I go down rabbit holes on Wiki following internal combustion tech for some reason.
-
An example are the 2 story tall oil tanker diesel engines that burn crude at like 60RPM, or rotary/Wankel engines and such. Sometimes I think I should have gone into some field where I was building physical things. I mean, I picked up software when I was little because I didn't have an income to keep supporting building frankenbikes and circuits, nor would they let me weld, but I had a computer. I build stuff. It's what I do. I'm a coder of circumstance. Why do you code?
Check out my IoT graphics library here: https://honeythecodewitch.com/gfx And my IoT UI/User Experience library here: https://honeythecodewitch.com/uix
"It's indoor work with no heavy lifting."
"I have no idea what I did, but I'm taking full credit for it." - ThisOldTony "Common sense is so rare these days, it should be classified as a super power" - Random T-shirt AntiTwitter: @DalekDave is now a follower!
-
"It's indoor work with no heavy lifting."
"I have no idea what I did, but I'm taking full credit for it." - ThisOldTony "Common sense is so rare these days, it should be classified as a super power" - Random T-shirt AntiTwitter: @DalekDave is now a follower!
I should have maybe asked "assuming you enjoy coding, why?"
Check out my IoT graphics library here: https://honeythecodewitch.com/gfx And my IoT UI/User Experience library here: https://honeythecodewitch.com/uix
-
An example are the 2 story tall oil tanker diesel engines that burn crude at like 60RPM, or rotary/Wankel engines and such. Sometimes I think I should have gone into some field where I was building physical things. I mean, I picked up software when I was little because I didn't have an income to keep supporting building frankenbikes and circuits, nor would they let me weld, but I had a computer. I build stuff. It's what I do. I'm a coder of circumstance. Why do you code?
Check out my IoT graphics library here: https://honeythecodewitch.com/gfx And my IoT UI/User Experience library here: https://honeythecodewitch.com/uix
Pretty much same as Richard: every time I do something else than coding I thank gods I didn't have to earn a living doing that. Would have been painful for me and those around me :laugh:
Mircea
-
I should have maybe asked "assuming you enjoy coding, why?"
Check out my IoT graphics library here: https://honeythecodewitch.com/gfx And my IoT UI/User Experience library here: https://honeythecodewitch.com/uix
That was genuinely the reason why I started in software: I was ten; I'd never seen a computer, let alone used one; I had no idea at all what was involved in software. And neither did anyone else around me, there was no-one to even ask! The closest my school or public libraries came to books on computers was this: The Computer (Ladybird How It Works Series 654): Amazon.co.uk: Carey Jr., David, Robinson, B.H.: 9780721402864: Books[^] and that wasn't even published until a year after I decided! But I hated being cold and wet, I hated physical effort. So "indoor work with no heavy lifting" really sounded good! It took me another eight years to actually meet a computer - ICL 1900 running George III on punched cards (plus 4 terminals for ~400 students) but I've never looked back. I do still enjoy it!
"I have no idea what I did, but I'm taking full credit for it." - ThisOldTony "Common sense is so rare these days, it should be classified as a super power" - Random T-shirt AntiTwitter: @DalekDave is now a follower!
-
An example are the 2 story tall oil tanker diesel engines that burn crude at like 60RPM, or rotary/Wankel engines and such. Sometimes I think I should have gone into some field where I was building physical things. I mean, I picked up software when I was little because I didn't have an income to keep supporting building frankenbikes and circuits, nor would they let me weld, but I had a computer. I build stuff. It's what I do. I'm a coder of circumstance. Why do you code?
Check out my IoT graphics library here: https://honeythecodewitch.com/gfx And my IoT UI/User Experience library here: https://honeythecodewitch.com/uix
honey the codewitch wrote:
I was building physical things
I am in the embedded automotive world -> This is how I am part of both worlds :-D I did not want to do SW only for web or desktop app - requirements are much more fun to implement when you do not have endless memory and CPU, have to make something move in an expected way and without killing anybody.
-
An example are the 2 story tall oil tanker diesel engines that burn crude at like 60RPM, or rotary/Wankel engines and such. Sometimes I think I should have gone into some field where I was building physical things. I mean, I picked up software when I was little because I didn't have an income to keep supporting building frankenbikes and circuits, nor would they let me weld, but I had a computer. I build stuff. It's what I do. I'm a coder of circumstance. Why do you code?
Check out my IoT graphics library here: https://honeythecodewitch.com/gfx And my IoT UI/User Experience library here: https://honeythecodewitch.com/uix
honey the codewitch wrote:
Why do you code?
Money, white-collared, intellectually challenging at times. And pushing the "Run" button shows the results.
-
An example are the 2 story tall oil tanker diesel engines that burn crude at like 60RPM, or rotary/Wankel engines and such. Sometimes I think I should have gone into some field where I was building physical things. I mean, I picked up software when I was little because I didn't have an income to keep supporting building frankenbikes and circuits, nor would they let me weld, but I had a computer. I build stuff. It's what I do. I'm a coder of circumstance. Why do you code?
Check out my IoT graphics library here: https://honeythecodewitch.com/gfx And my IoT UI/User Experience library here: https://honeythecodewitch.com/uix
I code frankenapps (and my dream when I was an irresponsible teenager, which is actually still my dream as an irresponsible adult, is to have an [RX4 with a bridge-ported 13B rotary](https://www.customaddictions.com.au/glenns-1973-mazda-rx4-coupe.html). One day maybe...)
cheers Chris Maunder
-
honey the codewitch wrote:
I was building physical things
I am in the embedded automotive world -> This is how I am part of both worlds :-D I did not want to do SW only for web or desktop app - requirements are much more fun to implement when you do not have endless memory and CPU, have to make something move in an expected way and without killing anybody.
That's kind of where I am with embedded except I'm focused on the software end, but I at least like that I work with hardware engineers (mechanical and electrical) and that my software touches those things they produce. Even if I'm not making the hardware for work, I enjoy the end result - the physical product.
Check out my IoT graphics library here: https://honeythecodewitch.com/gfx And my IoT UI/User Experience library here: https://honeythecodewitch.com/uix
-
An example are the 2 story tall oil tanker diesel engines that burn crude at like 60RPM, or rotary/Wankel engines and such. Sometimes I think I should have gone into some field where I was building physical things. I mean, I picked up software when I was little because I didn't have an income to keep supporting building frankenbikes and circuits, nor would they let me weld, but I had a computer. I build stuff. It's what I do. I'm a coder of circumstance. Why do you code?
Check out my IoT graphics library here: https://honeythecodewitch.com/gfx And my IoT UI/User Experience library here: https://honeythecodewitch.com/uix
honey the codewitch wrote:
Why do you code?
It's all I've ever known to be passionate about. I actually gave this some thought a while back, and the closest thing that ever came to mind is, if I wasn't coding, maybe I'd be into woodworking. But I've always had an irrational fear of heavy machinery with exposed blades that present plenty of opportunities to lose a finger (or worse). Eliminate these two options...and I honestly don't know what I'd be doing. My dad was an auto mechanic, and his dad before him, but I've never seen myself doing that. And, the job's completely different nowadays than it was at the time my dad retired nearly 20 years ago. He mentioned once or twice I made the right choice... Fortunately one can make a good living doing what I've found to be passionate about. That's a blessing, and I fully realize most people spend their lives being unable to do that. It can also be a curse - mixing work with hobbies, I believe, has the potential to lead you to burn out, and then you end up hating both. Then how do you get out of that rut?
-
honey the codewitch wrote:
Why do you code?
It's all I've ever known to be passionate about. I actually gave this some thought a while back, and the closest thing that ever came to mind is, if I wasn't coding, maybe I'd be into woodworking. But I've always had an irrational fear of heavy machinery with exposed blades that present plenty of opportunities to lose a finger (or worse). Eliminate these two options...and I honestly don't know what I'd be doing. My dad was an auto mechanic, and his dad before him, but I've never seen myself doing that. And, the job's completely different nowadays than it was at the time my dad retired nearly 20 years ago. He mentioned once or twice I made the right choice... Fortunately one can make a good living doing what I've found to be passionate about. That's a blessing, and I fully realize most people spend their lives being unable to do that. It can also be a curse - mixing work with hobbies, I believe, has the potential to lead you to burn out, and then you end up hating both. Then how do you get out of that rut?
So much of this is relatable.
dandy72 wrote:
It's all I've ever known to be passionate about.
Me basically, at least after I found it.
dandy72 wrote:
Eliminate these two options...and I honestly don't know what I'd be doing.
The only thing I'm qualified to do is write code, and consult around that. Heh. Otherwise I'd be asking you if you'd like fries with that post. :laugh:
dandy72 wrote:
My dad was an auto mechanic, and his dad before him
My biological dad was a toolmaker - he crafted tools to do things like stamp sheet metal into various forms. It requires a surprising amount of math. I inherited a lot of his intellectual leanings, but not the math. Definitely his penchant for creating, and probably where I get my interest in metalwork.
dandy72 wrote:
Fortunately one can make a good living doing what I've found to be passionate about. That's a blessing, and I fully realize most people spend their lives being unable to do that.
I can't tell you how many times I've stewed on that, both cheerfully and a little guiltily at times, particularly since sometimes I feel like I didn't "earn" it having never attended uni or even college.
Check out my IoT graphics library here: https://honeythecodewitch.com/gfx And my IoT UI/User Experience library here: https://honeythecodewitch.com/uix
-
That was genuinely the reason why I started in software: I was ten; I'd never seen a computer, let alone used one; I had no idea at all what was involved in software. And neither did anyone else around me, there was no-one to even ask! The closest my school or public libraries came to books on computers was this: The Computer (Ladybird How It Works Series 654): Amazon.co.uk: Carey Jr., David, Robinson, B.H.: 9780721402864: Books[^] and that wasn't even published until a year after I decided! But I hated being cold and wet, I hated physical effort. So "indoor work with no heavy lifting" really sounded good! It took me another eight years to actually meet a computer - ICL 1900 running George III on punched cards (plus 4 terminals for ~400 students) but I've never looked back. I do still enjoy it!
"I have no idea what I did, but I'm taking full credit for it." - ThisOldTony "Common sense is so rare these days, it should be classified as a super power" - Random T-shirt AntiTwitter: @DalekDave is now a follower!
OriginalGriff wrote:
I was ten;
I was eight! *fellow kiddie coder fist bump*
OriginalGriff wrote:
'd never seen a computer, let alone used one; I had no idea at all what was involved in software. And neither did anyone else around me, there was no-one to even ask!
Right? Heck, sometimes I still feel like there's nobody to ask!
OriginalGriff wrote:
The closest my school or public libraries came to books on computers was this
I had the benefit of a small amount of material at public libraries, plus periodicals a little later on like CUJ.
OriginalGriff wrote:
But I hated being cold and wet, I hated physical effort. So "indoor work with no heavy lifting" really sounded good!
SAME! :-D
Check out my IoT graphics library here: https://honeythecodewitch.com/gfx And my IoT UI/User Experience library here: https://honeythecodewitch.com/uix
-
An example are the 2 story tall oil tanker diesel engines that burn crude at like 60RPM, or rotary/Wankel engines and such. Sometimes I think I should have gone into some field where I was building physical things. I mean, I picked up software when I was little because I didn't have an income to keep supporting building frankenbikes and circuits, nor would they let me weld, but I had a computer. I build stuff. It's what I do. I'm a coder of circumstance. Why do you code?
Check out my IoT graphics library here: https://honeythecodewitch.com/gfx And my IoT UI/User Experience library here: https://honeythecodewitch.com/uix
honey the codewitch wrote:
Why do you code?
I'm too lazy to be a farmer, too clever to be a banker, and too honest to be a politician. What else is left?
Freedom is the freedom to say that two plus two make four. If that is granted, all else follows. -- 6079 Smith W.
-
So much of this is relatable.
dandy72 wrote:
It's all I've ever known to be passionate about.
Me basically, at least after I found it.
dandy72 wrote:
Eliminate these two options...and I honestly don't know what I'd be doing.
The only thing I'm qualified to do is write code, and consult around that. Heh. Otherwise I'd be asking you if you'd like fries with that post. :laugh:
dandy72 wrote:
My dad was an auto mechanic, and his dad before him
My biological dad was a toolmaker - he crafted tools to do things like stamp sheet metal into various forms. It requires a surprising amount of math. I inherited a lot of his intellectual leanings, but not the math. Definitely his penchant for creating, and probably where I get my interest in metalwork.
dandy72 wrote:
Fortunately one can make a good living doing what I've found to be passionate about. That's a blessing, and I fully realize most people spend their lives being unable to do that.
I can't tell you how many times I've stewed on that, both cheerfully and a little guiltily at times, particularly since sometimes I feel like I didn't "earn" it having never attended uni or even college.
Check out my IoT graphics library here: https://honeythecodewitch.com/gfx And my IoT UI/User Experience library here: https://honeythecodewitch.com/uix
honey the codewitch wrote:
My biological dad was a toolmaker - he crafted tools to do things like stamp sheet metal into various forms. It requires a surprising amount of math. I inherited a lot of his intellectual leanings, but not the math. Definitely his penchant for creating, and probably where I get my interest in metalwork.
I can definitely see the parallels between that, and what you do.
honey the codewitch wrote:
sometimes I feel like I didn't "earn" it having never attended uni or even college.
I did 3 years of college, but genuinely felt like as soon as I graduated, pretty much all of that knowledge was obsolete. I mean, some of the theory helped as that tends to remain a constant, but in general...meh. I'm not entirely against the idea floating around, nowadays, that not everybody needs a college education. More power to you, I say, seeing how great you are at it.
-
honey the codewitch wrote:
Why do you code?
I'm too lazy to be a farmer, too clever to be a banker, and too honest to be a politician. What else is left?
Freedom is the freedom to say that two plus two make four. If that is granted, all else follows. -- 6079 Smith W.
I could have really enjoyed metalwork - despite being lazy my urge to create is stronger. :)
Check out my IoT graphics library here: https://honeythecodewitch.com/gfx And my IoT UI/User Experience library here: https://honeythecodewitch.com/uix
-
honey the codewitch wrote:
My biological dad was a toolmaker - he crafted tools to do things like stamp sheet metal into various forms. It requires a surprising amount of math. I inherited a lot of his intellectual leanings, but not the math. Definitely his penchant for creating, and probably where I get my interest in metalwork.
I can definitely see the parallels between that, and what you do.
honey the codewitch wrote:
sometimes I feel like I didn't "earn" it having never attended uni or even college.
I did 3 years of college, but genuinely felt like as soon as I graduated, pretty much all of that knowledge was obsolete. I mean, some of the theory helped as that tends to remain a constant, but in general...meh. I'm not entirely against the idea floating around, nowadays, that not everybody needs a college education. More power to you, I say, seeing how great you are at it.
Thanks. I appreciate that because I tell myself I'm good at it as a pep thing, but I often don't believe it, except right after I've done something really cool. :laugh: I do like that I've avoided all the financial debt and baggage that comes with a formal education but there are holes in my knowledge. And the culture in embedded seems to lean heavily on credentials, and I lose a little sleep over that. "You don't belong in this arena" gets too much play in my head. :~
Check out my IoT graphics library here: https://honeythecodewitch.com/gfx And my IoT UI/User Experience library here: https://honeythecodewitch.com/uix
-
An example are the 2 story tall oil tanker diesel engines that burn crude at like 60RPM, or rotary/Wankel engines and such. Sometimes I think I should have gone into some field where I was building physical things. I mean, I picked up software when I was little because I didn't have an income to keep supporting building frankenbikes and circuits, nor would they let me weld, but I had a computer. I build stuff. It's what I do. I'm a coder of circumstance. Why do you code?
Check out my IoT graphics library here: https://honeythecodewitch.com/gfx And my IoT UI/User Experience library here: https://honeythecodewitch.com/uix
I like to automate things for myself or others that otherwise might be drudgery. That and it can entertain me for hours and hours per day as I'm obsessive.
-
honey the codewitch wrote:
Why do you code?
I'm too lazy to be a farmer, too clever to be a banker, and too honest to be a politician. What else is left?
Freedom is the freedom to say that two plus two make four. If that is granted, all else follows. -- 6079 Smith W.
Adding, I don't want to get political regarding what's happening where you live so this is all I'll say: I'm glad to see you well and hang in there. :sigh:
Check out my IoT graphics library here: https://honeythecodewitch.com/gfx And my IoT UI/User Experience library here: https://honeythecodewitch.com/uix
-
Thanks. I appreciate that because I tell myself I'm good at it as a pep thing, but I often don't believe it, except right after I've done something really cool. :laugh: I do like that I've avoided all the financial debt and baggage that comes with a formal education but there are holes in my knowledge. And the culture in embedded seems to lean heavily on credentials, and I lose a little sleep over that. "You don't belong in this arena" gets too much play in my head. :~
Check out my IoT graphics library here: https://honeythecodewitch.com/gfx And my IoT UI/User Experience library here: https://honeythecodewitch.com/uix
-
An example are the 2 story tall oil tanker diesel engines that burn crude at like 60RPM, or rotary/Wankel engines and such. Sometimes I think I should have gone into some field where I was building physical things. I mean, I picked up software when I was little because I didn't have an income to keep supporting building frankenbikes and circuits, nor would they let me weld, but I had a computer. I build stuff. It's what I do. I'm a coder of circumstance. Why do you code?
Check out my IoT graphics library here: https://honeythecodewitch.com/gfx And my IoT UI/User Experience library here: https://honeythecodewitch.com/uix
because i was not a good enough physicist or mathematician upon completing BA Mathematics and MS Physics and because my MS thesis was a FORTRAN code and because my "advisor" at IIT laughed at me when i informed him i wished to enter a EE BS program having previously completed said programs elsewhere . he insisted i enroll in EE MS program . nonsense . i would have been lost . also because my physics instructor in undergrad suggested i enroll in an MS Physics program . i was happy pushing buttons on IBM System 3 at the time until i got the stupid idea of applying for a technician job at an engineering firm which i was accepted to having answered by quite the coincidence the very same technical interview question i posed to myself only the week prior .
-
OriginalGriff wrote:
I was ten;
I was eight! *fellow kiddie coder fist bump*
OriginalGriff wrote:
'd never seen a computer, let alone used one; I had no idea at all what was involved in software. And neither did anyone else around me, there was no-one to even ask!
Right? Heck, sometimes I still feel like there's nobody to ask!
OriginalGriff wrote:
The closest my school or public libraries came to books on computers was this
I had the benefit of a small amount of material at public libraries, plus periodicals a little later on like CUJ.
OriginalGriff wrote:
But I hated being cold and wet, I hated physical effort. So "indoor work with no heavy lifting" really sounded good!
SAME! :-D
Check out my IoT graphics library here: https://honeythecodewitch.com/gfx And my IoT UI/User Experience library here: https://honeythecodewitch.com/uix
Wow, had to think back. It was summer break and I was in fifth grade. The school was offering special summer programs. My family was struggling to make end's meet and so dad was working extra hours and weekends. Summer vacations were not even thought of (maybe a day trip to a fair or the Jersey shore). There was a computer course offered by one of the large computer companies of the day (I think it was DEC). The cost was low enough that we could afford it. It turned out to be a course in Machine Level Language programming. We covered the logical parts of the computer (arithmetic, logic, control, input, output). We learned the binary language of the opcode instructions. How to structure a solution to a problem as a series of input, process, output blocks. How to code branches by calculating the number of bytes to jump to reach another part of the code. This was real head scratching ones and zeros stuff, but hell, what did we know. We were just kids making a machine do things. If was fun! The person teaching the course was the head of a research division located in a business park about an hour from our school. So as a treat (for the last class), he arranged to have a van pick us up and take us to the research facility to get a tour of the latest machines they were working on and to bring a small program we wrote (limited to no more than 100 steps of machine code) to be run at the facility. While he took us on a tour of the latest machines (big bulky desk like machines that had attached drum storage that looked like a refrigerator turned on it's side). These machines could do word processing, spreadsheets, accounting journal entries, and other business functions without the need for a bulky mainframe. They were on the bleeding edge of technology. He then took us to a special part of the building where they had an old vacuum tube computer in a display museum. He crossed his fingers and had the old computer powered up.(tubes had a tendency to fail regularly). The machine had 4K of memory and a punched tape reader and teletype output. The operator used switches on the front to load the paper tape reading program (about a dozen commands). While we were touring an assistant had keyed our programs into the paper tapes. I was nervous as they took my program on tape and fed it into the reader. It read half of it and then stopped. The operator took the tape out, reentered the reader program through the switches and tried again. This time it read the entire tape. The tubes in the machine seemed to flicker a bit and the telety
