome, they were all alike in the matter of wheel spacing. The United States standard railroad gauge of 4 feet, 8.5 inches is derived from the original specifications for an Imperial Roman war chariot. And bureaucracies live forever. So the next time you are handed a spec and told we have always done it that way and wonder what horse's ass came up with that, you may be exactly right, because the Imperial Roman war chariots were made just wide enough to accommodate the back ends of two war horses. Now the twist to the story... When you see a Space Shuttle sitting on its launch pad, there are two big booster rockets attached to the sides of the main fuel tank. These are solid rocket boosters, or SRBs. The SRBs are made by Thiokol at their factory in Utah. The engineers who designed the SRBs would have preferred to make them a bit fatter, but the SRBs had to be shipped by train from the factory to the launch site. The railroad line from the factory happens to run through a tunnel in the mountains. The SRBs had to fit through that tunnel. The tunnel is slightly wider than the railroad track, and the railroad track, as you now know, is about
Sorry - that's on old urban myth[^] cheers, Chris Maunder
-
Christopher Duncan wrote: the girl used a cooking example... You're in deep doodoo now... Just wait until Lauren gets back from shopping - you're gonna catch it! ;P It is ok for women not to like sports, so long as they nod in the right places and bring beers at the right times.
Paul Watson, on Sports - 2/10/2003 -
I guess I'd just get into all sorts of trouble if I observed that the guy used a Space Shuttle example and the girl used a cooking example... No, wait, put down that rock, I was only kidding!!! :-D Chistopher Duncan Author - The Career Programmer: Guerilla Tactics for an Imperfect World (Apress)
-
Sorry - that's on old urban myth[^] cheers, Chris Maunder
Chris Maunder wrote: Sorry - that's on old urban myth[^] Pull your head in Chris. The Lounge is no place for facts, you know that. ;P Michael Martin Australia mjm68@tpg.com.au "I personally love it because I can get as down and dirty as I want on the backend, while also being able to dabble with fun scripting and presentation games on the front end." - Chris Maunder 15/07/2002