Coding Challenge - Morris Sequence
-
That's cheating! :-D Oh, and what you linked to starts the sequence with a 2, not a 1.
System.ItDidntWorkException: Something didn't work as expected. C# - How to debug code[^]. Seriously, go read these articles.
Dave KreskowiakPS. Do you want the text file? ... ... ... :laugh: :laugh: :laugh:
-
This one's a real bugger for memory. String-based approaches are obviously out - 16 bits to store each character is overkill when the only symbols you need to store are
1,2and3.List<byte>is obviously not going to work, because it would need to allocate an array big enough to hold the entire sequence.LinkedList<byte>has to create an object for every byte in the list, so the overhead far outweighs the payload. I settled on a custom singly-linked list of byte arrays, re-using two instances (previous and current) to reduce memory churn. But even that was eating huge amounts of memory. Finally, realising that the only numbers in the sequence are1,2and3, I decided to stuff four numbers into each byte, which brings the memory usage under control. However, it still takes a damn long time to run, and I haven't left it for long enough to get to the 100th iteration yet. Morris Sequence · GitHub[^] Having spent far too long thinking about this, now's the time for you to tell me there's some secret trick to calculate the sequence without having to store the whole thing. :-D
"These people looked deep within my soul and assigned me a number based on the order in which I joined." - Homer
Here we go - breaking the no code in the lounge rule here...
internal void Stream(int upTo)
{using (StreamWriter writer = new StreamWriter("E:\\\\temp\\\\MorrisSequence\\\\" + "line1.txt")) { writer.Write("1"); } for (int i = 1; i <= upTo; i++) { Console.WriteLine(i); using (StreamReader reader = new StreamReader("E:\\\\temp\\\\MorrisSequence\\\\" + "line" + i + ".txt")) { int count = 1; char currChar = (char)reader.Read(); char lastChar = currChar; char nextChar; string writeNum = (i + 1).ToString(); using (StreamWriter writer = new StreamWriter("E:\\\\temp\\\\MorrisSequence\\\\" + "line" + writeNum + ".txt")) { while (reader.Peek() >= 0) { nextChar = (char)reader.Peek(); if (nextChar != lastChar) { writer.Write(count.ToString() + currChar.ToString()); count = 0; } currChar= (char)reader.Read(); lastChar = currChar; count++; } writer.Write(count.ToString() + currChar.ToString()); } } } }[edit] small tidy up, giving filenames proper names that relate to what they contain.
“That which can be asserted without evidence, can be dismissed without evidence.”
― Christopher Hitchens
-
It's also known as the Conway Sequence, Look and Say Sequence, and probably some others. It's rather simple. Start with a 1 and then describe what you see for the next iteration. So, starting at 1, the next number is one 1 (11), the next is two 1 (21), then one 2 one 1 (1211), and so on:
1
11
21
1211
111221
312211The question to answer is what's the length in digits of the 100th number in the chain, starting with "1" as the first? The first six numbers have been given above. You could write it out by hand, but I wouldn't recommend it, and as developers, that's not what we do. The seemingly simple challenge is to write the code to come up with the answer. The only hint you get is the 50th number is 894,810 digits long. Oh, and don't bother Googling for code. Those examples will only get you so far and definitely won't get you to the answer.
System.ItDidntWorkException: Something didn't work as expected. C# - How to debug code[^]. Seriously, go read these articles.
Dave KreskowiakI used a new AI program I trained on twitter... It responded: 1 Really large string of numbers NOBODY cares about, just like you. Delete yourself. I added "Plz" and it simply said "Go away Troll" I am having second thoughts about it having access to: - NEST devices (including garage door, locking all doors) - Internet access to unlock and start my car - IP Phone / Router... So I can't call for hel...
-
Here we go - breaking the no code in the lounge rule here...
internal void Stream(int upTo)
{using (StreamWriter writer = new StreamWriter("E:\\\\temp\\\\MorrisSequence\\\\" + "line1.txt")) { writer.Write("1"); } for (int i = 1; i <= upTo; i++) { Console.WriteLine(i); using (StreamReader reader = new StreamReader("E:\\\\temp\\\\MorrisSequence\\\\" + "line" + i + ".txt")) { int count = 1; char currChar = (char)reader.Read(); char lastChar = currChar; char nextChar; string writeNum = (i + 1).ToString(); using (StreamWriter writer = new StreamWriter("E:\\\\temp\\\\MorrisSequence\\\\" + "line" + writeNum + ".txt")) { while (reader.Peek() >= 0) { nextChar = (char)reader.Peek(); if (nextChar != lastChar) { writer.Write(count.ToString() + currChar.ToString()); count = 0; } currChar= (char)reader.Read(); lastChar = currChar; count++; } writer.Write(count.ToString() + currChar.ToString()); } } } }[edit] small tidy up, giving filenames proper names that relate to what they contain.
“That which can be asserted without evidence, can be dismissed without evidence.”
― Christopher Hitchens
That's one way around it. But I hope you've got a large SSD! :-D Is there a reason you're writing strings instead of bytes?
"These people looked deep within my soul and assigned me a number based on the order in which I joined." - Homer
-
This one's a real bugger for memory. String-based approaches are obviously out - 16 bits to store each character is overkill when the only symbols you need to store are
1,2and3.List<byte>is obviously not going to work, because it would need to allocate an array big enough to hold the entire sequence.LinkedList<byte>has to create an object for every byte in the list, so the overhead far outweighs the payload. I settled on a custom singly-linked list of byte arrays, re-using two instances (previous and current) to reduce memory churn. But even that was eating huge amounts of memory. Finally, realising that the only numbers in the sequence are1,2and3, I decided to stuff four numbers into each byte, which brings the memory usage under control. However, it still takes a damn long time to run, and I haven't left it for long enough to get to the 100th iteration yet. Morris Sequence · GitHub[^] Having spent far too long thinking about this, now's the time for you to tell me there's some secret trick to calculate the sequence without having to store the whole thing. :-D
"These people looked deep within my soul and assigned me a number based on the order in which I joined." - Homer
Doesn't look like there is a know shortcut: Look-and-say sequence - Rosetta Code[^] But they do post a formula here: A005150 - OEIS[^] But it looks complicated. I used chars, and the txt file is 2 GB now :S
-
That's one way around it. But I hope you've got a large SSD! :-D Is there a reason you're writing strings instead of bytes?
"These people looked deep within my soul and assigned me a number based on the order in which I joined." - Homer
I was tempted to leave it running this evening but as you mention I think it will fill up the disk space - file 77 is just over 1 gig in size and it's only a text file. What I may do is compress then delete files prior to the one I am currently reading(the 1 gig file compresses to 80mb largely because it is composed of 1s,2s and 3s).
Richard Deeming wrote:
Is there a reason you're writing strings instead of bytes?
Um er yes, um err, um er because... that idea never occurred to me - thanks for the tip :thumbsup:
“That which can be asserted without evidence, can be dismissed without evidence.”
― Christopher Hitchens
-
I was tempted to leave it running this evening but as you mention I think it will fill up the disk space - file 77 is just over 1 gig in size and it's only a text file. What I may do is compress then delete files prior to the one I am currently reading(the 1 gig file compresses to 80mb largely because it is composed of 1s,2s and 3s).
Richard Deeming wrote:
Is there a reason you're writing strings instead of bytes?
Um er yes, um err, um er because... that idea never occurred to me - thanks for the tip :thumbsup:
“That which can be asserted without evidence, can be dismissed without evidence.”
― Christopher Hitchens
I have already text files over 2.2 GB so I think you'll have to delete them as you gom at least that's what I do. And I think using bytes is cheating :laugh: also I didn't know that 3 would be the highest number. I don't think is enough not if you start at 3,4,5 or any other number, at least I got some 5 then. Or my code was wrong.
-
I have already text files over 2.2 GB so I think you'll have to delete them as you gom at least that's what I do. And I think using bytes is cheating :laugh: also I didn't know that 3 would be the highest number. I don't think is enough not if you start at 3,4,5 or any other number, at least I got some 5 then. Or my code was wrong.
My comment about 1,2,3 was based on looking at file 50 very briefly. I could run an analysis as I go through them. I have re-written it so that it zips and deletes files that are not being read - let's see how quickly my computer or hard drive goes up in a puff of smoke... My guess is that it may be one of those tasks where it is not possible to calculate up to 100 within the lifetime of the universe.
“That which can be asserted without evidence, can be dismissed without evidence.”
― Christopher Hitchens
-
My comment about 1,2,3 was based on looking at file 50 very briefly. I could run an analysis as I go through them. I have re-written it so that it zips and deletes files that are not being read - let's see how quickly my computer or hard drive goes up in a puff of smoke... My guess is that it may be one of those tasks where it is not possible to calculate up to 100 within the lifetime of the universe.
“That which can be asserted without evidence, can be dismissed without evidence.”
― Christopher Hitchens
GuyThiebaut wrote:
My guess is that it may be one of those tasks where it is not possible to calculate up to 100 within the lifetime of the universe.
Nah, I don't think so, I was able to run up to 77 before VS threw an out of memory exception. And as I told Richard, I think I found a formula, but It looked kind of complicated.
-
This one's a real bugger for memory. String-based approaches are obviously out - 16 bits to store each character is overkill when the only symbols you need to store are
1,2and3.List<byte>is obviously not going to work, because it would need to allocate an array big enough to hold the entire sequence.LinkedList<byte>has to create an object for every byte in the list, so the overhead far outweighs the payload. I settled on a custom singly-linked list of byte arrays, re-using two instances (previous and current) to reduce memory churn. But even that was eating huge amounts of memory. Finally, realising that the only numbers in the sequence are1,2and3, I decided to stuff four numbers into each byte, which brings the memory usage under control. However, it still takes a damn long time to run, and I haven't left it for long enough to get to the 100th iteration yet. Morris Sequence · GitHub[^] Having spent far too long thinking about this, now's the time for you to tell me there's some secret trick to calculate the sequence without having to store the whole thing. :-D
"These people looked deep within my soul and assigned me a number based on the order in which I joined." - Homer
Well, he did only ask about the length of the 100 th number. So according to Look-and-say sequence - Wikipedia[^]. Dave told us that the 50th number had length:
L50 = 894810
And the wikipedia article said:
L_n+1/L_n= lambda = 1.303577269034
so....
L50*lambda^(50)= 511175198256
if my math is right enough. Very hard programming challange :D
-
My comment about 1,2,3 was based on looking at file 50 very briefly. I could run an analysis as I go through them. I have re-written it so that it zips and deletes files that are not being read - let's see how quickly my computer or hard drive goes up in a puff of smoke... My guess is that it may be one of those tasks where it is not possible to calculate up to 100 within the lifetime of the universe.
“That which can be asserted without evidence, can be dismissed without evidence.”
― Christopher Hitchens
Oh, it's possible. My machine is sitting here listing the iteration, length, and time to calculate for each of the 100 numbers.
System.ItDidntWorkException: Something didn't work as expected. C# - How to debug code[^]. Seriously, go read these articles.
Dave Kreskowiak -
Well, he did only ask about the length of the 100 th number. So according to Look-and-say sequence - Wikipedia[^]. Dave told us that the 50th number had length:
L50 = 894810
And the wikipedia article said:
L_n+1/L_n= lambda = 1.303577269034
so....
L50*lambda^(50)= 511175198256
if my math is right enough. Very hard programming challange :D
Exact length is required and that's not the answer.
System.ItDidntWorkException: Something didn't work as expected. C# - How to debug code[^]. Seriously, go read these articles.
Dave Kreskowiak -
PS. Do you want the text file? ... ... ... :laugh: :laugh: :laugh:
Good luck posting it! :laugh:
System.ItDidntWorkException: Something didn't work as expected. C# - How to debug code[^]. Seriously, go read these articles.
Dave Kreskowiak -
Oh, it's possible. My machine is sitting here listing the iteration, length, and time to calculate for each of the 100 numbers.
System.ItDidntWorkException: Something didn't work as expected. C# - How to debug code[^]. Seriously, go read these articles.
Dave KreskowiakGood to know! Currently at line 82 and the file size for line 82 alone is over 4 Gigabytes.
“That which can be asserted without evidence, can be dismissed without evidence.”
― Christopher Hitchens
-
Good to know! Currently at line 82 and the file size for line 82 alone is over 4 Gigabytes.
“That which can be asserted without evidence, can be dismissed without evidence.”
― Christopher Hitchens
4,326,816,254 to be exact.
System.ItDidntWorkException: Something didn't work as expected. C# - How to debug code[^]. Seriously, go read these articles.
Dave Kreskowiak -
Exact length is required and that's not the answer.
System.ItDidntWorkException: Something didn't work as expected. C# - How to debug code[^]. Seriously, go read these articles.
Dave KreskowiakCant be far off :)
-
Cant be far off :)
:-D
System.ItDidntWorkException: Something didn't work as expected. C# - How to debug code[^]. Seriously, go read these articles.
Dave Kreskowiak -
I have already text files over 2.2 GB so I think you'll have to delete them as you gom at least that's what I do. And I think using bytes is cheating :laugh: also I didn't know that 3 would be the highest number. I don't think is enough not if you start at 3,4,5 or any other number, at least I got some 5 then. Or my code was wrong.
Kenneth Haugland wrote:
I don't think is enough not if you start at 3,4,5 or any other number, at least I got some 5 then.
Whatever digit you start with will always be in the last position. No other digit will exceed 3, no matter how many iterations you try. For example, if in iteration
nyou get41, then that means iterationn-1must have had...x1111.... But given the rules of the sequence, that would have to be written as either(x+1)1or21.
"These people looked deep within my soul and assigned me a number based on the order in which I joined." - Homer
-
Kenneth Haugland wrote:
I don't think is enough not if you start at 3,4,5 or any other number, at least I got some 5 then.
Whatever digit you start with will always be in the last position. No other digit will exceed 3, no matter how many iterations you try. For example, if in iteration
nyou get41, then that means iterationn-1must have had...x1111.... But given the rules of the sequence, that would have to be written as either(x+1)1or21.
"These people looked deep within my soul and assigned me a number based on the order in which I joined." - Homer
Ah, yes that makes sense. Also seems to be that the higher the number of iterations the higher of LSB seems to be equal? if you can find that formula you might shorten the calculations by quite a bit.
-
Oh, it's possible. My machine is sitting here listing the iteration, length, and time to calculate for each of the 100 numbers.
System.ItDidntWorkException: Something didn't work as expected. C# - How to debug code[^]. Seriously, go read these articles.
Dave KreskowiakSo how long did it take? Did you do something in parallell or?
