Diagrams
-
I see many different nice looking diagrams in cp articles and every time i wonder about what software did you use to create your diagrams, not only for cp articles but also for your day-by-day work... I'm looking for such a software. What do you use and what do you recommend ? Thank you.
What kind of diagrams are you looking for - I suspect many here use a variety of tools for different purposes. I know I do... :-D
Real men don't use instructions. They are only the manufacturers opinion on how to put the thing together.
-
What kind of diagrams are you looking for - I suspect many here use a variety of tools for different purposes. I know I do... :-D
Real men don't use instructions. They are only the manufacturers opinion on how to put the thing together.
-
"When you only have a very expensive torque wrench, every problem become a nail" - my wife. Well, what she actually says is "What's this?" then uses it as a hammer regardless. Or a spade. Or chisel. Or spanner. Or...:mad:
Real men don't use instructions. They are only the manufacturers opinion on how to put the thing together.
-
"When you only have a very expensive torque wrench, every problem become a nail" - my wife. Well, what she actually says is "What's this?" then uses it as a hammer regardless. Or a spade. Or chisel. Or spanner. Or...:mad:
Real men don't use instructions. They are only the manufacturers opinion on how to put the thing together.
To rewire a plug? Knife. To ease the lid from a paint pot? Knife. To scrape wall paper from a wall? Knife. My wife's toolkit!
------------------------------------ I will never again mention that I was the poster of the One Millionth Lounge Post, nor that it was complete drivel. Dalek Dave CCC League Table Link CCC Link[^]
-
What kind of diagrams are you looking for - I suspect many here use a variety of tools for different purposes. I know I do... :-D
Real men don't use instructions. They are only the manufacturers opinion on how to put the thing together.
I'm thinking about usual stuff like workflows, application layers, architecture... etc
-
I see many different nice looking diagrams in cp articles and every time i wonder about what software did you use to create your diagrams, not only for cp articles but also for your day-by-day work... I'm looking for such a software. What do you use and what do you recommend ? Thank you.
UML - Enterprise Architect Class diagrams - Visual Studio / Enterprise Architect Screen shots - Fireworks, Photoshop, Paint.NET
I have CDO, it's OCD with the letters in the right order; just as they ruddy well should be
Forgive your enemies - it messes with their heads
-
To rewire a plug? Knife. To ease the lid from a paint pot? Knife. To scrape wall paper from a wall? Knife. My wife's toolkit!
------------------------------------ I will never again mention that I was the poster of the One Millionth Lounge Post, nor that it was complete drivel. Dalek Dave CCC League Table Link CCC Link[^]
To get stuck toast out of a toaster Kni-i-i-i-i-i-i-ffffffffffffffffffffffffffffffffffff Note to self: Must switch off the power next time
He took it all too far, but boy could he play guitar!
-
To get stuck toast out of a toaster Kni-i-i-i-i-i-i-ffffffffffffffffffffffffffffffffffff Note to self: Must switch off the power next time
He took it all too far, but boy could he play guitar!
-
UML - Enterprise Architect Class diagrams - Visual Studio / Enterprise Architect Screen shots - Fireworks, Photoshop, Paint.NET
I have CDO, it's OCD with the letters in the right order; just as they ruddy well should be
Forgive your enemies - it messes with their heads
-
To rewire a plug? Knife. To ease the lid from a paint pot? Knife. To scrape wall paper from a wall? Knife. My wife's toolkit!
------------------------------------ I will never again mention that I was the poster of the One Millionth Lounge Post, nor that it was complete drivel. Dalek Dave CCC League Table Link CCC Link[^]
-
I see many different nice looking diagrams in cp articles and every time i wonder about what software did you use to create your diagrams, not only for cp articles but also for your day-by-day work... I'm looking for such a software. What do you use and what do you recommend ? Thank you.
-
To rewire a plug? Knife. To ease the lid from a paint pot? Knife. To scrape wall paper from a wall? Knife. My wife's toolkit!
------------------------------------ I will never again mention that I was the poster of the One Millionth Lounge Post, nor that it was complete drivel. Dalek Dave CCC League Table Link CCC Link[^]
To rewire a plug? Scissors. To ease the lid from a paint pot? Expensive-and-used-to-be-sharp-but-now-has-a-big-ding-in-the-blade chisel(s) . To scrape wall paper from a wall? Don't know - but I had to go and buy a plasterers float and a big bag of finish plaster to fix the damage. Oh, and learn to plaster (a bit). To prune a chilli bush in the greenhouse? Pliers. Then left in a puddle. To tighten screws in a door hinge - club hammer. To smooth a bit of fence that gave her splinters when she leant on it? Power plane!?! Would have been nice if she had checked for nails first, but hey? The blades aren't too expensive, and they only take an hour or so to replace properly. :doh:
Real men don't use instructions. They are only the manufacturers opinion on how to put the thing together.
-
I see many different nice looking diagrams in cp articles and every time i wonder about what software did you use to create your diagrams, not only for cp articles but also for your day-by-day work... I'm looking for such a software. What do you use and what do you recommend ? Thank you.
-
Chris C-B wrote:
And paint for code.
My God! That could work! Monochrome would be easiest, Black pixel for 0, white for 1. Now there is a possibility for my small series of Tip/Tick articles designed to get lazy student thrown off their course... So far I have: 1) Converting numbers to words via a monolithic switch statement. 2) Converting numbers to Roman numerals via a huge database. It's worth thinking of 3) Doing something homeworky by pixel manipulation of an image control. Hmm. Need to look for an opportunity... :laugh:
Real men don't use instructions. They are only the manufacturers opinion on how to put the thing together.
-
Nope. I have no need for it as other apps have this more than covered. I have it installed, but I never use it.
I have CDO, it's OCD with the letters in the right order; just as they ruddy well should be
Forgive your enemies - it messes with their heads
-
To rewire a plug? Scissors. To ease the lid from a paint pot? Expensive-and-used-to-be-sharp-but-now-has-a-big-ding-in-the-blade chisel(s) . To scrape wall paper from a wall? Don't know - but I had to go and buy a plasterers float and a big bag of finish plaster to fix the damage. Oh, and learn to plaster (a bit). To prune a chilli bush in the greenhouse? Pliers. Then left in a puddle. To tighten screws in a door hinge - club hammer. To smooth a bit of fence that gave her splinters when she leant on it? Power plane!?! Would have been nice if she had checked for nails first, but hey? The blades aren't too expensive, and they only take an hour or so to replace properly. :doh:
Real men don't use instructions. They are only the manufacturers opinion on how to put the thing together.
Mrs Wife is another single-tool type. Whatever the problem, she just calls me.
Panic, Chaos, Destruction. My work here is done. or "Drink. Get drunk. Fall over." - P O'H
-
I see many different nice looking diagrams in cp articles and every time i wonder about what software did you use to create your diagrams, not only for cp articles but also for your day-by-day work... I'm looking for such a software. What do you use and what do you recommend ? Thank you.
Lucian-aSterX wrote:
I'm looking for such a software. What do you use and what do you recommend ?
Visio. Marc
-
Dalek Dave wrote:
I have so done that before
X|
-
I see many different nice looking diagrams in cp articles and every time i wonder about what software did you use to create your diagrams, not only for cp articles but also for your day-by-day work... I'm looking for such a software. What do you use and what do you recommend ? Thank you.
Believe it or not, Visio is pretty much the best I have used for building diagrams of any kind, from drawing direction maps for company coming into town, to network diagrams, to simple flowcharts...
