Have any of you ever built your own computer desk?
-
Try looking on FleaBay: we got Herself one there and it was a lot, lot cheaper than new (and a lot less hassle than building it from scratch if you don't have good woodworking skills and tools). I think new it was £250 and I got it for £30 plus the time and fuel to go collect it. Remember that it's not just cutting and sanding bits of plywood - it's the connecting them together so they don't wobble, are flat and square and stay that way that make it difficult!
I did take a quick look at eBay, but so many stores are selling their stuff there, that it can be tricky to get the filters set up. I think I mostly looked for L-shaped desks, so maybe I should have a second look. Thanks. About putting the plywood together so it doesn't wobble, it looks like the basic design in the article has features to make it sturdy. I am thinking about the backboard and the monitor shelf. I actually think it will be harder to avoid the top sagging. Soren Madsen
"When you don't know what you're doing it's best to do it quickly" - Jase #DuckDynasty
-
I did take a quick look at eBay, but so many stores are selling their stuff there, that it can be tricky to get the filters set up. I think I mostly looked for L-shaped desks, so maybe I should have a second look. Thanks. About putting the plywood together so it doesn't wobble, it looks like the basic design in the article has features to make it sturdy. I am thinking about the backboard and the monitor shelf. I actually think it will be harder to avoid the top sagging. Soren Madsen
"When you don't know what you're doing it's best to do it quickly" - Jase #DuckDynasty
Depends on the length, the weight you put on it, and the "wood" you use for the shelf. Thicker == less sag for a given distance, obviously... :laugh: If you are worried, then bracing in the middle can help a lot - but look at your bookshelves. Books weigh a lot, and if your shelves don't sag under that weight... Don't forget that the edges of plywood look horrible (and tend to be very "splintery") so you may need some iron-on veneer edging strips to tidy it up. It's also worth running a router with a rounding bit over the edges to easy pressure on your arms when leaning on it, and to round the corners off. Our bed has "slightly" rounded corners on the foot posts, and the number of nasty bruises I have picked up from walking past incautiously is silly! :laugh:
-
Depends on the length, the weight you put on it, and the "wood" you use for the shelf. Thicker == less sag for a given distance, obviously... :laugh: If you are worried, then bracing in the middle can help a lot - but look at your bookshelves. Books weigh a lot, and if your shelves don't sag under that weight... Don't forget that the edges of plywood look horrible (and tend to be very "splintery") so you may need some iron-on veneer edging strips to tidy it up. It's also worth running a router with a rounding bit over the edges to easy pressure on your arms when leaning on it, and to round the corners off. Our bed has "slightly" rounded corners on the foot posts, and the number of nasty bruises I have picked up from walking past incautiously is silly! :laugh:
Hmmm, you are pecking away at my worst fears, the finishing on the edges. I was kind of hoping that applying stain and sealer would make it smooth enough. Yeah, I was also thinking I have to smooth out all corners and edges. I rounded off the corners on the bedposts years ago. Those things were so sharp they drew blood on my legs a couple of times. :^) Soren Madsen
"When you don't know what you're doing it's best to do it quickly" - Jase #DuckDynasty
-
Hmmm, you are pecking away at my worst fears, the finishing on the edges. I was kind of hoping that applying stain and sealer would make it smooth enough. Yeah, I was also thinking I have to smooth out all corners and edges. I rounded off the corners on the bedposts years ago. Those things were so sharp they drew blood on my legs a couple of times. :^) Soren Madsen
"When you don't know what you're doing it's best to do it quickly" - Jase #DuckDynasty
:wince: Wakes you up doesn't it?
-
:wince: Wakes you up doesn't it?
:laugh: Yes. It's funny now, but not so much when you are rolling around, clutching your leg trying to decide if you should cry or wet yourself while looking at the open flesh wound that is still white and for some reason not bleeding yet. :sigh: Soren Madsen
"When you don't know what you're doing it's best to do it quickly" - Jase #DuckDynasty
-
:laugh: Yes. It's funny now, but not so much when you are rolling around, clutching your leg trying to decide if you should cry or wet yourself while looking at the open flesh wound that is still white and for some reason not bleeding yet. :sigh: Soren Madsen
"When you don't know what you're doing it's best to do it quickly" - Jase #DuckDynasty
...and you still need to pee! :laugh: (And if you are like me, you get the other leg going back to bed... :sigh: )
-
...and you still need to pee! :laugh: (And if you are like me, you get the other leg going back to bed... :sigh: )
OriginalGriff wrote:
(And if you are like me, you get the other leg going back to bed... :sigh: )
Or simply stub your toe on the post. But not the big one. No, no, one that will really bring out the pain. :^) Soren Madsen
"When you don't know what you're doing it's best to do it quickly" - Jase #DuckDynasty
-
I guess it's Do It Yourself weekend here in the Lounge :) . I have decided to build my own desk for my home office. The thing I have now is a cheaper, flimsier and suckier version of this[^]. I have had it for 12 years and it is time to get rid of it, especially since I am currently working on something where I need at least one more computer right next to my main system. I found this web site[^] (jump to the finished product[^]) and I like a couple of things about her approach: 1) Most of it can be laid out on a sheet of plywood that you have them cut out at the lumber yard. 2) The height of the desk is the height of a standard keyboard tray, so you don't have to fight with that (I really hate my keyboard tray). I actually want to expand this into an L-shaped desk, where the other part is the height of a standard desk. I think I can figure out how to do it, but I am still in the planning stages. Any tips or ideas? Soren Madsen
"When you don't know what you're doing it's best to do it quickly" - Jase #DuckDynasty
don't. go to a store and by 4 legs and a top and it will be better than that, especially if you are not used into building stuff.
I'd rather be phishing!
-
I guess it's Do It Yourself weekend here in the Lounge :) . I have decided to build my own desk for my home office. The thing I have now is a cheaper, flimsier and suckier version of this[^]. I have had it for 12 years and it is time to get rid of it, especially since I am currently working on something where I need at least one more computer right next to my main system. I found this web site[^] (jump to the finished product[^]) and I like a couple of things about her approach: 1) Most of it can be laid out on a sheet of plywood that you have them cut out at the lumber yard. 2) The height of the desk is the height of a standard keyboard tray, so you don't have to fight with that (I really hate my keyboard tray). I actually want to expand this into an L-shaped desk, where the other part is the height of a standard desk. I think I can figure out how to do it, but I am still in the planning stages. Any tips or ideas? Soren Madsen
"When you don't know what you're doing it's best to do it quickly" - Jase #DuckDynasty
-
I guess it's Do It Yourself weekend here in the Lounge :) . I have decided to build my own desk for my home office. The thing I have now is a cheaper, flimsier and suckier version of this[^]. I have had it for 12 years and it is time to get rid of it, especially since I am currently working on something where I need at least one more computer right next to my main system. I found this web site[^] (jump to the finished product[^]) and I like a couple of things about her approach: 1) Most of it can be laid out on a sheet of plywood that you have them cut out at the lumber yard. 2) The height of the desk is the height of a standard keyboard tray, so you don't have to fight with that (I really hate my keyboard tray). I actually want to expand this into an L-shaped desk, where the other part is the height of a standard desk. I think I can figure out how to do it, but I am still in the planning stages. Any tips or ideas? Soren Madsen
"When you don't know what you're doing it's best to do it quickly" - Jase #DuckDynasty
-
Get a couple of filing cabinets and a decent length of laminate countertop. If you want an L shape, just use two with 45 degree endcuts. You can always build extra shelving for the top if you need it. :)
"Go forth into the source" - Neal Morse
-
I guess it's Do It Yourself weekend here in the Lounge :) . I have decided to build my own desk for my home office. The thing I have now is a cheaper, flimsier and suckier version of this[^]. I have had it for 12 years and it is time to get rid of it, especially since I am currently working on something where I need at least one more computer right next to my main system. I found this web site[^] (jump to the finished product[^]) and I like a couple of things about her approach: 1) Most of it can be laid out on a sheet of plywood that you have them cut out at the lumber yard. 2) The height of the desk is the height of a standard keyboard tray, so you don't have to fight with that (I really hate my keyboard tray). I actually want to expand this into an L-shaped desk, where the other part is the height of a standard desk. I think I can figure out how to do it, but I am still in the planning stages. Any tips or ideas? Soren Madsen
"When you don't know what you're doing it's best to do it quickly" - Jase #DuckDynasty
My home "office" is 10x10. Oddly enough, Lowe's has 10' long faux marble kitchen counters, precut to fit together in an L. Plenty of room to fit my systems, their monitors, the near-field monitors, the printer, the scanner, the ridiculously bulky video monitor, and the two cats. Real Soon Now™.
-
I guess it's Do It Yourself weekend here in the Lounge :) . I have decided to build my own desk for my home office. The thing I have now is a cheaper, flimsier and suckier version of this[^]. I have had it for 12 years and it is time to get rid of it, especially since I am currently working on something where I need at least one more computer right next to my main system. I found this web site[^] (jump to the finished product[^]) and I like a couple of things about her approach: 1) Most of it can be laid out on a sheet of plywood that you have them cut out at the lumber yard. 2) The height of the desk is the height of a standard keyboard tray, so you don't have to fight with that (I really hate my keyboard tray). I actually want to expand this into an L-shaped desk, where the other part is the height of a standard desk. I think I can figure out how to do it, but I am still in the planning stages. Any tips or ideas? Soren Madsen
"When you don't know what you're doing it's best to do it quickly" - Jase #DuckDynasty
-
-
:thumbsup: That's pretty nice, thanks for sharing. What wood did you use for the top? Soren Madsen
"When you don't know what you're doing it's best to do it quickly" - Jase #DuckDynasty
I made the whole thing out of MDF, and used yacht varnish to get a rich, heavy finish. Note that if you build the desk in as part of the room, the missus can't keep making you move it.
I wanna be a eunuchs developer! Pass me a bread knife!
-
What kind of plywood did you use or do you not care about the appearance? Soren Madsen
"When you don't know what you're doing it's best to do it quickly" - Jase #DuckDynasty
SoMad wrote:
What kind of plywood did you use...
"Furniture Grade" plywood works best for a project like this. (It doesn't have any voids in the layers which makes it stronger, less prone to warping, and the edges(although clearly plywood) can be finished without them getting ragged.) An alternative is to buy a counter-top (cut to size... anything from marble to cheap plywood with a veneer.). If you own your home and don't plan on moving soon, you may consider building the desk into a wall. Simple 2x4 frame attached at the right height. (remember to use a level, not strictly the height from the floor) Use either table legs with adjustable feet (available pre-made, just attach) or support the top with 2x4 braces that run from near the edge to the wall. This can look like almost anything depending on the materials used. Nice, functional, classy, hillbilly.
-
I made the whole thing out of MDF, and used yacht varnish to get a rich, heavy finish. Note that if you build the desk in as part of the room, the missus can't keep making you move it.
I wanna be a eunuchs developer! Pass me a bread knife!
Thanks, you did get it quite shiny with that varnish :). I am considering using MDF, but I am also considering using edge-glued boards since they are not as prone to splinters and edge-chipping as plywood. The problem is that I cannot find a pre-made board with the dimensions I would like (56" x 30"). Soren Madsen
"When you don't know what you're doing it's best to do it quickly" - Jase #DuckDynasty
-
Well, I have some tools and some experience, but I am not looking for something super nice. I need a desk upgrade right now and I definitely have to go with an inexpensive solution.
Mike Hankey wrote:
As far as them cutting it for you at the lumber yard they usually limit the amount of cuts
I think Home Depot will make two cuts. I assume they they just charge a bit per extra cut, but maybe I am wrong. Soren Madsen
"When you don't know what you're doing it's best to do it quickly" - Jase #DuckDynasty
Yeah, my experience has been that the first two cuts are free. If you can find someone to do it. And they don't guarantee accuracy. It may be that a woman will get better service.
-
Thanks, you did get it quite shiny with that varnish :). I am considering using MDF, but I am also considering using edge-glued boards since they are not as prone to splinters and edge-chipping as plywood. The problem is that I cannot find a pre-made board with the dimensions I would like (56" x 30"). Soren Madsen
"When you don't know what you're doing it's best to do it quickly" - Jase #DuckDynasty
SoMad wrote:
The problem is that I cannot find a pre-made board with the dimensions I would like (56" x 30")
Get yourself a cheap biscuit cutter[^], and you can join two pieces -- my desk was joined just where the drawers end (designed to be separated, later, which it now has been). If you make sure that the joining edges are dead straight*, no-one will ever know you've added a bit. n.b. If you do go for joined-edge panels, pick ones that don't have big colour differences in the batons, or the stripes'll piss you off when you're sitting at it. * Use a jointing block: spray- or contact-glue 100-grit sandpaper to both sides of a 4x9" MDF-or-similar offcut, and rub the full length of the board in a single movement, several times -- it doesn't take a lot of practice, and works miraculously well.
I wanna be a eunuchs developer! Pass me a bread knife!
Ow~~_32-260x260-0-0.JPG){kind=link}
