What's the worst computer chassis hack you've done?
-
I've seen a computer run out of a pizza box (on the Internet anyway) - just the mobo and drive and stuff sitting in a greasy box. When I was young I put a 286 mobo and MFM HDD (remember those?) inside a cabinet with wood screws. Soon I will be propping my PC up on 4 soup cans to give my 1000 watt PSU's fan some clearance to see if that solves my overheat problem when I use 4k rendering. Gotta wait for some adapters for my 2 remaining fans though before I try that. Life goals are the setup from the movie Pi.
To err is human. Fortune favors the monsters.
Holding everything inside with cotton string :-D At the time I couldn't afford a mobile chassis for my work computer (literally a PC I take to work) so I asked in my school for any chassis that they had for recycling. They gave me an old one that was not ATX compatible so I put some rubber feet on the back of the motherboard to avoid shorts, strapped it to the chassis using cotton string, put a smaller heatsink on the CPU (the chassis was thin), strapped the fan to the heatsink with more cotton string, drilled holes in four old CDs to mount the four laptop HDDs (using screws) and strapped that set with some more cotton string to the chassis. Then, because this computer would suffer some vibrations from the travels, I strapped everything with even more cotton string forming a sort of web over the motherboard to prevent anything from moving. To finalize the build, I wanted to add a "No cats allowed" sticker but couldn't get it to stick. The chassis was slippery :doh:
-
Holding everything inside with cotton string :-D At the time I couldn't afford a mobile chassis for my work computer (literally a PC I take to work) so I asked in my school for any chassis that they had for recycling. They gave me an old one that was not ATX compatible so I put some rubber feet on the back of the motherboard to avoid shorts, strapped it to the chassis using cotton string, put a smaller heatsink on the CPU (the chassis was thin), strapped the fan to the heatsink with more cotton string, drilled holes in four old CDs to mount the four laptop HDDs (using screws) and strapped that set with some more cotton string to the chassis. Then, because this computer would suffer some vibrations from the travels, I strapped everything with even more cotton string forming a sort of web over the motherboard to prevent anything from moving. To finalize the build, I wanted to add a "No cats allowed" sticker but couldn't get it to stick. The chassis was slippery :doh:
-
And here's me, looking at my stack of vintage OpenVMS systems. My AlphaServer DS10L is a "blade" server, but I ran the floppy cable and an EISA (?) cable out the back and into an old PC case which contains only the floppy drive, a DVD drive, another HDD, and a power supply to feed them. But it's not actually as big a hack as one might suspect... the AlphaServer and the PC were both made by Compaq, so it's kosher. https://www.codeproject.com/Uploads/Membership/Uploads/2587207/Computers.png[^] https://www.codeproject.com/Uploads/Membership/Uploads/2587207/BADGERback.jpg[^] Because it's a "blade" server, a DS10L has only two drive bays, mine has two HDDs in it. DEC used SCSI for peripherals, but Compaq used EISA :wtf: . The other week someone asked about what we do with old EISA HDDs; this is what I did with mine.
I'm guessing you don't spend a lot of time at that keyboard and monitor or there's a decent yoga mat just off camera.
I’ve given up trying to be calm. However, I am open to feeling slightly less agitated.
-
A and B drive cables, getcha some. WD st-225 perhaps?
I actually had and used a ST-506 drive on my Amiga computer. This was I believe the first commercially available 5MB drive. Was a full height drive too, so took up a lot of space. I remember too, was using it without a chassis, just plugged in with power and ribbon cable snaked out of the case. Sat beside the Amiga 2000 on the desk.
-
I'm guessing you don't spend a lot of time at that keyboard and monitor or there's a decent yoga mat just off camera.
I’ve given up trying to be calm. However, I am open to feeling slightly less agitated.
Sadly, no. The VT220 went "pop" a few years ago. :sigh: I still have the keyboard and hopes of getting another VT of some sort. These days I use Putty to access these systems when I use them (which is rare).
-
And here's me, looking at my stack of vintage OpenVMS systems. My AlphaServer DS10L is a "blade" server, but I ran the floppy cable and an EISA (?) cable out the back and into an old PC case which contains only the floppy drive, a DVD drive, another HDD, and a power supply to feed them. But it's not actually as big a hack as one might suspect... the AlphaServer and the PC were both made by Compaq, so it's kosher. https://www.codeproject.com/Uploads/Membership/Uploads/2587207/Computers.png[^] https://www.codeproject.com/Uploads/Membership/Uploads/2587207/BADGERback.jpg[^] Because it's a "blade" server, a DS10L has only two drive bays, mine has two HDDs in it. DEC used SCSI for peripherals, but Compaq used EISA :wtf: . The other week someone asked about what we do with old EISA HDDs; this is what I did with mine.
PIEBALDconsult wrote:
looking at my stack of vintage
and here I thought you were going to expound on your stash of naughty mags. :laugh: :laugh:
-
PIEBALDconsult wrote:
looking at my stack of vintage
and here I thought you were going to expound on your stash of naughty mags. :laugh: :laugh:
Uh, hmmm... I have only one of those. I have the issue of Playboy from my birth month. :-O It contains Ursula Andress. :-D
-
Holding everything inside with cotton string :-D At the time I couldn't afford a mobile chassis for my work computer (literally a PC I take to work) so I asked in my school for any chassis that they had for recycling. They gave me an old one that was not ATX compatible so I put some rubber feet on the back of the motherboard to avoid shorts, strapped it to the chassis using cotton string, put a smaller heatsink on the CPU (the chassis was thin), strapped the fan to the heatsink with more cotton string, drilled holes in four old CDs to mount the four laptop HDDs (using screws) and strapped that set with some more cotton string to the chassis. Then, because this computer would suffer some vibrations from the travels, I strapped everything with even more cotton string forming a sort of web over the motherboard to prevent anything from moving. To finalize the build, I wanted to add a "No cats allowed" sticker but couldn't get it to stick. The chassis was slippery :doh:
You just reminded me that the HDDs in my MicroVAX are kinda/sorta/vaguely held in place with cable ties, because it didn't include the proper brackets. :wtf:
-
I've seen a computer run out of a pizza box (on the Internet anyway) - just the mobo and drive and stuff sitting in a greasy box. When I was young I put a 286 mobo and MFM HDD (remember those?) inside a cabinet with wood screws. Soon I will be propping my PC up on 4 soup cans to give my 1000 watt PSU's fan some clearance to see if that solves my overheat problem when I use 4k rendering. Gotta wait for some adapters for my 2 remaining fans though before I try that. Life goals are the setup from the movie Pi.
To err is human. Fortune favors the monsters.
Got a desk with drawers on one side, and a box (closet?) on the other one. Box is four drawers high. Mounted a mini-PC motherboard in it. Passive cooling, very silent. The current PC doesn't fit; a monster of a machine built by a gamer. I still miss that old mini-PC though. In terms of performance, it outran many full sized desktops. Remember I said passive cooling? It burnt in a summer three years ago, scorched the desk. I was proud of it, and consider it my "best" machine. The worst, could have burnt down the house.
Bastard Programmer from Hell :suss: "If you just follow the bacon Eddy, wherever it leads you, then you won't have to think about politics." -- Some Bell.
-
I've seen a computer run out of a pizza box (on the Internet anyway) - just the mobo and drive and stuff sitting in a greasy box. When I was young I put a 286 mobo and MFM HDD (remember those?) inside a cabinet with wood screws. Soon I will be propping my PC up on 4 soup cans to give my 1000 watt PSU's fan some clearance to see if that solves my overheat problem when I use 4k rendering. Gotta wait for some adapters for my 2 remaining fans though before I try that. Life goals are the setup from the movie Pi.
To err is human. Fortune favors the monsters.
Back when I was in high school, I had a woodworking class and had spent a considerable amount of time thinking about designing a desk where the desk itself would be the chassis. I never went through with it however (which is probably for the best). The idea I had was that both front legs would essentially be enclosed cabinets with enough room to fit a motherboard and a bunch of peripherals; the back legs would've had power outlets running the full vertical length, essentially acting as extra-long power strips. Holes for fans, sliders for hot-swappable drives with front access...let your imagination run wild. I figured it would've been a heat trap, so it would've had a ton of fans. Which of course means the whole thing would've been noisy. Again...probably a good thing it never progressed any farther than a thought in my mind...
-
I once took apart my box and re-arranged the parts inside my table drawer... It gave me more space and a pinch of satisfaction when realized didn't blew up nothing...
"The only place where Success comes before Work is in the dictionary." Vidal Sassoon, 1928 - 2012
I did similar, but chose a closet. More space to vent heat. A mini-PC with "passive" cooling. It didn't cool enough. Still, I like your idea. I'm gonna try that with my next one.
Bastard Programmer from Hell :suss: "If you just follow the bacon Eddy, wherever it leads you, then you won't have to think about politics." -- Some Bell.
-
Back when I was in high school, I had a woodworking class and had spent a considerable amount of time thinking about designing a desk where the desk itself would be the chassis. I never went through with it however (which is probably for the best). The idea I had was that both front legs would essentially be enclosed cabinets with enough room to fit a motherboard and a bunch of peripherals; the back legs would've had power outlets running the full vertical length, essentially acting as extra-long power strips. Holes for fans, sliders for hot-swappable drives with front access...let your imagination run wild. I figured it would've been a heat trap, so it would've had a ton of fans. Which of course means the whole thing would've been noisy. Again...probably a good thing it never progressed any farther than a thought in my mind...
Yeah, I made that mistake and got scorchmarks in my desk to prove it. You need ventilation and it'll work. No passive cooling if you use anything wood. My worst idea ever :D
Bastard Programmer from Hell :suss: "If you just follow the bacon Eddy, wherever it leads you, then you won't have to think about politics." -- Some Bell.
-
I've seen a computer run out of a pizza box (on the Internet anyway) - just the mobo and drive and stuff sitting in a greasy box. When I was young I put a 286 mobo and MFM HDD (remember those?) inside a cabinet with wood screws. Soon I will be propping my PC up on 4 soup cans to give my 1000 watt PSU's fan some clearance to see if that solves my overheat problem when I use 4k rendering. Gotta wait for some adapters for my 2 remaining fans though before I try that. Life goals are the setup from the movie Pi.
To err is human. Fortune favors the monsters.
Just the other day I was told of a friend's mishap: the power supply in his chassis was a bit bigger than expected and the motherboard wouldn't fit. He cut a corner of the motherboard to make it fit.
Quote:
Don't force it, get a bigger hammer. Arthur Bloch
Mircea
-
You just reminded me that the HDDs in my MicroVAX are kinda/sorta/vaguely held in place with cable ties, because it didn't include the proper brackets. :wtf:
I prefer the cotton string because it does not propagate vibrations as much as cable ties if the HDD is hanging in the air. The down side is that it deteriorates a lot faster. Vibrations were the reason I used four laptop HDDs in RAID instead of a single desktop HDD. Obviously, the situation I described was temporary and after some time I bought a proper chassis. But, if it works in your case and the HDDs are not shutting down/parking heads/becoming corrupted you can let it be. Anyway, I would recommend that you buy the brackets if you can and, if they are made of metal, they will help dissipate the heat from the HDDs. The HDDs will be healthier and live longer.
-
That is a little awkward to turn into a computer chassis :doh: . And looks oversized. I bet they would charge me an extra ticket to carry that on a public transport :sigh: . If instead you are referring to trashing the computer, it was brand new. I just could not afford a mobile chassis. The cheapest one at the time was a few thousand euros. Looking at your signature, if your are just reacting to my cat sticker, it was just a joke because of all the string inside the chassis :laugh: . I love cats :-D .
-
I've seen a computer run out of a pizza box (on the Internet anyway) - just the mobo and drive and stuff sitting in a greasy box. When I was young I put a 286 mobo and MFM HDD (remember those?) inside a cabinet with wood screws. Soon I will be propping my PC up on 4 soup cans to give my 1000 watt PSU's fan some clearance to see if that solves my overheat problem when I use 4k rendering. Gotta wait for some adapters for my 2 remaining fans though before I try that. Life goals are the setup from the movie Pi.
To err is human. Fortune favors the monsters.
honey the codewitch wrote:
When I was young I put a 286 mobo and MFM HDD (remember those?) inside a cabinet with wood screws.
I put a Commodore PET in a wooden box once. Not sure why, it was rather flimsy. Also, I used to work on various ROM "extensions" for the PET, so I had this PCB where I plugged in the ROM's and wired up two external multi-position switches for the $A000 and $B000 (or something like that) ROM select lines.
Latest Articles:
ASP.NET Core Web API: Plugin Controllers and Services -
Got a desk with drawers on one side, and a box (closet?) on the other one. Box is four drawers high. Mounted a mini-PC motherboard in it. Passive cooling, very silent. The current PC doesn't fit; a monster of a machine built by a gamer. I still miss that old mini-PC though. In terms of performance, it outran many full sized desktops. Remember I said passive cooling? It burnt in a summer three years ago, scorched the desk. I was proud of it, and consider it my "best" machine. The worst, could have burnt down the house.
Bastard Programmer from Hell :suss: "If you just follow the bacon Eddy, wherever it leads you, then you won't have to think about politics." -- Some Bell.
There are desks like that although most have the computer under a glass on the top and are made of metal. Search "computer desk case" and you may find something. Passive cooling anything needs to be in a place that is naturally well ventilated, preferably with a very small draft (imperceptible by humans). That is the little information that manufacturers held back or most people would not buy them. If it is not in a naturally well ventilated place, it will eventually burn. In the best case scenario it just stops working.
-
There are desks like that although most have the computer under a glass on the top and are made of metal. Search "computer desk case" and you may find something. Passive cooling anything needs to be in a place that is naturally well ventilated, preferably with a very small draft (imperceptible by humans). That is the little information that manufacturers held back or most people would not buy them. If it is not in a naturally well ventilated place, it will eventually burn. In the best case scenario it just stops working.
-
I prefer the cotton string because it does not propagate vibrations as much as cable ties if the HDD is hanging in the air. The down side is that it deteriorates a lot faster. Vibrations were the reason I used four laptop HDDs in RAID instead of a single desktop HDD. Obviously, the situation I described was temporary and after some time I bought a proper chassis. But, if it works in your case and the HDDs are not shutting down/parking heads/becoming corrupted you can let it be. Anyway, I would recommend that you buy the brackets if you can and, if they are made of metal, they will help dissipate the heat from the HDDs. The HDDs will be healthier and live longer.
ElectronProgrammer wrote:
buy the brackets
Yeah, I'll get right on that. :-D This is an early-80s system, getting drives (narrow SCSI?) is difficult enough. I did check Ebay a few years ago. I should check a again, but I would likely need to buy another entire system. https://www.codeproject.com/Uploads/Membership/Uploads/2587207/ermine.png[^]
-
ElectronProgrammer wrote:
buy the brackets
Yeah, I'll get right on that. :-D This is an early-80s system, getting drives (narrow SCSI?) is difficult enough. I did check Ebay a few years ago. I should check a again, but I would likely need to buy another entire system. https://www.codeproject.com/Uploads/Membership/Uploads/2587207/ermine.png[^]
I know the felling. My favorite computer that I have is a Compaq Contura Aero 4/25 and I used it so much the display melted (4bit gray scale 640x480). Can not find a compatible replacement anywhere :(( Only once I saw a used display from a dead Contura but they wanted 400€ :wtf: Nice computer you got there, by the way :-D
