Rant: Things That Don't Work
-
As I sit here using Visual Studio, and tripping over broken features.. then surfing the web and tripping over broken features.. I am compelled to scream. Why do we put up with so many lousy products? This weekend, my wife went to the store to buy my son a tether ball, for use at the school's tether ball courts. She came home with an entire backyard tetherball set. My inclination was to tell her to take it back immediately, because there's no way it could possibly work.. but rather than make her drive all the way back across town, and disappoint my son, I did the "good dad" thing and tried to make it work. Once I had everything out of the box, I was proven correct. The pole had a pointed end which was supposed to be driven into the ground, without the use of a hammer (so as not to bend it). The problem, of course, is that if the ground is soft enough to push the thing in w/out hammering, there is no possible way that it could stand up straight during normal use! Plus, the pole was made of several pieces which fit together quite loosely, so even if the base was secure, the whole thing would wobble. I used a hammer anyway - carefully - and managed to get it deeply into the ground (about a foot) So after three minutes of use, the thing is leaning at a 60 degree angle, and we gave up. My son, disappointed as hell, says to me.. "Daddy, why do they sell things that don't work?" And I had to give him yet another dose of hard-earned cynicism. Since the thing cost $30, and my wife says that tetherballs alone cost $20, and the store is on the other side of town.. I just took the tetherball, tied to it a snap, and we took it down to the school. Meanwhile, I have a pile of junk in the backyard which I can either throw away or add to the growing pile of stuff that should be recycled. It's not that this thing didn't work that pisses me off.. it's not a defective product. It's a product that can't possibly work. And that really pisses me off.
-
As I sit here using Visual Studio, and tripping over broken features.. then surfing the web and tripping over broken features.. I am compelled to scream. Why do we put up with so many lousy products? This weekend, my wife went to the store to buy my son a tether ball, for use at the school's tether ball courts. She came home with an entire backyard tetherball set. My inclination was to tell her to take it back immediately, because there's no way it could possibly work.. but rather than make her drive all the way back across town, and disappoint my son, I did the "good dad" thing and tried to make it work. Once I had everything out of the box, I was proven correct. The pole had a pointed end which was supposed to be driven into the ground, without the use of a hammer (so as not to bend it). The problem, of course, is that if the ground is soft enough to push the thing in w/out hammering, there is no possible way that it could stand up straight during normal use! Plus, the pole was made of several pieces which fit together quite loosely, so even if the base was secure, the whole thing would wobble. I used a hammer anyway - carefully - and managed to get it deeply into the ground (about a foot) So after three minutes of use, the thing is leaning at a 60 degree angle, and we gave up. My son, disappointed as hell, says to me.. "Daddy, why do they sell things that don't work?" And I had to give him yet another dose of hard-earned cynicism. Since the thing cost $30, and my wife says that tetherballs alone cost $20, and the store is on the other side of town.. I just took the tetherball, tied to it a snap, and we took it down to the school. Meanwhile, I have a pile of junk in the backyard which I can either throw away or add to the growing pile of stuff that should be recycled. It's not that this thing didn't work that pisses me off.. it's not a defective product. It's a product that can't possibly work. And that really pisses me off.
-
Last month I bought a new Sony DVD player, it stopped working the 3rd week. So far the longest lasting DVD player I have owned ran for about 6 months. X|
led mike
-
As I sit here using Visual Studio, and tripping over broken features.. then surfing the web and tripping over broken features.. I am compelled to scream. Why do we put up with so many lousy products? This weekend, my wife went to the store to buy my son a tether ball, for use at the school's tether ball courts. She came home with an entire backyard tetherball set. My inclination was to tell her to take it back immediately, because there's no way it could possibly work.. but rather than make her drive all the way back across town, and disappoint my son, I did the "good dad" thing and tried to make it work. Once I had everything out of the box, I was proven correct. The pole had a pointed end which was supposed to be driven into the ground, without the use of a hammer (so as not to bend it). The problem, of course, is that if the ground is soft enough to push the thing in w/out hammering, there is no possible way that it could stand up straight during normal use! Plus, the pole was made of several pieces which fit together quite loosely, so even if the base was secure, the whole thing would wobble. I used a hammer anyway - carefully - and managed to get it deeply into the ground (about a foot) So after three minutes of use, the thing is leaning at a 60 degree angle, and we gave up. My son, disappointed as hell, says to me.. "Daddy, why do they sell things that don't work?" And I had to give him yet another dose of hard-earned cynicism. Since the thing cost $30, and my wife says that tetherballs alone cost $20, and the store is on the other side of town.. I just took the tetherball, tied to it a snap, and we took it down to the school. Meanwhile, I have a pile of junk in the backyard which I can either throw away or add to the growing pile of stuff that should be recycled. It's not that this thing didn't work that pisses me off.. it's not a defective product. It's a product that can't possibly work. And that really pisses me off.
Jim A. Johnson wrote:
Why do we put up with so many lousy products?
Because we are so enamored of Wal*Mart prices that we let them sell us crap from China that is designed by imbeciles and manufactured by peasants and prisoners. We hunger for "everyday low pricing" without considering the indigestion this will bring.
-
Jim A. Johnson wrote:
Why do we put up with so many lousy products?
Because we are so enamored of Wal*Mart prices that we let them sell us crap from China that is designed by imbeciles and manufactured by peasants and prisoners. We hunger for "everyday low pricing" without considering the indigestion this will bring.
Ed Gadziemski wrote:
Because we are so enamored of Wal*Mart prices that we let them sell us crap from China that is designed by imbeciles and manufactured by peasants and prisoners. We hunger for "everyday low pricing" without considering the indigestion this will bring.
So right, and so well said. I avoid Walmart like the plague, but the other day I needed some audio cables and the two Radio Shacks in the area had gone out of business! It was getting late, so I had to find an alternative.... and yep, a Walmart was nearby. I went in there and after spending a long time searching and asking a bunch of unmotivated "associates" for help, I found the cable stand. There was tons of stuff and the prices were much less than what I had seen at Best Buy the day before. Example: a single coaxial connector in Best Buy was selling for $5. In Walmart, two of them were for $2.50! At those prices, I couldn't resist. It later reminded me of the South Park episode. I went a little crazy buying extra junk I didn't really need at the time, just in case I would need it later. :-O It's truly amazing, that place... oh, and it was packed too! Regards, Alvaro
Do we think that the ancient Greek gods still exist? How about Santa Claus or the Easter Bunny? Of course not. There is no verifiable evidence for any supernatural guy in a red suit, magic rabbit, or gods. Just like it’s hypothetically possible for a ’57 Chevy to be orbiting Mars, some gods are also hypothetically possible, but ridiculously improbable. So, let’s be honest with ourselves and look at the world with open eyes, as it actually is. - Mark Thomas
-
Ed Gadziemski wrote:
Because we are so enamored of Wal*Mart prices that we let them sell us crap from China that is designed by imbeciles and manufactured by peasants and prisoners. We hunger for "everyday low pricing" without considering the indigestion this will bring.
So right, and so well said. I avoid Walmart like the plague, but the other day I needed some audio cables and the two Radio Shacks in the area had gone out of business! It was getting late, so I had to find an alternative.... and yep, a Walmart was nearby. I went in there and after spending a long time searching and asking a bunch of unmotivated "associates" for help, I found the cable stand. There was tons of stuff and the prices were much less than what I had seen at Best Buy the day before. Example: a single coaxial connector in Best Buy was selling for $5. In Walmart, two of them were for $2.50! At those prices, I couldn't resist. It later reminded me of the South Park episode. I went a little crazy buying extra junk I didn't really need at the time, just in case I would need it later. :-O It's truly amazing, that place... oh, and it was packed too! Regards, Alvaro
Do we think that the ancient Greek gods still exist? How about Santa Claus or the Easter Bunny? Of course not. There is no verifiable evidence for any supernatural guy in a red suit, magic rabbit, or gods. Just like it’s hypothetically possible for a ’57 Chevy to be orbiting Mars, some gods are also hypothetically possible, but ridiculously improbable. So, let’s be honest with ourselves and look at the world with open eyes, as it actually is. - Mark Thomas
OT Did you manage to clean your wife's machine?
Regards, Nish
Nish’s thoughts on MFC, C++/CLI and .NET (my blog)
Currently working on C++/CLI in Action for Manning Publications. Also visit the Ultimate Toolbox blog -
OT Did you manage to clean your wife's machine?
Regards, Nish
Nish’s thoughts on MFC, C++/CLI and .NET (my blog)
Currently working on C++/CLI in Action for Manning Publications. Also visit the Ultimate Toolbox blogNishant Sivakumar wrote:
Did you manage to clean your wife's machine?
Yep, Ad-Aware detected some worm files -- I forgot their names -- and Housecall didn't find anything else. Thanks for asking, Alvaro
Do we think that the ancient Greek gods still exist? How about Santa Claus or the Easter Bunny? Of course not. There is no verifiable evidence for any supernatural guy in a red suit, magic rabbit, or gods. Just like it’s hypothetically possible for a ’57 Chevy to be orbiting Mars, some gods are also hypothetically possible, but ridiculously improbable. So, let’s be honest with ourselves and look at the world with open eyes, as it actually is. - Mark Thomas
-
As I sit here using Visual Studio, and tripping over broken features.. then surfing the web and tripping over broken features.. I am compelled to scream. Why do we put up with so many lousy products? This weekend, my wife went to the store to buy my son a tether ball, for use at the school's tether ball courts. She came home with an entire backyard tetherball set. My inclination was to tell her to take it back immediately, because there's no way it could possibly work.. but rather than make her drive all the way back across town, and disappoint my son, I did the "good dad" thing and tried to make it work. Once I had everything out of the box, I was proven correct. The pole had a pointed end which was supposed to be driven into the ground, without the use of a hammer (so as not to bend it). The problem, of course, is that if the ground is soft enough to push the thing in w/out hammering, there is no possible way that it could stand up straight during normal use! Plus, the pole was made of several pieces which fit together quite loosely, so even if the base was secure, the whole thing would wobble. I used a hammer anyway - carefully - and managed to get it deeply into the ground (about a foot) So after three minutes of use, the thing is leaning at a 60 degree angle, and we gave up. My son, disappointed as hell, says to me.. "Daddy, why do they sell things that don't work?" And I had to give him yet another dose of hard-earned cynicism. Since the thing cost $30, and my wife says that tetherballs alone cost $20, and the store is on the other side of town.. I just took the tetherball, tied to it a snap, and we took it down to the school. Meanwhile, I have a pile of junk in the backyard which I can either throw away or add to the growing pile of stuff that should be recycled. It's not that this thing didn't work that pisses me off.. it's not a defective product. It's a product that can't possibly work. And that really pisses me off.
Old tire, concrete in a bag, water hose, broken fence pole, nylon rope, and ball. Total cost < $20. Nothing better than a ghetto tetherball.
On two occasions I have been asked [by members of Parliament], 'Pray, Mr. Babbage, if you put into the machine wrong figures, will the right answers come out?' I am not able rightly to apprehend the kind of confusion of ideas that could provoke such a question. - Charles Babbage
-
As I sit here using Visual Studio, and tripping over broken features.. then surfing the web and tripping over broken features.. I am compelled to scream. Why do we put up with so many lousy products? This weekend, my wife went to the store to buy my son a tether ball, for use at the school's tether ball courts. She came home with an entire backyard tetherball set. My inclination was to tell her to take it back immediately, because there's no way it could possibly work.. but rather than make her drive all the way back across town, and disappoint my son, I did the "good dad" thing and tried to make it work. Once I had everything out of the box, I was proven correct. The pole had a pointed end which was supposed to be driven into the ground, without the use of a hammer (so as not to bend it). The problem, of course, is that if the ground is soft enough to push the thing in w/out hammering, there is no possible way that it could stand up straight during normal use! Plus, the pole was made of several pieces which fit together quite loosely, so even if the base was secure, the whole thing would wobble. I used a hammer anyway - carefully - and managed to get it deeply into the ground (about a foot) So after three minutes of use, the thing is leaning at a 60 degree angle, and we gave up. My son, disappointed as hell, says to me.. "Daddy, why do they sell things that don't work?" And I had to give him yet another dose of hard-earned cynicism. Since the thing cost $30, and my wife says that tetherballs alone cost $20, and the store is on the other side of town.. I just took the tetherball, tied to it a snap, and we took it down to the school. Meanwhile, I have a pile of junk in the backyard which I can either throw away or add to the growing pile of stuff that should be recycled. It's not that this thing didn't work that pisses me off.. it's not a defective product. It's a product that can't possibly work. And that really pisses me off.
Hmmm... I hadn't even heard of "tether ball" before. I asked Google and found wisdom. http://www.sportsunlimitedinc.com/besttetherball.html[^] looks like something we use in our backyards here in Sweden also, but I can't seem to remember what the heck we call it... Oh, well. :confused:
-- The Blog: Bits and Pieces
-
As I sit here using Visual Studio, and tripping over broken features.. then surfing the web and tripping over broken features.. I am compelled to scream. Why do we put up with so many lousy products? This weekend, my wife went to the store to buy my son a tether ball, for use at the school's tether ball courts. She came home with an entire backyard tetherball set. My inclination was to tell her to take it back immediately, because there's no way it could possibly work.. but rather than make her drive all the way back across town, and disappoint my son, I did the "good dad" thing and tried to make it work. Once I had everything out of the box, I was proven correct. The pole had a pointed end which was supposed to be driven into the ground, without the use of a hammer (so as not to bend it). The problem, of course, is that if the ground is soft enough to push the thing in w/out hammering, there is no possible way that it could stand up straight during normal use! Plus, the pole was made of several pieces which fit together quite loosely, so even if the base was secure, the whole thing would wobble. I used a hammer anyway - carefully - and managed to get it deeply into the ground (about a foot) So after three minutes of use, the thing is leaning at a 60 degree angle, and we gave up. My son, disappointed as hell, says to me.. "Daddy, why do they sell things that don't work?" And I had to give him yet another dose of hard-earned cynicism. Since the thing cost $30, and my wife says that tetherballs alone cost $20, and the store is on the other side of town.. I just took the tetherball, tied to it a snap, and we took it down to the school. Meanwhile, I have a pile of junk in the backyard which I can either throw away or add to the growing pile of stuff that should be recycled. It's not that this thing didn't work that pisses me off.. it's not a defective product. It's a product that can't possibly work. And that really pisses me off.
-
Last month I bought a new Sony DVD player, it stopped working the 3rd week. So far the longest lasting DVD player I have owned ran for about 6 months. X|
led mike
It can 'work' to your advantage! I keep buying cofee filter machines from ASDA, non have lasted 1 year, so I take them back, get a refund and buy a new one, with a 12 month guarantee. I think it was 4 - 5 years ago that I bought my first one, the UK consumers laws are great! But as has been said, they electricl goods are so cheap to make now that if only a small percentage of people return these items the shop will gain in the long term.
"Normal is getting dressed in clothes that you buy for work and driving through traffic in a car that you are still paying for - in order to get to the job you need to pay for the clothes and the car, and the house you leave vacant all day so you can afford to live in it." - Ellen Goodman
-
As I sit here using Visual Studio, and tripping over broken features.. then surfing the web and tripping over broken features.. I am compelled to scream. Why do we put up with so many lousy products? This weekend, my wife went to the store to buy my son a tether ball, for use at the school's tether ball courts. She came home with an entire backyard tetherball set. My inclination was to tell her to take it back immediately, because there's no way it could possibly work.. but rather than make her drive all the way back across town, and disappoint my son, I did the "good dad" thing and tried to make it work. Once I had everything out of the box, I was proven correct. The pole had a pointed end which was supposed to be driven into the ground, without the use of a hammer (so as not to bend it). The problem, of course, is that if the ground is soft enough to push the thing in w/out hammering, there is no possible way that it could stand up straight during normal use! Plus, the pole was made of several pieces which fit together quite loosely, so even if the base was secure, the whole thing would wobble. I used a hammer anyway - carefully - and managed to get it deeply into the ground (about a foot) So after three minutes of use, the thing is leaning at a 60 degree angle, and we gave up. My son, disappointed as hell, says to me.. "Daddy, why do they sell things that don't work?" And I had to give him yet another dose of hard-earned cynicism. Since the thing cost $30, and my wife says that tetherballs alone cost $20, and the store is on the other side of town.. I just took the tetherball, tied to it a snap, and we took it down to the school. Meanwhile, I have a pile of junk in the backyard which I can either throw away or add to the growing pile of stuff that should be recycled. It's not that this thing didn't work that pisses me off.. it's not a defective product. It's a product that can't possibly work. And that really pisses me off.
You didn't buy the Soft-Ground Stabilising Anti-Tilt Supreme 3.0 Support system to go with it? Its only three times the price of the tetherball and makes it work great! Yeah. X|
regards, Paul Watson Ireland FeedHenry needs you
eh, stop bugging me about it, give it a couple of days, see what happens.
-
Hmmm... I hadn't even heard of "tether ball" before. I asked Google and found wisdom. http://www.sportsunlimitedinc.com/besttetherball.html[^] looks like something we use in our backyards here in Sweden also, but I can't seem to remember what the heck we call it... Oh, well. :confused:
-- The Blog: Bits and Pieces
Jokari or similar wasn't it?
-
Jokari or similar wasn't it?
Nope. Never heard of that one, but googling for it gave some interesting history.
-- The Blog: Bits and Pieces
-
It can 'work' to your advantage! I keep buying cofee filter machines from ASDA, non have lasted 1 year, so I take them back, get a refund and buy a new one, with a 12 month guarantee. I think it was 4 - 5 years ago that I bought my first one, the UK consumers laws are great! But as has been said, they electricl goods are so cheap to make now that if only a small percentage of people return these items the shop will gain in the long term.
"Normal is getting dressed in clothes that you buy for work and driving through traffic in a car that you are still paying for - in order to get to the job you need to pay for the clothes and the car, and the house you leave vacant all day so you can afford to live in it." - Ellen Goodman
That's all very well, but those you keep returning have to be dumped somewhere. Why not splash out on a good quality, long-lasting machine? Neil.
-
That's all very well, but those you keep returning have to be dumped somewhere. Why not splash out on a good quality, long-lasting machine? Neil.
Believe me I have tried! The cheapest ones last weeks, the better ones sometimes 9 months. The really expensive ones about c. 2 years, so it is not worth buying the really expensive ones as they don't last much longer, plus they break out of warranty so I have to pay for a replacement.
"Normal is getting dressed in clothes that you buy for work and driving through traffic in a car that you are still paying for - in order to get to the job you need to pay for the clothes and the car, and the house you leave vacant all day so you can afford to live in it." - Ellen Goodman
-
You didn't buy the Soft-Ground Stabilising Anti-Tilt Supreme 3.0 Support system to go with it? Its only three times the price of the tetherball and makes it work great! Yeah. X|
regards, Paul Watson Ireland FeedHenry needs you
eh, stop bugging me about it, give it a couple of days, see what happens.
In the U.K it used to be called Swingball
-
As I sit here using Visual Studio, and tripping over broken features.. then surfing the web and tripping over broken features.. I am compelled to scream. Why do we put up with so many lousy products? This weekend, my wife went to the store to buy my son a tether ball, for use at the school's tether ball courts. She came home with an entire backyard tetherball set. My inclination was to tell her to take it back immediately, because there's no way it could possibly work.. but rather than make her drive all the way back across town, and disappoint my son, I did the "good dad" thing and tried to make it work. Once I had everything out of the box, I was proven correct. The pole had a pointed end which was supposed to be driven into the ground, without the use of a hammer (so as not to bend it). The problem, of course, is that if the ground is soft enough to push the thing in w/out hammering, there is no possible way that it could stand up straight during normal use! Plus, the pole was made of several pieces which fit together quite loosely, so even if the base was secure, the whole thing would wobble. I used a hammer anyway - carefully - and managed to get it deeply into the ground (about a foot) So after three minutes of use, the thing is leaning at a 60 degree angle, and we gave up. My son, disappointed as hell, says to me.. "Daddy, why do they sell things that don't work?" And I had to give him yet another dose of hard-earned cynicism. Since the thing cost $30, and my wife says that tetherballs alone cost $20, and the store is on the other side of town.. I just took the tetherball, tied to it a snap, and we took it down to the school. Meanwhile, I have a pile of junk in the backyard which I can either throw away or add to the growing pile of stuff that should be recycled. It's not that this thing didn't work that pisses me off.. it's not a defective product. It's a product that can't possibly work. And that really pisses me off.
Yeah, I stopped purchasing things from Wal-mart a long time ago ... less frustration, more money in my pocket etc. etc. Hey, welcome to the world where you can experience the HIGH cost of LOW prices! Cheers, Xaverian
What we need is a patch for human stupidity
-
As I sit here using Visual Studio, and tripping over broken features.. then surfing the web and tripping over broken features.. I am compelled to scream. Why do we put up with so many lousy products? This weekend, my wife went to the store to buy my son a tether ball, for use at the school's tether ball courts. She came home with an entire backyard tetherball set. My inclination was to tell her to take it back immediately, because there's no way it could possibly work.. but rather than make her drive all the way back across town, and disappoint my son, I did the "good dad" thing and tried to make it work. Once I had everything out of the box, I was proven correct. The pole had a pointed end which was supposed to be driven into the ground, without the use of a hammer (so as not to bend it). The problem, of course, is that if the ground is soft enough to push the thing in w/out hammering, there is no possible way that it could stand up straight during normal use! Plus, the pole was made of several pieces which fit together quite loosely, so even if the base was secure, the whole thing would wobble. I used a hammer anyway - carefully - and managed to get it deeply into the ground (about a foot) So after three minutes of use, the thing is leaning at a 60 degree angle, and we gave up. My son, disappointed as hell, says to me.. "Daddy, why do they sell things that don't work?" And I had to give him yet another dose of hard-earned cynicism. Since the thing cost $30, and my wife says that tetherballs alone cost $20, and the store is on the other side of town.. I just took the tetherball, tied to it a snap, and we took it down to the school. Meanwhile, I have a pile of junk in the backyard which I can either throw away or add to the growing pile of stuff that should be recycled. It's not that this thing didn't work that pisses me off.. it's not a defective product. It's a product that can't possibly work. And that really pisses me off.
Jim A. Johnson wrote:
It's not that this thing didn't work that pisses me off.. it's not a defective product. It's a product that can't possibly work. And that really pisses me off.
Ultimately there is no economic incentive to make products that last and work well. The current model is; 1) buy a piece of junk, 2) realize it is defective and bring it back to the store, 3) choose between a different piece of junk, or in store credit. The final decition matters little because you have already paid. Now the only thing that remains is for the manufacturer to reduce their costs as much as possible to maximize their profit. What about a company that puts out a good quality product? Their pricing must be comprable to the junk, or it wont sell. They will sell fewer products because the ones they are selling dont wear out. Therefore they will not do well economically, at least not as well as the company selling junk. Capitolize has a lot going for it, but it is far from a perfect system. In fact I would say it is the worst system out there, except for all the others :-). With appologies to Winston Churchill http://en.thinkexist.com/quotation/it_has_been_said_that_democracy_is_the_worst_form/15815.html[^]
Tanks for your support
Pat O
Blog_ _ _
/*\== /*\== /*\== -
As I sit here using Visual Studio, and tripping over broken features.. then surfing the web and tripping over broken features.. I am compelled to scream. Why do we put up with so many lousy products? This weekend, my wife went to the store to buy my son a tether ball, for use at the school's tether ball courts. She came home with an entire backyard tetherball set. My inclination was to tell her to take it back immediately, because there's no way it could possibly work.. but rather than make her drive all the way back across town, and disappoint my son, I did the "good dad" thing and tried to make it work. Once I had everything out of the box, I was proven correct. The pole had a pointed end which was supposed to be driven into the ground, without the use of a hammer (so as not to bend it). The problem, of course, is that if the ground is soft enough to push the thing in w/out hammering, there is no possible way that it could stand up straight during normal use! Plus, the pole was made of several pieces which fit together quite loosely, so even if the base was secure, the whole thing would wobble. I used a hammer anyway - carefully - and managed to get it deeply into the ground (about a foot) So after three minutes of use, the thing is leaning at a 60 degree angle, and we gave up. My son, disappointed as hell, says to me.. "Daddy, why do they sell things that don't work?" And I had to give him yet another dose of hard-earned cynicism. Since the thing cost $30, and my wife says that tetherballs alone cost $20, and the store is on the other side of town.. I just took the tetherball, tied to it a snap, and we took it down to the school. Meanwhile, I have a pile of junk in the backyard which I can either throw away or add to the growing pile of stuff that should be recycled. It's not that this thing didn't work that pisses me off.. it's not a defective product. It's a product that can't possibly work. And that really pisses me off.
Just curious, did the product have the text "Made in China" anywhere on it?