Only American and Swahili use mm/dd for dates
-
tl;dr everything yet, but here is my 2 cents so far: I agree that a base 12 number system would be best, 1/3 would be represented as 0.4. I think the word you wanted was claptrap. As to the American date format, I think it follows our speech pattern. In the original example we would say "May twenty fifth", so in England and Australia do you say "Twenty five May"? (I think I have heard this before). As to Metric vs English/Imperial/American we have a saying 'There are 2 kinds of of nations, those that walked on the moon and those that use the Metric system' (I kid, I think NASA has always used Metric).
As an engineer, I get to be fluent in both systems. Conversions between the two can get you into a lot of trouble - NASA lost a Mars probe because of it. I MUCH prefer metric/SI units, even though I still use English/Imperial in everyday usage and for some professional terms; altitude in feet, speed in knots, weight (NOT mass) in pounds. And don't even get me started on Fahrenheit vs. Kelvin and affine spaces ... The nicest thing about SI from my point of view is that when you make a mistake, you're off by one or more orders of magnitude, and it's easy to notice. With English/Imperial, errors are often not so apparent. More than once I've tried to explain to a fellow (but not computer savvy) engineer that 0.4 (decimal) is a repeating fraction in binary. Base-10 floating representation in binary causes all sorts of issues for numerical methods which are not unlike unit conversions.
-
tl;dr everything yet, but here is my 2 cents so far: I agree that a base 12 number system would be best, 1/3 would be represented as 0.4. I think the word you wanted was claptrap. As to the American date format, I think it follows our speech pattern. In the original example we would say "May twenty fifth", so in England and Australia do you say "Twenty five May"? (I think I have heard this before). As to Metric vs English/Imperial/American we have a saying 'There are 2 kinds of of nations, those that walked on the moon and those that use the Metric system' (I kid, I think NASA has always used Metric).
And for dates, either DAY MON YEAR, where MON is a three letter abbreviation (25 MAY 2016), or YEARMONTHDAY(20160526), sometimes with time appended, which sorts numerically very nicely. And always add the leading zero in either case.
-
Oh, and Micronesia. At least according to Wikipedia. So why does pretty much every US based service that caters to a worldwide audience use mm/dd/yyyy as a date format Latest example this hour is VS team services "Access issues with Visual Studio Team Services – 5/25 – Investigating". 5/25 = 25 May. That's easy. But when I see 6/7 or 10/8 I have to manually check the site and see what culture they are based in. No one in the US (I'm guessing - apart from ex-pats) worry about this. Or are probably even aware of this issue. Everyone else in every other country is aware of this issue. Everyone in Canada manages to deal with it. And I don't know how their brains don't explode. Canada uses dd/mm/yyyy. Except when it uses mm/dd/yyyy because either it's a US based company, they are using a US based system, they are trying to be nice to their US based customers, because they just forgot to use dd/mm/yyyy or because they know it's me and so they deliberately use an ambiguous date format to do my head in. Date formats in Canada are totally and completely messed up. So: Why, in this day and age, do those in the US, when writing for an international audience, still use mm/dd/yyyy? (And I'll add another one: Why do companies in the US find it impossible to ship outside the US? It's very odd) OK, back to hitting refresh several times a second waiting for Team Services to come back online.
cheers Chris Maunder
-
Oh, and Micronesia. At least according to Wikipedia. So why does pretty much every US based service that caters to a worldwide audience use mm/dd/yyyy as a date format Latest example this hour is VS team services "Access issues with Visual Studio Team Services – 5/25 – Investigating". 5/25 = 25 May. That's easy. But when I see 6/7 or 10/8 I have to manually check the site and see what culture they are based in. No one in the US (I'm guessing - apart from ex-pats) worry about this. Or are probably even aware of this issue. Everyone else in every other country is aware of this issue. Everyone in Canada manages to deal with it. And I don't know how their brains don't explode. Canada uses dd/mm/yyyy. Except when it uses mm/dd/yyyy because either it's a US based company, they are using a US based system, they are trying to be nice to their US based customers, because they just forgot to use dd/mm/yyyy or because they know it's me and so they deliberately use an ambiguous date format to do my head in. Date formats in Canada are totally and completely messed up. So: Why, in this day and age, do those in the US, when writing for an international audience, still use mm/dd/yyyy? (And I'll add another one: Why do companies in the US find it impossible to ship outside the US? It's very odd) OK, back to hitting refresh several times a second waiting for Team Services to come back online.
cheers Chris Maunder
Time is a slippery beast. You think you have it figured out, then stuff like this comes up. I guess that's why we're paid the big $? :)
-
We have decent coffee now. Those Central/South American puppet dictatorships needed to be put to useful work (for us), and cocaine and bananas weren't keeping them busy enough.
-
Just how often do you need your left to change gear, and how often do you need your right to show the guy overtaking you what you think of him? See? ;) Also, I rather use my strong right hand to pull the handbrake when I do a U-turn at full speed :cool: On a more serious note, many cars nowadays have automatic transmission, and most have power assisted steering. Boring :zzz:
GOTOs are a bit like wire coat hangers: they tend to breed in the darkness, such that where there once were few, eventually there are many, and the program's architecture collapses beneath them. (Fran Poretto)
American cars almost all have automatic gearboxes, but that's only because the daft sods kept taking their stronger hand off the wheel to change gears!
I wanna be a eunuchs developer! Pass me a bread knife!
-
Oh, and Micronesia. At least according to Wikipedia. So why does pretty much every US based service that caters to a worldwide audience use mm/dd/yyyy as a date format Latest example this hour is VS team services "Access issues with Visual Studio Team Services – 5/25 – Investigating". 5/25 = 25 May. That's easy. But when I see 6/7 or 10/8 I have to manually check the site and see what culture they are based in. No one in the US (I'm guessing - apart from ex-pats) worry about this. Or are probably even aware of this issue. Everyone else in every other country is aware of this issue. Everyone in Canada manages to deal with it. And I don't know how their brains don't explode. Canada uses dd/mm/yyyy. Except when it uses mm/dd/yyyy because either it's a US based company, they are using a US based system, they are trying to be nice to their US based customers, because they just forgot to use dd/mm/yyyy or because they know it's me and so they deliberately use an ambiguous date format to do my head in. Date formats in Canada are totally and completely messed up. So: Why, in this day and age, do those in the US, when writing for an international audience, still use mm/dd/yyyy? (And I'll add another one: Why do companies in the US find it impossible to ship outside the US? It's very odd) OK, back to hitting refresh several times a second waiting for Team Services to come back online.
cheers Chris Maunder
We have many international customers (I'm in the US). I've been aware of the issue a long time and my tendency is to write the name of the month. Even so, I tend to write either 2016 May 26 or 26 May 2016. Is anyone aware of ISO 8601, the international standard on date and time? It promotes the YYYY-MM-DD format as well as 24-hour time HH:MM (another thing the US does not use as much as many other countries). We still have one program running here that I wrote in 1991 for a DOS-based process control. It also logged temperature from different thermistors (fed to an ADC). The log file had a YYMMDD.log style name.
-
So what's this "fourth of July" thing I keep hearing about?
cheers Chris Maunder
Chris- That's easy, the "Fourth of July" (or Independence Day) is celebrated on July fourth! Also, good tea is widely available here. Typically I choose Twinings.
-
In Mumbai they drive on any part of the road that's free. I may not last forever but the mess I leave behind certainly will.
-
Forogar wrote:
Actually, I like the coffee.
You're right, the coffee's good. It's a good cup of tea that is impossible to find anywhere. Serves them right for ditching in Boston harbour.
Quote:
a good cup of tea that is impossible to find
Too true! Until I moved to the US I mostly drank tea, now I mostly drink coffee, not because I like coffee better but because good tea is only available when I make it myself from re-imported tea from the UK!
- I would love to change the world, but they won’t give me the source code.
-
Quote:
mm/dd/yyyy is the way it is spoken in English: "April 1st, 2051"
Actually, it's the way Americans say it. Apparently, European English speakers would say "The 1st of April, 2051".
Truth, James
Wouldn't that be the Calends of April? :suss:
_______________________________________________________________ Ah don't lean on me man, cause you can't afford the ticket
-
Oh, and Micronesia. At least according to Wikipedia. So why does pretty much every US based service that caters to a worldwide audience use mm/dd/yyyy as a date format Latest example this hour is VS team services "Access issues with Visual Studio Team Services – 5/25 – Investigating". 5/25 = 25 May. That's easy. But when I see 6/7 or 10/8 I have to manually check the site and see what culture they are based in. No one in the US (I'm guessing - apart from ex-pats) worry about this. Or are probably even aware of this issue. Everyone else in every other country is aware of this issue. Everyone in Canada manages to deal with it. And I don't know how their brains don't explode. Canada uses dd/mm/yyyy. Except when it uses mm/dd/yyyy because either it's a US based company, they are using a US based system, they are trying to be nice to their US based customers, because they just forgot to use dd/mm/yyyy or because they know it's me and so they deliberately use an ambiguous date format to do my head in. Date formats in Canada are totally and completely messed up. So: Why, in this day and age, do those in the US, when writing for an international audience, still use mm/dd/yyyy? (And I'll add another one: Why do companies in the US find it impossible to ship outside the US? It's very odd) OK, back to hitting refresh several times a second waiting for Team Services to come back online.
cheers Chris Maunder