A Walk Through Hades
-
True. Some folks just argue for the sake of it. Not team players for sure. Tiresome and not constructive.
"A little time, a little trouble, your better day" Badfinger
-
Clearly, being as argumentative as you are… you feel the need to get the last word. Fine, you can have it. Just leave me alone. I tire of this childish behavior.
Jeremy Falcon
Boy, you are one silly intemperate person!
-
Boy, you are one silly intemperate person!
For one, I don't care what you think. For two, don't judge me based on your out of context conclusion. For three, if you actually were neutral and opted to lean on intellectual observations of this thread, you'll see I was right in all my points. Instead, you feel the need to demonstrate your bias to help you feel better like you're a savior or something. You're not. So, to put it simply, if you're going to be "that type" who loves to argue then leave me alone as well. You are not worth my time with this low level of discourse. If CP had a blocking feature, I'd block you too. I deseve peace, not the antics of argumentative people with nothing better to do.
Jeremy Falcon
-
BTW I don't think Honey argues for the sake of it. She is intense and drills pretty deep. Passionate about her work. I learn a lot from CP. EOS
"A little time, a little trouble, your better day" Badfinger
jmaida wrote:
BTW I don't think Honey argues for the sake of it.
Honey doesn't even fully read my posts or bother to understand it before disagreeing. Honey can dish the heat but cannot take it. I have no time for that. I've asked for the bad apples to just leave me alone. They can't even do that. Just goes to show how little they actually read the posts they argue on. So, we're just gonna have to disagree on this buddy. :) And that's ok. I should just be able to block people that are nothing but trouble and arguments and go on with my life. But, I can't.
Jeremy Falcon
-
English question from a non native here...
Jeremy Falcon wrote:
Anywho
Anywho? Or Anyhow?
M.D.V. ;) If something has a solution... Why do we have to worry about?. If it has no solution... For what reason do we have to worry about? Help me to understand what I'm saying, and I'll explain it better to you Rating helpful answers is nice, but saying thanks can be even nicer.
The question was already answered, but yeah it's just me being silly _trying_ to keep this chat somewhat lighthearted. Not successfully though. :laugh:
Jeremy Falcon
-
Well, my new PC sure looks pretty, but it doesn't do anything. I've tried about 67 times to install Windows 11 and nothing works. It took a while to work out the compatibility issues, but the BIOS configuration was right a few days ago. Now it will boot into the Win11 Setup program, but it won't get past the point where it's at the 4 - 5% spot of "Preparing files for installation." It crashes with the error: "0x80070570" which happens to mean anything Microsoft wants it to mean. I thought it might be a defective DVD media, but after more than 20 attempts to get that to work, I tried the download approach to make a bootable USB Drive. That causes the same error, at the same point in the setup process. I'm at wit's end with this POS. I've assembled a lot of PC's in the past 30 years, for myself and for others. I've never experienced a single glitch, as everything has always gone perfectly smoothly. But I've never used an ASUS motherboard. I will never do so again.
Will Rogers never met me.
Have you tried resetting the CMOS RAM? I had a system a few years ago that had similar issues. All the BIOS setting appeared to be correct but the system couldn't complete a Windows install. I reset the CMOS RAM and then adjusted the settings and it started to work correctly.
-
I read the part where you said don't expect a reply from you. As you replied twice.
Check out my IoT graphics library here: https://honeythecodewitch/gfx
You are in trouble now! You are on his naughty list. As am I. Presumably because you disagree with him along with providing objective detail as to why. And man he doesn't like that. And his response is that you should never ever comment on his replies. He probably doesn't understand how free speech works.
-
Have you tried resetting the CMOS RAM? I had a system a few years ago that had similar issues. All the BIOS setting appeared to be correct but the system couldn't complete a Windows install. I reset the CMOS RAM and then adjusted the settings and it started to work correctly.
Yes, that was the first thing I tried. But now I'm wondering if I have too little capacity on the PSU. The recommended power from the vendor was 650W, I bought a 750W unit. But this processor and the video card can get greedy. Perhaps a 1000W would be a better choice.
Will Rogers never met me.
-
Try disconnecting everything that's not 100% necessary. Only keep the boot media (you mentioned it's on DVD?), the mouse, keyboard and monitor. Disconnect every other physical wire, including LAN. If prompted during install, skip Wifi setup. This worked for me the few times I've seen this sort of thing happen. Once the OS is up, I reconnected everything, one device at a time, and let the OS detect it/install the drivers as/if needed.
A good plan! I'll give it a try. I think I'll try easter-egging the RAM, as well, removing half of it at a time and rebooting. If there's a memory problem, that should help to isolate it.
Will Rogers never met me.
-
It's possible, Richard, but I've no reliable way to test it. The motherboard BIOS setup includes MEMTEST86, but the results are inconclusive. It bails out and fails while running, but the summary results say PASS: 100%. Go figure. There are other memory test utilities out there, but they all assume an operating system is there to execute them. I do have a fresh copy of Ubuntu that I can try, I guess.
Will Rogers never met me.
There is many ways to check, you can use the Windows Memory Test [Point 9 here](https://www.digitalcitizen.life/start-the-windows-memory-diagnostic/) , you can make your own bootable memtest86+ stick (download UEFI or MBR boot): [MemTest86 - Download now!](https://www.memtest86.com/download.htm), or use [Hiren's BootCD 15.2 Download | TechSpot](https://www.techspot.com/downloads/6966-hirens-bootcd.html). Maybe checking that the RAM runs on the specs in the motherboard helps, my Kingston Fury RAMs did not start with the last two AMD boards (Asus, Asrock), had to manually set the frequency (lucky me, nothing beyond that). It was auto-recognized as a much slower RAM with different timing.
-
It's possible, Richard, but I've no reliable way to test it. The motherboard BIOS setup includes MEMTEST86, but the results are inconclusive. It bails out and fails while running, but the summary results say PASS: 100%. Go figure. There are other memory test utilities out there, but they all assume an operating system is there to execute them. I do have a fresh copy of Ubuntu that I can try, I guess.
Will Rogers never met me.
Was going to say I never had anything like this. Well, but failure to start into Windows (must have been 7 at the time) I had once and it was cured after noticing the memory modules were not clearly endorsed, or rather, I could not get anyone to say that they had a working config same as mine. So I changed the memory, which had practically be given to me, hated to spend money on an uncertain thing, but then it worked ok. And yes, it was an ASUS mobo, like all others I worked with. Afaik/reputation-wise Asus has good builds but documentation is not of same level.
-
jmaida wrote:
BTW I don't think Honey argues for the sake of it.
Honey doesn't even fully read my posts or bother to understand it before disagreeing. Honey can dish the heat but cannot take it. I have no time for that. I've asked for the bad apples to just leave me alone. They can't even do that. Just goes to show how little they actually read the posts they argue on. So, we're just gonna have to disagree on this buddy. :) And that's ok. I should just be able to block people that are nothing but trouble and arguments and go on with my life. But, I can't.
Jeremy Falcon
-
There is many ways to check, you can use the Windows Memory Test [Point 9 here](https://www.digitalcitizen.life/start-the-windows-memory-diagnostic/) , you can make your own bootable memtest86+ stick (download UEFI or MBR boot): [MemTest86 - Download now!](https://www.memtest86.com/download.htm), or use [Hiren's BootCD 15.2 Download | TechSpot](https://www.techspot.com/downloads/6966-hirens-bootcd.html). Maybe checking that the RAM runs on the specs in the motherboard helps, my Kingston Fury RAMs did not start with the last two AMD boards (Asus, Asrock), had to manually set the frequency (lucky me, nothing beyond that). It was auto-recognized as a much slower RAM with different timing.
The MemTest86 UEFI boot stick did the trick. I've isolated it to one pair of memory sticks, but can't sort it out beyond that. Sadly, since I've never had a failure before, I didn't keep the original packaging, so I can't return those two. Oh well, I suppose 32 GB will do for now. Thanks for the tip!
Will Rogers never met me.
-
The question was already answered, but yeah it's just me being silly _trying_ to keep this chat somewhat lighthearted. Not successfully though. :laugh:
Jeremy Falcon
Jeremy Falcon wrote:
it's just me being silly trying to keep this chat somewhat lighthearted
Sorry... to be effective has to be understood ;) ;P :-D
M.D.V. ;) If something has a solution... Why do we have to worry about?. If it has no solution... For what reason do we have to worry about? Help me to understand what I'm saying, and I'll explain it better to you Rating helpful answers is nice, but saying thanks can be even nicer.
-
Understood. Not a problem. Your posts, especially the tech stuff, provides me useful info (as do many others on CP).
"A little time, a little trouble, your better day" Badfinger
Thanks man.
Jeremy Falcon
-
Jeremy Falcon wrote:
it's just me being silly trying to keep this chat somewhat lighthearted
Sorry... to be effective has to be understood ;) ;P :-D
M.D.V. ;) If something has a solution... Why do we have to worry about?. If it has no solution... For what reason do we have to worry about? Help me to understand what I'm saying, and I'll explain it better to you Rating helpful answers is nice, but saying thanks can be even nicer.
I’m on mobile so can’t easily toss out an emoji response. So, I’ll just say…. Daaaaaayyyyyyyyuuuuuummmm lol
Jeremy Falcon
-
A good plan! I'll give it a try. I think I'll try easter-egging the RAM, as well, removing half of it at a time and rebooting. If there's a memory problem, that should help to isolate it.
Will Rogers never met me.
-
Yes, that was the first thing I tried. But now I'm wondering if I have too little capacity on the PSU. The recommended power from the vendor was 650W, I bought a 750W unit. But this processor and the video card can get greedy. Perhaps a 1000W would be a better choice.
Will Rogers never met me.
-
Yep, I've done that too. A memory tester might also help (memtestx86? whatever its name is...) If you don't mind, post a follow-up - I'd be genuinely curious to know if/how you got this resolved.
Having removed half the RAM, it now runs MemTest86 with no errors through multiple passes, and Windows 11 installed without a glitch. Well, almost. At the point where Setup wants to check for updates, it doesn't recognize the built in WiFi adapter on this MB. So I spent an hour or so rummaging around storage to find a 100' Cat5 cable to reach the router. Once Setup was done, an ASUS program kicked in and downloaded drivers for the MB. After that, the WiFi adapter was recognized and usable. So, all is good for now, and the excess RAM will be set aside.
Will Rogers never met me.
-
Having removed half the RAM, it now runs MemTest86 with no errors through multiple passes, and Windows 11 installed without a glitch. Well, almost. At the point where Setup wants to check for updates, it doesn't recognize the built in WiFi adapter on this MB. So I spent an hour or so rummaging around storage to find a 100' Cat5 cable to reach the router. Once Setup was done, an ASUS program kicked in and downloaded drivers for the MB. After that, the WiFi adapter was recognized and usable. So, all is good for now, and the excess RAM will be set aside.
Will Rogers never met me.
Interesting. Have you retried MemTest86 with *only* the suspect stick? Odds are, it'll confirm there's something wrong with it. Or maybe it's not identical to your other one(s), and they have problems running in sync. Either way - good news. At least you found the culprit.