Is this a stupid idea? [modified]
-
We were given an old 2 stroke lawn mower with a broken pull start. It just so happens that in my socket set is a socket that fits the nut at the end of the crank. I got out the drill, attached the socket and gingerly turned the motor over slowly with the drill. Its got compression so I cleaned the air filter & plug, set the gap & checked the fuel lines.Should I give her a bit with the drill and see if it'll start or is it likely the engine will throw the drill into my face, shin or other body part? The conclution is a bit boring as I managed to repair the starter mechanism
modified on Wednesday, May 21, 2008 8:20 PM
[putting on safety goggles and gloves] No, that sounds fine. :)
Best wishes, Hans
[CodeProject Forum Guidelines] [How To Ask A Question] [My Articles]
-
I say film it, and you'll probably win funniest home videos
Christian Graus Please read this if you don't understand the answer I've given you "also I don't think "TranslateOneToTwoBillion OneHundredAndFortySevenMillion FourHundredAndEightyThreeThousand SixHundredAndFortySeven()" is a very good choice for a function name" - SpacixOne ( offering help to someone who really needed it ) ( spaces added for the benefit of people running at < 1280x1024 )
-
We were given an old 2 stroke lawn mower with a broken pull start. It just so happens that in my socket set is a socket that fits the nut at the end of the crank. I got out the drill, attached the socket and gingerly turned the motor over slowly with the drill. Its got compression so I cleaned the air filter & plug, set the gap & checked the fuel lines.Should I give her a bit with the drill and see if it'll start or is it likely the engine will throw the drill into my face, shin or other body part? The conclution is a bit boring as I managed to repair the starter mechanism
modified on Wednesday, May 21, 2008 8:20 PM
This sounds like a Darwin award in the making. I'd say go for it! :-D
- S 50 cups of coffee and you know it's on!
-
This sounds like a Darwin award in the making. I'd say go for it! :-D
- S 50 cups of coffee and you know it's on!
-
We were given an old 2 stroke lawn mower with a broken pull start. It just so happens that in my socket set is a socket that fits the nut at the end of the crank. I got out the drill, attached the socket and gingerly turned the motor over slowly with the drill. Its got compression so I cleaned the air filter & plug, set the gap & checked the fuel lines.Should I give her a bit with the drill and see if it'll start or is it likely the engine will throw the drill into my face, shin or other body part? The conclution is a bit boring as I managed to repair the starter mechanism
modified on Wednesday, May 21, 2008 8:20 PM
-
Shoule we start a pool on which body part gets the socket? My money's on groin. It's always the groin.
-
We were given an old 2 stroke lawn mower with a broken pull start. It just so happens that in my socket set is a socket that fits the nut at the end of the crank. I got out the drill, attached the socket and gingerly turned the motor over slowly with the drill. Its got compression so I cleaned the air filter & plug, set the gap & checked the fuel lines.Should I give her a bit with the drill and see if it'll start or is it likely the engine will throw the drill into my face, shin or other body part? The conclution is a bit boring as I managed to repair the starter mechanism
modified on Wednesday, May 21, 2008 8:20 PM
-
Steve Echols wrote:
This sounds like a Darwin award in the making
Yeah, all I need is a case of beer and some mates to stand around and watch!
You'll need some kind of explosion for the finale, like a Folgers coffee can filled with siphoned gas and some Swisher Sweets. Right on! :-)
- S 50 cups of coffee and you know it's on!
-
I say film it, and you'll probably win funniest home videos
Christian Graus Please read this if you don't understand the answer I've given you "also I don't think "TranslateOneToTwoBillion OneHundredAndFortySevenMillion FourHundredAndEightyThreeThousand SixHundredAndFortySeven()" is a very good choice for a function name" - SpacixOne ( offering help to someone who really needed it ) ( spaces added for the benefit of people running at < 1280x1024 )
Christian Graus wrote:
I say film it, and you'll probably win funniest home videos
:laugh: :laugh: :laugh: :laugh:
John Carson
-
ghle wrote:
Stupid idea. Use a rope.
Geez Im stupid. Only thing between me and hospital is CP!
You realise that for about $30 you can usually buy a new pull-cord assembly from your local mower shop, right?
------------------------------------------- Don't walk in front of me, I may not follow; Don't walk behind me, I may not lead; Just bugger off and leave me alone!!
-
You realise that for about $30 you can usually buy a new pull-cord assembly from your local mower shop, right?
------------------------------------------- Don't walk in front of me, I may not follow; Don't walk behind me, I may not lead; Just bugger off and leave me alone!!
_Damian S_ wrote:
You realise that for about $30 you can usually buy a new pull-cord assembly from your local mower shop, right?
And where's the fun in that eh? The Mrs wants me to take it and have it fixed / serviced but I wanna play around and see if I can get it going. The spring for the recoil of the cord is stuffed and to get to it I have to take off one side of the crank case. I figure if I do that Ill have to make a new gasket, retighten to the correct torque etc. Doesnt seem worth the effort when a new mower from China is only $200
-
_Damian S_ wrote:
You realise that for about $30 you can usually buy a new pull-cord assembly from your local mower shop, right?
And where's the fun in that eh? The Mrs wants me to take it and have it fixed / serviced but I wanna play around and see if I can get it going. The spring for the recoil of the cord is stuffed and to get to it I have to take off one side of the crank case. I figure if I do that Ill have to make a new gasket, retighten to the correct torque etc. Doesnt seem worth the effort when a new mower from China is only $200
hehe... there's a difference between doing it for fun and it being cost effective... Anything that takes more than an hour to do yourself had better be bloody expensive to pay some other sucker to do it to make it financially worthwhile... having said that, I spent a couple of hours fixing my leaf blower a few weeks back (the carby gasket had died - good thing I had some cardboard and a tube of gasket goo). It was very satisfying to fix it, but it would probably have been cheaper to pitch it and buy a new one!!
------------------------------------------- Don't walk in front of me, I may not follow; Don't walk behind me, I may not lead; Just bugger off and leave me alone!!
-
We were given an old 2 stroke lawn mower with a broken pull start. It just so happens that in my socket set is a socket that fits the nut at the end of the crank. I got out the drill, attached the socket and gingerly turned the motor over slowly with the drill. Its got compression so I cleaned the air filter & plug, set the gap & checked the fuel lines.Should I give her a bit with the drill and see if it'll start or is it likely the engine will throw the drill into my face, shin or other body part? The conclution is a bit boring as I managed to repair the starter mechanism
modified on Wednesday, May 21, 2008 8:20 PM
I'd say "other body part".
We are a big screwed up dysfunctional psychotic happy family - some more screwed up, others more happy, but everybody's psychotic joint venture definition of CP
blog: TDD - the Aha! | Linkify!| FoldWithUs! | sighist -
hehe... there's a difference between doing it for fun and it being cost effective... Anything that takes more than an hour to do yourself had better be bloody expensive to pay some other sucker to do it to make it financially worthwhile... having said that, I spent a couple of hours fixing my leaf blower a few weeks back (the carby gasket had died - good thing I had some cardboard and a tube of gasket goo). It was very satisfying to fix it, but it would probably have been cheaper to pitch it and buy a new one!!
------------------------------------------- Don't walk in front of me, I may not follow; Don't walk behind me, I may not lead; Just bugger off and leave me alone!!
_Damian S_ wrote:
hehe... there's a difference between doing it for fun and it being cost effective...
In all honestly the best thing to do would be pay the $30 once a month for someone to come and mow it for me and put up with the fact they do a bad job. But its a cool old Victa, its 2 stroke so it'll smell right and Im an Aussie bloke with a back yard and a shed.
-
_Damian S_ wrote:
hehe... there's a difference between doing it for fun and it being cost effective...
In all honestly the best thing to do would be pay the $30 once a month for someone to come and mow it for me and put up with the fact they do a bad job. But its a cool old Victa, its 2 stroke so it'll smell right and Im an Aussie bloke with a back yard and a shed.
Josh Gray wrote:
Aussie bloke with a back yard and a shed
I'm hearin' ya brother!! I have a tractor with slasher!! You don't reckon the chance of losing a child is high as the grass at the moment!?!??!?
------------------------------------------- Don't walk in front of me, I may not follow; Don't walk behind me, I may not lead; Just bugger off and leave me alone!!
-
Josh Gray wrote:
Aussie bloke with a back yard and a shed
I'm hearin' ya brother!! I have a tractor with slasher!! You don't reckon the chance of losing a child is high as the grass at the moment!?!??!?
------------------------------------------- Don't walk in front of me, I may not follow; Don't walk behind me, I may not lead; Just bugger off and leave me alone!!
_Damian S_ wrote:
You don't reckon the chance of losing a child is high as the grass at the moment!?!??!?
I dont quite follow sorry. The lawn is Sir Walter grass that I laid last year. I grew like nothing else through the summer but seems to have slowed down now. Its just under knee hight in places
-
We were given an old 2 stroke lawn mower with a broken pull start. It just so happens that in my socket set is a socket that fits the nut at the end of the crank. I got out the drill, attached the socket and gingerly turned the motor over slowly with the drill. Its got compression so I cleaned the air filter & plug, set the gap & checked the fuel lines.Should I give her a bit with the drill and see if it'll start or is it likely the engine will throw the drill into my face, shin or other body part? The conclution is a bit boring as I managed to repair the starter mechanism
modified on Wednesday, May 21, 2008 8:20 PM
You made it into today's issue of the Insider!!
------------------------------------------- Don't walk in front of me, I may not follow; Don't walk behind me, I may not lead; Just bugger off and leave me alone!!
-
You made it into today's issue of the Insider!!
------------------------------------------- Don't walk in front of me, I may not follow; Don't walk behind me, I may not lead; Just bugger off and leave me alone!!
-
_Damian S_ wrote:
You don't reckon the chance of losing a child is high as the grass at the moment!?!??!?
I dont quite follow sorry. The lawn is Sir Walter grass that I laid last year. I grew like nothing else through the summer but seems to have slowed down now. Its just under knee hight in places
Tractor + slasher = very dangerous... I have two kids under 8. Therefore me driving tractor through grass with slasher attached = very dangerous for kids. Hence chance of losing a child (under slasher) is as high as the grass (currently about a metre high in the back paddock). It's not funny when you have to explain it... :rolleyes: (Some would say it's not funny period.)
------------------------------------------- Don't walk in front of me, I may not follow; Don't walk behind me, I may not lead; Just bugger off and leave me alone!!
