Anyone using a standing desk?
-
If so, any recommendations?
>64 If you can keep your head while those about you are losing theirs, perhaps you don't understand the situation.
Me, I like this. Never really cared about the upper level :)
Mircea
-
If so, any recommendations?
>64 If you can keep your head while those about you are losing theirs, perhaps you don't understand the situation.
I only have an astounding desks.:~
CI/CD = Continuous Impediment/Continuous Despair
-
If so, any recommendations?
>64 If you can keep your head while those about you are losing theirs, perhaps you don't understand the situation.
A few boxes on top of an existing desk. Low cost, and you can use that to decide if it's for you. (Also, I highly recommend doing it in short segments throughout the day. Switching to just standing is a recipe for discomfort.)
TTFN - Kent
-
If so, any recommendations?
>64 If you can keep your head while those about you are losing theirs, perhaps you don't understand the situation.
theoldfool wrote:
any recommendations?
A comfortable chair.
-
If so, any recommendations?
>64 If you can keep your head while those about you are losing theirs, perhaps you don't understand the situation.
As usual, wisdom from this group has been enlightening, if not helpful. I am going to review it all mixing in a 6-pack of my favorite beverage. Thanks all. :wtf:
>64 If you can keep your head while those about you are losing theirs, perhaps you don't understand the situation.
-
Me, I like this. Never really cared about the upper level :)
Mircea
Now that's my kind of work station!
The less you need, the more you have. Even a blind squirrel gets a nut...occasionally. JaxCoder.com
-
If so, any recommendations?
>64 If you can keep your head while those about you are losing theirs, perhaps you don't understand the situation.
Everyone at our work has motorised standing desks. They good even if you don’t use the standing function very often. I have set the heights so that in the standing position I can fit the chair under the desk. The big advantage for the IT support people is they can easily raise the desk for easy cabling underneath.
A Fine is a Tax for doing something wrong A Tax is a Fine for doing something good.
-
If so, any recommendations?
>64 If you can keep your head while those about you are losing theirs, perhaps you don't understand the situation.
Finally a serious suggestion, take a look at Slant best-standing-desks[^] :-\
-
If so, any recommendations?
>64 If you can keep your head while those about you are losing theirs, perhaps you don't understand the situation.
-
Finally a serious suggestion, take a look at Slant best-standing-desks[^] :-\
Thank you, some I hadn't seen. I am amazed at the price range of those things.
>64 If you can keep your head while those about you are losing theirs, perhaps you don't understand the situation.
-
A few boxes on top of an existing desk. Low cost, and you can use that to decide if it's for you. (Also, I highly recommend doing it in short segments throughout the day. Switching to just standing is a recipe for discomfort.)
TTFN - Kent
Thanks, good thought, current layout prevents doing that.
>64 If you can keep your head while those about you are losing theirs, perhaps you don't understand the situation.
-
Thanks, looked at some mats yesterday. Good suggestion.
>64 If you can keep your head while those about you are losing theirs, perhaps you don't understand the situation.
-
If so, any recommendations?
>64 If you can keep your head while those about you are losing theirs, perhaps you don't understand the situation.
I can't stand using a desk ;p Seriously though, this may sound obvious, but get one that's high enough for you. I worked for a company that standardized on desks that were just too low for the majority of the (Dutch) men working there. With 1.80m (below average over here :( ) it was doable for me, but I could've used a few more cm. So pay a bit more for extra height, I guess.
Best, Sander Azure DevOps Succinctly (free eBook) Azure Serverless Succinctly (free eBook) Migrating Apps to the Cloud with Azure arrgh.js - Bringing LINQ to JavaScript
-
Me, I like this. Never really cared about the upper level :)
Mircea
With the mess of cables and UPSes and computers standing on the floor under my desk, I wouldn't see that as practical in my case. Besides...with a desk as the one pictured, I could absolutely see myself tilting the whole thing over when I'd want to get up and have it all come crashing down to the floor.
-
Now that's my kind of work station!
The less you need, the more you have. Even a blind squirrel gets a nut...occasionally. JaxCoder.com
A train station is where the train stops... A bus stations is where the bus stops... A work station is ... :laugh:
"The only place where Success comes before Work is in the dictionary." Vidal Sassoon, 1928 - 2012
-
A train station is where the train stops... A bus stations is where the bus stops... A work station is ... :laugh:
"The only place where Success comes before Work is in the dictionary." Vidal Sassoon, 1928 - 2012
I do my best work in a hammock. The answers come on the inside of my eyelids.
The less you need, the more you have. Even a blind squirrel gets a nut...occasionally. JaxCoder.com
-
I can't stand using a desk ;p Seriously though, this may sound obvious, but get one that's high enough for you. I worked for a company that standardized on desks that were just too low for the majority of the (Dutch) men working there. With 1.80m (below average over here :( ) it was doable for me, but I could've used a few more cm. So pay a bit more for extra height, I guess.
Best, Sander Azure DevOps Succinctly (free eBook) Azure Serverless Succinctly (free eBook) Migrating Apps to the Cloud with Azure arrgh.js - Bringing LINQ to JavaScript
Thanks. I am 1.8m as well. I don't speak meters so had to duckduckgo it. :)
>64 If you can keep your head while those about you are losing theirs, perhaps you don't understand the situation.
-
If so, any recommendations?
>64 If you can keep your head while those about you are losing theirs, perhaps you don't understand the situation.
I own a Steelcase Ology[^]. I bought it for two reasons: 1. Being able to adjust the low position and use the desk much more comfortably while seating. 2. In really long days, when your neck and back start to ask you to stop working, you can always change the position and then work a little while on foot. In my experience this is not something that you will use every day, but it's nice to have it, the best of it: being able to adjust the sitting position to fit your body perfectly. Recommendations: 1. Get something with square guides to reduce wobbling. 2. The stiffer the better. 3. Test it before buying if you can (Steelcase has showrooms, I am sure other brands will have them too), it's easier to feel if it is for you or not than with chairs. 4. When testing it try to make it wobble, this is the weak point of those desks, and ensure you will be able to work comfortably with that (this wobbling happens when the desk it's elevated). 5. Get something with encoder and memory, you don't really want to "find" the right position every time. Store it and press a button to get there. 6. A good under desktop cable managing system (the bigger the better, always). 7. Holes in each side and one lid in the middle to manage the cables. 8. Ensure the desktop will be big enough. Standing position: It's comfortable, but, after a while your feet will kill you, so, ensure you have proper and comfortable shoes or get a shaped mat to be able to work like that for longer period of times (I don't have one). I guess the more recognized brands will be the best ones, I tested IKEA, ACTIU and a couple of brands more before going for Steelcase, and it was much better than anything else I tried. Would have tested Herman Miller too but they did not had a showroom at Barcelona (Spain) at that time. Check the noise, mine is super silent, but anything with motors will make some noise... ensure your neighbor won't wish to kill you every time you move that up and down. Hope this helps. :thumbsup:
www.robotecnik.com[^] - robots, CNC and PLC programming
-
I own a Steelcase Ology[^]. I bought it for two reasons: 1. Being able to adjust the low position and use the desk much more comfortably while seating. 2. In really long days, when your neck and back start to ask you to stop working, you can always change the position and then work a little while on foot. In my experience this is not something that you will use every day, but it's nice to have it, the best of it: being able to adjust the sitting position to fit your body perfectly. Recommendations: 1. Get something with square guides to reduce wobbling. 2. The stiffer the better. 3. Test it before buying if you can (Steelcase has showrooms, I am sure other brands will have them too), it's easier to feel if it is for you or not than with chairs. 4. When testing it try to make it wobble, this is the weak point of those desks, and ensure you will be able to work comfortably with that (this wobbling happens when the desk it's elevated). 5. Get something with encoder and memory, you don't really want to "find" the right position every time. Store it and press a button to get there. 6. A good under desktop cable managing system (the bigger the better, always). 7. Holes in each side and one lid in the middle to manage the cables. 8. Ensure the desktop will be big enough. Standing position: It's comfortable, but, after a while your feet will kill you, so, ensure you have proper and comfortable shoes or get a shaped mat to be able to work like that for longer period of times (I don't have one). I guess the more recognized brands will be the best ones, I tested IKEA, ACTIU and a couple of brands more before going for Steelcase, and it was much better than anything else I tried. Would have tested Herman Miller too but they did not had a showroom at Barcelona (Spain) at that time. Check the noise, mine is super silent, but anything with motors will make some noise... ensure your neighbor won't wish to kill you every time you move that up and down. Hope this helps. :thumbsup:
www.robotecnik.com[^] - robots, CNC and PLC programming
Thanks for all the details.
>64 If you can keep your head while those about you are losing theirs, perhaps you don't understand the situation.
-
If so, any recommendations?
>64 If you can keep your head while those about you are losing theirs, perhaps you don't understand the situation.
The SKARSTA white, Desk sit/stand, 160x80 cm - IKEA[^] has worked for me - it goes high enough to act as low, medium and 'standing' heights. They are a good price. I hang the PC's Tower case below the desk, using a cheap (pound store) tension strap and plywood base that has a stabilising clamp (Jubilee) to the side leg. I also picked up one of their swivel chairs to help with the back ache/posture (which is usually why a standing desk works well).
