Have any of you ever built your own computer desk?
-
I guess it's Do It Yourself weekend here in the Lounge :) . I have decided to build my own desk for my home office. The thing I have now is a cheaper, flimsier and suckier version of this[^]. I have had it for 12 years and it is time to get rid of it, especially since I am currently working on something where I need at least one more computer right next to my main system. I found this web site[^] (jump to the finished product[^]) and I like a couple of things about her approach: 1) Most of it can be laid out on a sheet of plywood that you have them cut out at the lumber yard. 2) The height of the desk is the height of a standard keyboard tray, so you don't have to fight with that (I really hate my keyboard tray). I actually want to expand this into an L-shaped desk, where the other part is the height of a standard desk. I think I can figure out how to do it, but I am still in the planning stages. Any tips or ideas? Soren Madsen
"When you don't know what you're doing it's best to do it quickly" - Jase #DuckDynasty
I've thought about building a little more elaborate of a desk than you have posted. Unfortunately I also have a half-finished basement to complete and a baby on the way so I get to stick with my hand-me-down desks from the 70's :) Someday maybe, I'd like to build a 3 piece corner desk but I'd probably use something nice for the top like oak or redwood.
-
I guess it's Do It Yourself weekend here in the Lounge :) . I have decided to build my own desk for my home office. The thing I have now is a cheaper, flimsier and suckier version of this[^]. I have had it for 12 years and it is time to get rid of it, especially since I am currently working on something where I need at least one more computer right next to my main system. I found this web site[^] (jump to the finished product[^]) and I like a couple of things about her approach: 1) Most of it can be laid out on a sheet of plywood that you have them cut out at the lumber yard. 2) The height of the desk is the height of a standard keyboard tray, so you don't have to fight with that (I really hate my keyboard tray). I actually want to expand this into an L-shaped desk, where the other part is the height of a standard desk. I think I can figure out how to do it, but I am still in the planning stages. Any tips or ideas? Soren Madsen
"When you don't know what you're doing it's best to do it quickly" - Jase #DuckDynasty
I built a nice one with room for computer, 2 monitors, printer, overhead book shelf and extras. The main things are; 1) do you have the woodworking tools to do the work, 2) do you have the experience. If you don't have the tools and/or the experience I would keep it real simple. As far as them cutting it for you at the lumber yard they usually limit the amount of cuts unless you get a nice guy that's really bored and talk nice to him. :)
VS2010/Atmel Studio 6.1 ToDo Manager Extension Relax...We're all crazy it's not a competition!
-
I've thought about building a little more elaborate of a desk than you have posted. Unfortunately I also have a half-finished basement to complete and a baby on the way so I get to stick with my hand-me-down desks from the 70's :) Someday maybe, I'd like to build a 3 piece corner desk but I'd probably use something nice for the top like oak or redwood.
I think I need to get this done quickly, or I am sure I will end up with something a lot more elaborate than I really need right now. I have other things to do as well. I am resurfacing my kitchen cabinets - just taking the existing lacquer and stain off, sanding them down, re-staining them and putting new hardware on them. It is taking longer than I had hoped. :^) Soren Madsen
"When you don't know what you're doing it's best to do it quickly" - Jase #DuckDynasty
-
I built a nice one with room for computer, 2 monitors, printer, overhead book shelf and extras. The main things are; 1) do you have the woodworking tools to do the work, 2) do you have the experience. If you don't have the tools and/or the experience I would keep it real simple. As far as them cutting it for you at the lumber yard they usually limit the amount of cuts unless you get a nice guy that's really bored and talk nice to him. :)
VS2010/Atmel Studio 6.1 ToDo Manager Extension Relax...We're all crazy it's not a competition!
Well, I have some tools and some experience, but I am not looking for something super nice. I need a desk upgrade right now and I definitely have to go with an inexpensive solution.
Mike Hankey wrote:
As far as them cutting it for you at the lumber yard they usually limit the amount of cuts
I think Home Depot will make two cuts. I assume they they just charge a bit per extra cut, but maybe I am wrong. Soren Madsen
"When you don't know what you're doing it's best to do it quickly" - Jase #DuckDynasty
-
I guess it's Do It Yourself weekend here in the Lounge :) . I have decided to build my own desk for my home office. The thing I have now is a cheaper, flimsier and suckier version of this[^]. I have had it for 12 years and it is time to get rid of it, especially since I am currently working on something where I need at least one more computer right next to my main system. I found this web site[^] (jump to the finished product[^]) and I like a couple of things about her approach: 1) Most of it can be laid out on a sheet of plywood that you have them cut out at the lumber yard. 2) The height of the desk is the height of a standard keyboard tray, so you don't have to fight with that (I really hate my keyboard tray). I actually want to expand this into an L-shaped desk, where the other part is the height of a standard desk. I think I can figure out how to do it, but I am still in the planning stages. Any tips or ideas? Soren Madsen
"When you don't know what you're doing it's best to do it quickly" - Jase #DuckDynasty
One justification to diy is to get the ergonomics correct. Your proposed design seems to miss out there. https://www.google.com.au/#q=correct+sitting+position+at+computer[^]
Peter Wasser Art is making something out of nothing and selling it. Frank Zappa
-
One justification to diy is to get the ergonomics correct. Your proposed design seems to miss out there. https://www.google.com.au/#q=correct+sitting+position+at+computer[^]
Peter Wasser Art is making something out of nothing and selling it. Frank Zappa
Do you mean the height of the table? Sorry, but that Google link doesn't really clarify what you have on your mind and for all I know, you could be thinking about the position of the monitor. I am planning on adjusting the height of the table to have it match my size (I am not a large guy), but I have not checked where my monitor would line up, so that is one thing I should do before I start. Soren Madsen
"When you don't know what you're doing it's best to do it quickly" - Jase #DuckDynasty
-
Do you mean the height of the table? Sorry, but that Google link doesn't really clarify what you have on your mind and for all I know, you could be thinking about the position of the monitor. I am planning on adjusting the height of the table to have it match my size (I am not a large guy), but I have not checked where my monitor would line up, so that is one thing I should do before I start. Soren Madsen
"When you don't know what you're doing it's best to do it quickly" - Jase #DuckDynasty
I used the google search because there is strong agreement on the seating position - just pick any result. Getting the angle of the arms and the position of the monitor with respect to the head are very important. http://hubpages.com/hub/Proper_Posture_for_Computer_Use[^] If you have taken that into account then excellent. I was just trying to emphasise the importance.
Peter Wasser Art is making something out of nothing and selling it. Frank Zappa
-
I guess it's Do It Yourself weekend here in the Lounge :) . I have decided to build my own desk for my home office. The thing I have now is a cheaper, flimsier and suckier version of this[^]. I have had it for 12 years and it is time to get rid of it, especially since I am currently working on something where I need at least one more computer right next to my main system. I found this web site[^] (jump to the finished product[^]) and I like a couple of things about her approach: 1) Most of it can be laid out on a sheet of plywood that you have them cut out at the lumber yard. 2) The height of the desk is the height of a standard keyboard tray, so you don't have to fight with that (I really hate my keyboard tray). I actually want to expand this into an L-shaped desk, where the other part is the height of a standard desk. I think I can figure out how to do it, but I am still in the planning stages. Any tips or ideas? Soren Madsen
"When you don't know what you're doing it's best to do it quickly" - Jase #DuckDynasty
Big budget - buy an oak one. Small budget - go to Ikea. Place computer underneath, keyboard, monitor, mouse etc. on top - plug in and enjoy. No saws/drills/screws required!
Regards, Rob Philpott.
-
I used the google search because there is strong agreement on the seating position - just pick any result. Getting the angle of the arms and the position of the monitor with respect to the head are very important. http://hubpages.com/hub/Proper_Posture_for_Computer_Use[^] If you have taken that into account then excellent. I was just trying to emphasise the importance.
Peter Wasser Art is making something out of nothing and selling it. Frank Zappa
Yes, actually most of them show that your eyes should line up with the top of the monitor, but some have the eyes more between the top and the middle. as far as the angle of the arms, that should be taken care of by having the height of the table match the keyboard tray. It will make it a bit lower than a standard desk, but that's why I want to expand into an L-shaped thing. The two parts don't have to be joined as far as I am concerned. Anyway, thanks. I think I will have to do some modifications to get the monitor lined up right. Soren Madsen
"When you don't know what you're doing it's best to do it quickly" - Jase #DuckDynasty
-
Yes, actually most of them show that your eyes should line up with the top of the monitor, but some have the eyes more between the top and the middle. as far as the angle of the arms, that should be taken care of by having the height of the table match the keyboard tray. It will make it a bit lower than a standard desk, but that's why I want to expand into an L-shaped thing. The two parts don't have to be joined as far as I am concerned. Anyway, thanks. I think I will have to do some modifications to get the monitor lined up right. Soren Madsen
"When you don't know what you're doing it's best to do it quickly" - Jase #DuckDynasty
The important thing with the monitor is that it is better to be bit lower than ideal than too high. That's why a flat desk works well as long as the monitor is not perched on the pc enclosure.
Peter Wasser Art is making something out of nothing and selling it. Frank Zappa
-
Big budget - buy an oak one. Small budget - go to Ikea. Place computer underneath, keyboard, monitor, mouse etc. on top - plug in and enjoy. No saws/drills/screws required!
Regards, Rob Philpott.
Doesn't really work like that. I have a "simple" desk - one level, round corner cut out, metal frame with power and data cable tracking: works fine for me. Similar to one quarter of this[^] but without the drawers. Herself has a much more complex IKEA object, with cubby holes, multiple level shelves, a keyboard tray...and I hate it. Every time I move I bang into something with a knee, or elbow. I have to keep pictures of it so I know how to reassemble it if I move it (because it's too heavy and cumbersome to move as one object) and you can't adjust the height of anything! Ok, it's solid and looks good - but to use it is a PITA! :laugh:
-
The important thing with the monitor is that it is better to be bit lower than ideal than too high. That's why a flat desk works well as long as the monitor is not perched on the pc enclosure.
Peter Wasser Art is making something out of nothing and selling it. Frank Zappa
...and that depends on the monitor, and it's orientation. I have two: one Portrait, and one landscape - they are arranged so that the tops of both line up and are at eye level.
-
Big budget - buy an oak one. Small budget - go to Ikea. Place computer underneath, keyboard, monitor, mouse etc. on top - plug in and enjoy. No saws/drills/screws required!
Regards, Rob Philpott.
My budget for this is tiny. I don't mind using saws, drills and sanders (except for the dust and the noise ;) ). I have bought quite a few things at Ikea in my time, but in this case I think I will be happier with what I can make from scratch as long as I can do better than this[^] :-D . The word 'plywood' does not have a great ring to it (personally, I hear it and in my mind I see this[^]), but the better quality products seem acceptable. I already looked at Ikea, Office Depot, Office Max, local furniture stores and other places, but the cheap computer desks are no better than what I have now and the price of anything better quickly go above my budget. Soren Madsen
"When you don't know what you're doing it's best to do it quickly" - Jase #DuckDynasty
-
I guess it's Do It Yourself weekend here in the Lounge :) . I have decided to build my own desk for my home office. The thing I have now is a cheaper, flimsier and suckier version of this[^]. I have had it for 12 years and it is time to get rid of it, especially since I am currently working on something where I need at least one more computer right next to my main system. I found this web site[^] (jump to the finished product[^]) and I like a couple of things about her approach: 1) Most of it can be laid out on a sheet of plywood that you have them cut out at the lumber yard. 2) The height of the desk is the height of a standard keyboard tray, so you don't have to fight with that (I really hate my keyboard tray). I actually want to expand this into an L-shaped desk, where the other part is the height of a standard desk. I think I can figure out how to do it, but I am still in the planning stages. Any tips or ideas? Soren Madsen
"When you don't know what you're doing it's best to do it quickly" - Jase #DuckDynasty
Yes a few of them. My first was an internal door on a frame. That one lasted about 10 years and 4 computers from a commodore 64 to a Pentium PC. My current one is a old dressing table with the top replaced with some half inch plywood and 2x1 pine for the bracers. Got draws and the desktop to the size I want it. Only problem now is with three 24 inch monitors it needs to be expanded. Oh well only £30 and a trip to the timber yard.
-
My budget for this is tiny. I don't mind using saws, drills and sanders (except for the dust and the noise ;) ). I have bought quite a few things at Ikea in my time, but in this case I think I will be happier with what I can make from scratch as long as I can do better than this[^] :-D . The word 'plywood' does not have a great ring to it (personally, I hear it and in my mind I see this[^]), but the better quality products seem acceptable. I already looked at Ikea, Office Depot, Office Max, local furniture stores and other places, but the cheap computer desks are no better than what I have now and the price of anything better quickly go above my budget. Soren Madsen
"When you don't know what you're doing it's best to do it quickly" - Jase #DuckDynasty
Try looking on FleaBay: we got Herself one there and it was a lot, lot cheaper than new (and a lot less hassle than building it from scratch if you don't have good woodworking skills and tools). I think new it was £250 and I got it for £30 plus the time and fuel to go collect it. Remember that it's not just cutting and sanding bits of plywood - it's the connecting them together so they don't wobble, are flat and square and stay that way that make it difficult!
-
Yes a few of them. My first was an internal door on a frame. That one lasted about 10 years and 4 computers from a commodore 64 to a Pentium PC. My current one is a old dressing table with the top replaced with some half inch plywood and 2x1 pine for the bracers. Got draws and the desktop to the size I want it. Only problem now is with three 24 inch monitors it needs to be expanded. Oh well only £30 and a trip to the timber yard.
-
What kind of plywood did you use or do you not care about the appearance? Soren Madsen
"When you don't know what you're doing it's best to do it quickly" - Jase #DuckDynasty
-
Try looking on FleaBay: we got Herself one there and it was a lot, lot cheaper than new (and a lot less hassle than building it from scratch if you don't have good woodworking skills and tools). I think new it was £250 and I got it for £30 plus the time and fuel to go collect it. Remember that it's not just cutting and sanding bits of plywood - it's the connecting them together so they don't wobble, are flat and square and stay that way that make it difficult!
I did take a quick look at eBay, but so many stores are selling their stuff there, that it can be tricky to get the filters set up. I think I mostly looked for L-shaped desks, so maybe I should have a second look. Thanks. About putting the plywood together so it doesn't wobble, it looks like the basic design in the article has features to make it sturdy. I am thinking about the backboard and the monitor shelf. I actually think it will be harder to avoid the top sagging. Soren Madsen
"When you don't know what you're doing it's best to do it quickly" - Jase #DuckDynasty
-
I did take a quick look at eBay, but so many stores are selling their stuff there, that it can be tricky to get the filters set up. I think I mostly looked for L-shaped desks, so maybe I should have a second look. Thanks. About putting the plywood together so it doesn't wobble, it looks like the basic design in the article has features to make it sturdy. I am thinking about the backboard and the monitor shelf. I actually think it will be harder to avoid the top sagging. Soren Madsen
"When you don't know what you're doing it's best to do it quickly" - Jase #DuckDynasty
Depends on the length, the weight you put on it, and the "wood" you use for the shelf. Thicker == less sag for a given distance, obviously... :laugh: If you are worried, then bracing in the middle can help a lot - but look at your bookshelves. Books weigh a lot, and if your shelves don't sag under that weight... Don't forget that the edges of plywood look horrible (and tend to be very "splintery") so you may need some iron-on veneer edging strips to tidy it up. It's also worth running a router with a rounding bit over the edges to easy pressure on your arms when leaning on it, and to round the corners off. Our bed has "slightly" rounded corners on the foot posts, and the number of nasty bruises I have picked up from walking past incautiously is silly! :laugh:
-
Depends on the length, the weight you put on it, and the "wood" you use for the shelf. Thicker == less sag for a given distance, obviously... :laugh: If you are worried, then bracing in the middle can help a lot - but look at your bookshelves. Books weigh a lot, and if your shelves don't sag under that weight... Don't forget that the edges of plywood look horrible (and tend to be very "splintery") so you may need some iron-on veneer edging strips to tidy it up. It's also worth running a router with a rounding bit over the edges to easy pressure on your arms when leaning on it, and to round the corners off. Our bed has "slightly" rounded corners on the foot posts, and the number of nasty bruises I have picked up from walking past incautiously is silly! :laugh:
Hmmm, you are pecking away at my worst fears, the finishing on the edges. I was kind of hoping that applying stain and sealer would make it smooth enough. Yeah, I was also thinking I have to smooth out all corners and edges. I rounded off the corners on the bedposts years ago. Those things were so sharp they drew blood on my legs a couple of times. :^) Soren Madsen
"When you don't know what you're doing it's best to do it quickly" - Jase #DuckDynasty
Ow~~_32-260x260-0-0.JPG){kind=link}
