Front-panel LED Module [modified]
-
I'm building a firewall appliance, and would really like to put the NIC activity lights on the front of the box. My soldering-fu is not practically non-existent, so I went in search of a programmable USB LED controller. I found this ($45): http://groovygamegear.com/webstore/index.php?main_page=product_info&cPath=82&products_id=239[^] An ActiveXrement OCX file is available for download, but my firewall is powered by FreeBSD, so I'm going to have to write my own code for this thing. Does anyone here have any experience writing micro-controller code? I also found this - it's kinda pricey ($125) but with the 2-line LCD display, it's more versatile and they've got code samples for pretty much any language/platform you could name: http://www.phidgets.com/products.php?category=15&product_id=1203[^] And this ($99): http://www.cypress.com/?id=1580[^] And this ($90): http://www.robotshop.ca/devantech-usb-8-channel-relay-1.html[^] I don't need anything fancy, just the ability to control two LEDs per NIC - one to indicate speed (green=100, orange=1000), and one to indicate traffic (blue or green). If anyone has any other hardware recommendations, I'm listening. BTW, I found this as well. It uses an arduino "open hardware" controller and allows you to build your own LED controller. Definitely inexpensive, but there's that pesky soldering requirement. :) http://www.arduino.cc/en/Tutorial/LEDDriver[^]
.45 ACP - because shooting twice is just silly
-
I'm building a firewall appliance, and would really like to put the NIC activity lights on the front of the box. My soldering-fu is not practically non-existent, so I went in search of a programmable USB LED controller. I found this ($45): http://groovygamegear.com/webstore/index.php?main_page=product_info&cPath=82&products_id=239[^] An ActiveXrement OCX file is available for download, but my firewall is powered by FreeBSD, so I'm going to have to write my own code for this thing. Does anyone here have any experience writing micro-controller code? I also found this - it's kinda pricey ($125) but with the 2-line LCD display, it's more versatile and they've got code samples for pretty much any language/platform you could name: http://www.phidgets.com/products.php?category=15&product_id=1203[^] And this ($99): http://www.cypress.com/?id=1580[^] And this ($90): http://www.robotshop.ca/devantech-usb-8-channel-relay-1.html[^] I don't need anything fancy, just the ability to control two LEDs per NIC - one to indicate speed (green=100, orange=1000), and one to indicate traffic (blue or green). If anyone has any other hardware recommendations, I'm listening. BTW, I found this as well. It uses an arduino "open hardware" controller and allows you to build your own LED controller. Definitely inexpensive, but there's that pesky soldering requirement. :) http://www.arduino.cc/en/Tutorial/LEDDriver[^]
.45 ACP - because shooting twice is just silly
-
I'm building a firewall appliance, and would really like to put the NIC activity lights on the front of the box. My soldering-fu is not practically non-existent, so I went in search of a programmable USB LED controller. I found this ($45): http://groovygamegear.com/webstore/index.php?main_page=product_info&cPath=82&products_id=239[^] An ActiveXrement OCX file is available for download, but my firewall is powered by FreeBSD, so I'm going to have to write my own code for this thing. Does anyone here have any experience writing micro-controller code? I also found this - it's kinda pricey ($125) but with the 2-line LCD display, it's more versatile and they've got code samples for pretty much any language/platform you could name: http://www.phidgets.com/products.php?category=15&product_id=1203[^] And this ($99): http://www.cypress.com/?id=1580[^] And this ($90): http://www.robotshop.ca/devantech-usb-8-channel-relay-1.html[^] I don't need anything fancy, just the ability to control two LEDs per NIC - one to indicate speed (green=100, orange=1000), and one to indicate traffic (blue or green). If anyone has any other hardware recommendations, I'm listening. BTW, I found this as well. It uses an arduino "open hardware" controller and allows you to build your own LED controller. Definitely inexpensive, but there's that pesky soldering requirement. :) http://www.arduino.cc/en/Tutorial/LEDDriver[^]
.45 ACP - because shooting twice is just silly
John Simmons / outlaw programmer wrote:
NIC activity lights on the front of the box
Turn the box around. Done. :-D
-
I'm building a firewall appliance, and would really like to put the NIC activity lights on the front of the box. My soldering-fu is not practically non-existent, so I went in search of a programmable USB LED controller. I found this ($45): http://groovygamegear.com/webstore/index.php?main_page=product_info&cPath=82&products_id=239[^] An ActiveXrement OCX file is available for download, but my firewall is powered by FreeBSD, so I'm going to have to write my own code for this thing. Does anyone here have any experience writing micro-controller code? I also found this - it's kinda pricey ($125) but with the 2-line LCD display, it's more versatile and they've got code samples for pretty much any language/platform you could name: http://www.phidgets.com/products.php?category=15&product_id=1203[^] And this ($99): http://www.cypress.com/?id=1580[^] And this ($90): http://www.robotshop.ca/devantech-usb-8-channel-relay-1.html[^] I don't need anything fancy, just the ability to control two LEDs per NIC - one to indicate speed (green=100, orange=1000), and one to indicate traffic (blue or green). If anyone has any other hardware recommendations, I'm listening. BTW, I found this as well. It uses an arduino "open hardware" controller and allows you to build your own LED controller. Definitely inexpensive, but there's that pesky soldering requirement. :) http://www.arduino.cc/en/Tutorial/LEDDriver[^]
.45 ACP - because shooting twice is just silly
I've been spending a lot of time lately with the Atmel micro controllers,, very inexpensive and really powerful. If all you are wanting to do is control some LEDs then this[^] in combination with an LED breakout board, I've seen them but right off the top of my head I can't remember where, might do the trick without any soldering. There are a few free IDEs available Arduino has one, primitive but can use C++. The one I use is "AVR Studio", VS2005 style IDE but only Assembler and C. There is plenty of example code and libraries available so learning curve should be minimal. Any way I can help let me know Mike [Edit] Found this if it helps [^]
Age doesn't make you forgetful. Having way too many stupid things to remember makes you forgetful. http://www.hq4thmarinescomm.com[^] My Site
modified on Sunday, June 13, 2010 1:01 PM
-
A thought - does it have serial ports with spare handshake lines? These could drive high efficiency LEDs directly and any soldering would be on a separate cable assembly.
Join the cool kids - Come fold with us[^]
Does what have serial ports?
.45 ACP - because shooting twice is just silly
-----
"Why don't you tie a kerosene-soaked rag around your ankles so the ants won't climb up and eat your candy ass..." - Dale Earnhardt, 1997
-----
"The staggering layers of obscenity in your statement make it a work of art on so many levels." - J. Jystad, 2001 -
I'm building a firewall appliance, and would really like to put the NIC activity lights on the front of the box. My soldering-fu is not practically non-existent, so I went in search of a programmable USB LED controller. I found this ($45): http://groovygamegear.com/webstore/index.php?main_page=product_info&cPath=82&products_id=239[^] An ActiveXrement OCX file is available for download, but my firewall is powered by FreeBSD, so I'm going to have to write my own code for this thing. Does anyone here have any experience writing micro-controller code? I also found this - it's kinda pricey ($125) but with the 2-line LCD display, it's more versatile and they've got code samples for pretty much any language/platform you could name: http://www.phidgets.com/products.php?category=15&product_id=1203[^] And this ($99): http://www.cypress.com/?id=1580[^] And this ($90): http://www.robotshop.ca/devantech-usb-8-channel-relay-1.html[^] I don't need anything fancy, just the ability to control two LEDs per NIC - one to indicate speed (green=100, orange=1000), and one to indicate traffic (blue or green). If anyone has any other hardware recommendations, I'm listening. BTW, I found this as well. It uses an arduino "open hardware" controller and allows you to build your own LED controller. Definitely inexpensive, but there's that pesky soldering requirement. :) http://www.arduino.cc/en/Tutorial/LEDDriver[^]
.45 ACP - because shooting twice is just silly
The Arduino is amazingly simple, and quite fun to play with. My fiancee got me one for my birthday, and I've had lots of fun with it. It would be really simple to accomplish what you want to achieve.
-- Kein Mitleid Für Die Mehrheit
-
I'm building a firewall appliance, and would really like to put the NIC activity lights on the front of the box. My soldering-fu is not practically non-existent, so I went in search of a programmable USB LED controller. I found this ($45): http://groovygamegear.com/webstore/index.php?main_page=product_info&cPath=82&products_id=239[^] An ActiveXrement OCX file is available for download, but my firewall is powered by FreeBSD, so I'm going to have to write my own code for this thing. Does anyone here have any experience writing micro-controller code? I also found this - it's kinda pricey ($125) but with the 2-line LCD display, it's more versatile and they've got code samples for pretty much any language/platform you could name: http://www.phidgets.com/products.php?category=15&product_id=1203[^] And this ($99): http://www.cypress.com/?id=1580[^] And this ($90): http://www.robotshop.ca/devantech-usb-8-channel-relay-1.html[^] I don't need anything fancy, just the ability to control two LEDs per NIC - one to indicate speed (green=100, orange=1000), and one to indicate traffic (blue or green). If anyone has any other hardware recommendations, I'm listening. BTW, I found this as well. It uses an arduino "open hardware" controller and allows you to build your own LED controller. Definitely inexpensive, but there's that pesky soldering requirement. :) http://www.arduino.cc/en/Tutorial/LEDDriver[^]
.45 ACP - because shooting twice is just silly
You can buy this interface board as a kit or pre-built http://www.velleman.eu/distributor/products/view/?id=351346[^]
==================================== Transvestites - Roberts in Disguise! ====================================
-
You can buy this interface board as a kit or pre-built http://www.velleman.eu/distributor/products/view/?id=351346[^]
==================================== Transvestites - Roberts in Disguise! ====================================
-
Your URL redirects to the pick a country/language page so I've no idea which of their products you're suggesting.
3x12=36 2x12=24 1x12=12 0x12=18
Try this link - the same kit http://www.maplin.co.uk/module.aspx?moduleno=42857[^]
==================================== Transvestites - Roberts in Disguise! ====================================
-
You can buy this interface board as a kit or pre-built http://www.velleman.eu/distributor/products/view/?id=351346[^]
==================================== Transvestites - Roberts in Disguise! ====================================
The arduino is the same thing, and it's half the price, but thanks for the link.
.45 ACP - because shooting twice is just silly
-----
"Why don't you tie a kerosene-soaked rag around your ankles so the ants won't climb up and eat your candy ass..." - Dale Earnhardt, 1997
-----
"The staggering layers of obscenity in your statement make it a work of art on so many levels." - J. Jystad, 2001
