I looked askance at the idea of 'personal' 3d printers until ...
-
BillWoodruff wrote:
Here comes a future I can't imagine I need
Death??? ;) Marc
Imperative to Functional Programming Succinctly Contributors Wanted for Higher Order Programming Project!
Marc Clifton wrote:
Death??? ;)
Not yet ! :wtf:
«I want to stay as close to the edge as I can without going over. Out on the edge you see all kinds of things you can't see from the center» Kurt Vonnegut.
-
BillWoodruff wrote:
Here comes a future I can't imagine I need
Death??? ;) Marc
Imperative to Functional Programming Succinctly Contributors Wanted for Higher Order Programming Project!
Marc Clifton wrote:
Death??? ;)
Too early to say. :wtf:
«I want to stay as close to the edge as I can without going over. Out on the edge you see all kinds of things you can't see from the center» Kurt Vonnegut.
-
I saw this video of GlowForge: [^]; company site: [^]. I think that's a very cool device ... which I will never own, but ... I recall when the first Apple LaserWriter that the public could rent time on appeared at Krishna Copy in Berkeley, California, in late 1985. The LaserWriter sold for US $2500 then, which I estimate would be equivalent to around 4K US $ today, the future full-price of the GlowForge printer Within a month, I started my first company, 'Technical Document Design,' got lucky, bagged a major client who was willing pay premium for fast turn-around graphics production. Created designs in MacDraw, printed them on the LaserWriter, had a local plate-maker/photographer turn them into 8 inch by 10 inch film transparencies for overhead-projector display. Four months later I could actually buy my own LaserWriter, but I'll never forget the days at Krishna Copy's "laser parlour" [1] where stoned-out hippies mixed with yuppies (imagine patchouli, sandalwood, with top notes of Old Spice and Bay Rum), and children, and dogs, were often found under the tables holding the LaserWriters :) So, perhaps it is the prerogative of being older (but not wiser) to yawn, and say: "Here comes a future I can't imagine I need" ? cheers, Bill [1] I take credit for coining the term "laser parlour," which actually got some usage in Cult-of-the-Mac circles and media.
«I want to stay as close to the edge as I can without going over. Out on the edge you see all kinds of things you can't see from the center» Kurt Vonnegut.
When they will cost substantially less and the printing materials too, I'll buy one. I'll just wait for a easy 3D designing tool (I'm no designer nor artist) because I'd like to make my own miniatrues for D&D games - the original ones suck a lot, not even one gets close to my idea of what the PG should be.
GCS d--- s-/++ a- C++++ U+++ P- L- E-- W++ N++ o+ K- w+++ O? M-- V? PS+ PE- Y+ PGP t++ 5? X R++ tv-- b+ DI+++ D++ G e++>+++ h--- ++>+++ y+++* Weapons extension: ma- k++ F+2 X If you think 'goto' is evil, try writing an Assembly program without JMP. -- TNCaver "When you have eliminated the JavaScript, whatever remains must be an empty page." -- Mike Hankey
-
I can't - at the moment - see any reason why I'd want or need a current-generation 3D printer. Maybe when the printed material is a little more robust, or the print speed is in minutes rather than hours. And when colours, textures, and "flexibility" can be manufactured in instead of just "almost hard" and "nothing". But then of course, they will sell like hot cakes to the people who currently like their ladies inflatable... :laugh:
Bad command or file name. Bad, bad command! Sit! Stay! Staaaay...
-
A couple of things here: 1) I can't afford its fuel consumption. 2) It'd be a bugger to park at Tescos. 3) No room for the shopping. 4) No room for Herself (which may be counted as an advantage from time to time, I'll admit). 5) There may be a few small components there that they didn't 3D print.
Bad command or file name. Bad, bad command! Sit! Stay! Staaaay...
-
I saw this video of GlowForge: [^]; company site: [^]. I think that's a very cool device ... which I will never own, but ... I recall when the first Apple LaserWriter that the public could rent time on appeared at Krishna Copy in Berkeley, California, in late 1985. The LaserWriter sold for US $2500 then, which I estimate would be equivalent to around 4K US $ today, the future full-price of the GlowForge printer Within a month, I started my first company, 'Technical Document Design,' got lucky, bagged a major client who was willing pay premium for fast turn-around graphics production. Created designs in MacDraw, printed them on the LaserWriter, had a local plate-maker/photographer turn them into 8 inch by 10 inch film transparencies for overhead-projector display. Four months later I could actually buy my own LaserWriter, but I'll never forget the days at Krishna Copy's "laser parlour" [1] where stoned-out hippies mixed with yuppies (imagine patchouli, sandalwood, with top notes of Old Spice and Bay Rum), and children, and dogs, were often found under the tables holding the LaserWriters :) So, perhaps it is the prerogative of being older (but not wiser) to yawn, and say: "Here comes a future I can't imagine I need" ? cheers, Bill [1] I take credit for coining the term "laser parlour," which actually got some usage in Cult-of-the-Mac circles and media.
«I want to stay as close to the edge as I can without going over. Out on the edge you see all kinds of things you can't see from the center» Kurt Vonnegut.
BillWoodruff wrote:
So, perhaps it is the prerogative of being older (but not wiser) to yawn, and say: "Here comes a future I can't imagine I need" ?
That really is compelling technology Bill but, like you, I don't see what I'd use it for. I can see how someone who is inclined toward doing crafts might want one, though. I dunno; I've got a MacBook Pro here in my lab that could use a little embellishment! Think I ought to buy in so I can pretty it up? ;-)
-
I saw this video of GlowForge: [^]; company site: [^]. I think that's a very cool device ... which I will never own, but ... I recall when the first Apple LaserWriter that the public could rent time on appeared at Krishna Copy in Berkeley, California, in late 1985. The LaserWriter sold for US $2500 then, which I estimate would be equivalent to around 4K US $ today, the future full-price of the GlowForge printer Within a month, I started my first company, 'Technical Document Design,' got lucky, bagged a major client who was willing pay premium for fast turn-around graphics production. Created designs in MacDraw, printed them on the LaserWriter, had a local plate-maker/photographer turn them into 8 inch by 10 inch film transparencies for overhead-projector display. Four months later I could actually buy my own LaserWriter, but I'll never forget the days at Krishna Copy's "laser parlour" [1] where stoned-out hippies mixed with yuppies (imagine patchouli, sandalwood, with top notes of Old Spice and Bay Rum), and children, and dogs, were often found under the tables holding the LaserWriters :) So, perhaps it is the prerogative of being older (but not wiser) to yawn, and say: "Here comes a future I can't imagine I need" ? cheers, Bill [1] I take credit for coining the term "laser parlour," which actually got some usage in Cult-of-the-Mac circles and media.
«I want to stay as close to the edge as I can without going over. Out on the edge you see all kinds of things you can't see from the center» Kurt Vonnegut.
Your subject line shows your knowledge of the subject. It's a laser engraver/cutter not a 3d printer.
-
Your subject line shows your knowledge of the subject. It's a laser engraver/cutter not a 3d printer.
Actually that's the nomenclature that the company itself used in the title of their video and website.
-
Your subject line shows your knowledge of the subject. It's a laser engraver/cutter not a 3d printer.
Actually that's the nomenclature that the company itself used in the title of their promo video.
-
I can't - at the moment - see any reason why I'd want or need a current-generation 3D printer. Maybe when the printed material is a little more robust, or the print speed is in minutes rather than hours. And when colours, textures, and "flexibility" can be manufactured in instead of just "almost hard" and "nothing". But then of course, they will sell like hot cakes to the people who currently like their ladies inflatable... :laugh:
Bad command or file name. Bad, bad command! Sit! Stay! Staaaay...
If you have a dual-head extruder, you can do hard and flexible printing in the same object. For an example, check out some of the stuff James at xrobots.co.uk[^] does with a combination of ABS and ninjaflex. With multi-head extruders, you can do different colors in the same print too.
