Long Lines
-
Sometimes you find yourself writing a stupidly long line of code, in my case:
OutputImage(file, allFaces.Where(f => f.Proportion > double.Parse(ConfigurationManager.AppSettings["LowerBound"].ToString()) && f.Proportion < double.Parse(ConfigurationManager.AppSettings["UpperBound"].ToString())).ToList().OrderBy(f => f.Proportion).ThenByDescending(f => f.Rectangle.Height).FirstOrDefault());
That will auto-wrap on here but you get the idea. Well, obviously I can shorten that line (but lengthen the code slightly) by splitting out the config setting retrievals:
double lowerBound = double.Parse(ConfigurationManager.AppSettings["LowerBound"].ToString());
double upperBound = double.Parse(ConfigurationManager.AppSettings["UpperBound"].ToString());reducing the "offending" line to:
OutputImage(file, allFaces.Where(f => f.Proportion > lowerBound && f.Proportion < upperBound).ToList().OrderBy(f => f.Proportion).ThenByDescending(f => f.Rectangle.Height).FirstOrDefault());
But given that I'm not using those settings more than once, should I really be doing that? Two short-lived variables aren't going to make too much difference but I'm still doing it for cosmetic reasons and that can't be good ... Either way, it's easy enough to split a method call where there are half a ton of arguments over several lines of text but what about when it's just one of the arguments that's causing the thing to scroll for miles? (Lambdas being a common cause of this). Hardly a matter of life and death but I'd be interested to hear the thoughts of others on this.
Whenever you find yourself on the side of the majority, it is time to pause and reflect. - Mark Twain
I'd do nothing of the sort. Long-ass lines like that make the code harder to read, maintain, and debug. I'd bust the individual components out to their own variables and combine them in the final statement. When you compile for Release, all that gets optimized out in most cases. You're really not saving yourself anything by piling it all into a single statement.
Asking questions is a skill CodeProject Forum Guidelines Google: C# How to debug code Seriously, go read these articles.
Dave Kreskowiak -
Sometimes you find yourself writing a stupidly long line of code, in my case:
OutputImage(file, allFaces.Where(f => f.Proportion > double.Parse(ConfigurationManager.AppSettings["LowerBound"].ToString()) && f.Proportion < double.Parse(ConfigurationManager.AppSettings["UpperBound"].ToString())).ToList().OrderBy(f => f.Proportion).ThenByDescending(f => f.Rectangle.Height).FirstOrDefault());
That will auto-wrap on here but you get the idea. Well, obviously I can shorten that line (but lengthen the code slightly) by splitting out the config setting retrievals:
double lowerBound = double.Parse(ConfigurationManager.AppSettings["LowerBound"].ToString());
double upperBound = double.Parse(ConfigurationManager.AppSettings["UpperBound"].ToString());reducing the "offending" line to:
OutputImage(file, allFaces.Where(f => f.Proportion > lowerBound && f.Proportion < upperBound).ToList().OrderBy(f => f.Proportion).ThenByDescending(f => f.Rectangle.Height).FirstOrDefault());
But given that I'm not using those settings more than once, should I really be doing that? Two short-lived variables aren't going to make too much difference but I'm still doing it for cosmetic reasons and that can't be good ... Either way, it's easy enough to split a method call where there are half a ton of arguments over several lines of text but what about when it's just one of the arguments that's causing the thing to scroll for miles? (Lambdas being a common cause of this). Hardly a matter of life and death but I'd be interested to hear the thoughts of others on this.
Whenever you find yourself on the side of the majority, it is time to pause and reflect. - Mark Twain
PeejayAdams wrote:
Two short-lived variables aren't going to make too much difference but I'm still doing it for cosmetic reasons and that can't be good
You're not doing it for cosmetic reasons. You're doing it to improve code clarity. And that, IMHO, has huge value. /ravi
My new year resolution: 2048 x 1536 Home | Articles | My .NET bits | Freeware ravib(at)ravib(dot)com
-
Sometimes you find yourself writing a stupidly long line of code, in my case:
OutputImage(file, allFaces.Where(f => f.Proportion > double.Parse(ConfigurationManager.AppSettings["LowerBound"].ToString()) && f.Proportion < double.Parse(ConfigurationManager.AppSettings["UpperBound"].ToString())).ToList().OrderBy(f => f.Proportion).ThenByDescending(f => f.Rectangle.Height).FirstOrDefault());
That will auto-wrap on here but you get the idea. Well, obviously I can shorten that line (but lengthen the code slightly) by splitting out the config setting retrievals:
double lowerBound = double.Parse(ConfigurationManager.AppSettings["LowerBound"].ToString());
double upperBound = double.Parse(ConfigurationManager.AppSettings["UpperBound"].ToString());reducing the "offending" line to:
OutputImage(file, allFaces.Where(f => f.Proportion > lowerBound && f.Proportion < upperBound).ToList().OrderBy(f => f.Proportion).ThenByDescending(f => f.Rectangle.Height).FirstOrDefault());
But given that I'm not using those settings more than once, should I really be doing that? Two short-lived variables aren't going to make too much difference but I'm still doing it for cosmetic reasons and that can't be good ... Either way, it's easy enough to split a method call where there are half a ton of arguments over several lines of text but what about when it's just one of the arguments that's causing the thing to scroll for miles? (Lambdas being a common cause of this). Hardly a matter of life and death but I'd be interested to hear the thoughts of others on this.
Whenever you find yourself on the side of the majority, it is time to pause and reflect. - Mark Twain
I never used to worry about long lines but since I now use a wide screen monitor in portrait mode for editing I find scrolling right so annoying! In addition we used side by side code display for comparison during code reviews so shorter lines are better. Splitting after "(", ",", ".", "=>" and occasionally "=" really helps but keeps the code easily readable. I even adopted this style at home where there are no code reviewers beyond me.
- I would love to change the world, but they won’t give me the source code.
-
That's the one I'd go with too. Except I'd put the dots on the new line:
OutputImage(file,
allFaces.Where(f => f.Proportion > lowerBound &&
f.Proportion < upperBound)
.ToList()
.OrderBy(f => f.Proportion)
.ThenByDescending(f => f.Rectangle.Height)
.FirstOrDefault());"I have no idea what I did, but I'm taking full credit for it." - ThisOldTony AntiTwitter: @DalekDave is now a follower!
That's the way I do it. Except I move the && (or ||) to the start of the next line instead of leaving it trailing - it often helps when I want to comment out an option or two temporarily while testing.
- I would love to change the world, but they won’t give me the source code.
-
Sometimes you find yourself writing a stupidly long line of code, in my case:
OutputImage(file, allFaces.Where(f => f.Proportion > double.Parse(ConfigurationManager.AppSettings["LowerBound"].ToString()) && f.Proportion < double.Parse(ConfigurationManager.AppSettings["UpperBound"].ToString())).ToList().OrderBy(f => f.Proportion).ThenByDescending(f => f.Rectangle.Height).FirstOrDefault());
That will auto-wrap on here but you get the idea. Well, obviously I can shorten that line (but lengthen the code slightly) by splitting out the config setting retrievals:
double lowerBound = double.Parse(ConfigurationManager.AppSettings["LowerBound"].ToString());
double upperBound = double.Parse(ConfigurationManager.AppSettings["UpperBound"].ToString());reducing the "offending" line to:
OutputImage(file, allFaces.Where(f => f.Proportion > lowerBound && f.Proportion < upperBound).ToList().OrderBy(f => f.Proportion).ThenByDescending(f => f.Rectangle.Height).FirstOrDefault());
But given that I'm not using those settings more than once, should I really be doing that? Two short-lived variables aren't going to make too much difference but I'm still doing it for cosmetic reasons and that can't be good ... Either way, it's easy enough to split a method call where there are half a ton of arguments over several lines of text but what about when it's just one of the arguments that's causing the thing to scroll for miles? (Lambdas being a common cause of this). Hardly a matter of life and death but I'd be interested to hear the thoughts of others on this.
Whenever you find yourself on the side of the majority, it is time to pause and reflect. - Mark Twain
double lowerBound = double.Parse(ConfigurationManager.AppSettings["LowerBound"].ToString());
double upperBound = double.Parse(ConfigurationManager.AppSettings["UpperBound"].ToString());In my opinion this way would be better so that you can have error checking on it and provide a meaningful error message if one of the Appsettings is invalid.
Social Media - A platform that makes it easier for the crazies to find each other. Everyone is born right handed. Only the strongest overcome it. Fight for left-handed rights and hand equality.
-
Strange. Much of my code looks like this:
Quote:
SEX R6 BN4 LOOP INP 04 OUT 04 B4 LOOP LDA R6 SDI 0F BNE LOOP NOP
The lines don't get too long, even if I use the old 64 x 64 pixel screen resolution. :-)
I have lived with several Zen masters - all of them were cats. His last invention was an evil Lasagna. It didn't kill anyone, and it actually tasted pretty good.
-
Sometimes you find yourself writing a stupidly long line of code, in my case:
OutputImage(file, allFaces.Where(f => f.Proportion > double.Parse(ConfigurationManager.AppSettings["LowerBound"].ToString()) && f.Proportion < double.Parse(ConfigurationManager.AppSettings["UpperBound"].ToString())).ToList().OrderBy(f => f.Proportion).ThenByDescending(f => f.Rectangle.Height).FirstOrDefault());
That will auto-wrap on here but you get the idea. Well, obviously I can shorten that line (but lengthen the code slightly) by splitting out the config setting retrievals:
double lowerBound = double.Parse(ConfigurationManager.AppSettings["LowerBound"].ToString());
double upperBound = double.Parse(ConfigurationManager.AppSettings["UpperBound"].ToString());reducing the "offending" line to:
OutputImage(file, allFaces.Where(f => f.Proportion > lowerBound && f.Proportion < upperBound).ToList().OrderBy(f => f.Proportion).ThenByDescending(f => f.Rectangle.Height).FirstOrDefault());
But given that I'm not using those settings more than once, should I really be doing that? Two short-lived variables aren't going to make too much difference but I'm still doing it for cosmetic reasons and that can't be good ... Either way, it's easy enough to split a method call where there are half a ton of arguments over several lines of text but what about when it's just one of the arguments that's causing the thing to scroll for miles? (Lambdas being a common cause of this). Hardly a matter of life and death but I'd be interested to hear the thoughts of others on this.
Whenever you find yourself on the side of the majority, it is time to pause and reflect. - Mark Twain
Macros for the win. :cool:
-
Sometimes you find yourself writing a stupidly long line of code, in my case:
OutputImage(file, allFaces.Where(f => f.Proportion > double.Parse(ConfigurationManager.AppSettings["LowerBound"].ToString()) && f.Proportion < double.Parse(ConfigurationManager.AppSettings["UpperBound"].ToString())).ToList().OrderBy(f => f.Proportion).ThenByDescending(f => f.Rectangle.Height).FirstOrDefault());
That will auto-wrap on here but you get the idea. Well, obviously I can shorten that line (but lengthen the code slightly) by splitting out the config setting retrievals:
double lowerBound = double.Parse(ConfigurationManager.AppSettings["LowerBound"].ToString());
double upperBound = double.Parse(ConfigurationManager.AppSettings["UpperBound"].ToString());reducing the "offending" line to:
OutputImage(file, allFaces.Where(f => f.Proportion > lowerBound && f.Proportion < upperBound).ToList().OrderBy(f => f.Proportion).ThenByDescending(f => f.Rectangle.Height).FirstOrDefault());
But given that I'm not using those settings more than once, should I really be doing that? Two short-lived variables aren't going to make too much difference but I'm still doing it for cosmetic reasons and that can't be good ... Either way, it's easy enough to split a method call where there are half a ton of arguments over several lines of text but what about when it's just one of the arguments that's causing the thing to scroll for miles? (Lambdas being a common cause of this). Hardly a matter of life and death but I'd be interested to hear the thoughts of others on this.
Whenever you find yourself on the side of the majority, it is time to pause and reflect. - Mark Twain
Create an arguments class and pass that it. Then, when arguments changes (not 'if', but 'when'), then the method's signature stays the same.
If it's not broken, fix it until it is. Everything makes sense in someone's mind. Ya can't fix stupid.
-
I never used to worry about long lines but since I now use a wide screen monitor in portrait mode for editing I find scrolling right so annoying! In addition we used side by side code display for comparison during code reviews so shorter lines are better. Splitting after "(", ",", ".", "=>" and occasionally "=" really helps but keeps the code easily readable. I even adopted this style at home where there are no code reviewers beyond me.
- I would love to change the world, but they won’t give me the source code.
Splitting _before_ operators tends to help them stand out.
-
Splitting _before_ operators tends to help them stand out.
-
Just setting the X register to a new value. This means that the value in register 6 is now the new stack pointer.
I have lived with several Zen masters - all of them were cats. His last invention was an evil Lasagna. It didn't kill anyone, and it actually tasted pretty good.
-
Sometimes you find yourself writing a stupidly long line of code, in my case:
OutputImage(file, allFaces.Where(f => f.Proportion > double.Parse(ConfigurationManager.AppSettings["LowerBound"].ToString()) && f.Proportion < double.Parse(ConfigurationManager.AppSettings["UpperBound"].ToString())).ToList().OrderBy(f => f.Proportion).ThenByDescending(f => f.Rectangle.Height).FirstOrDefault());
That will auto-wrap on here but you get the idea. Well, obviously I can shorten that line (but lengthen the code slightly) by splitting out the config setting retrievals:
double lowerBound = double.Parse(ConfigurationManager.AppSettings["LowerBound"].ToString());
double upperBound = double.Parse(ConfigurationManager.AppSettings["UpperBound"].ToString());reducing the "offending" line to:
OutputImage(file, allFaces.Where(f => f.Proportion > lowerBound && f.Proportion < upperBound).ToList().OrderBy(f => f.Proportion).ThenByDescending(f => f.Rectangle.Height).FirstOrDefault());
But given that I'm not using those settings more than once, should I really be doing that? Two short-lived variables aren't going to make too much difference but I'm still doing it for cosmetic reasons and that can't be good ... Either way, it's easy enough to split a method call where there are half a ton of arguments over several lines of text but what about when it's just one of the arguments that's causing the thing to scroll for miles? (Lambdas being a common cause of this). Hardly a matter of life and death but I'd be interested to hear the thoughts of others on this.
Whenever you find yourself on the side of the majority, it is time to pause and reflect. - Mark Twain
PeejayAdams wrote:
Two short-lived variables
Lifetime should not influence readability. I almost always put things into variables not just for readability but that it makes it easier to debug. Given:
OutputImage(file, allFaces.Where(f => f.Proportion > double.Parse(ConfigurationManager.AppSettings["LowerBound"].ToString()) && f.Proportion < double.Parse(ConfigurationManager.AppSettings["UpperBound"].ToString())).ToList().OrderBy(f => f.Proportion).ThenByDescending(f => f.Rectangle.Height).FirstOrDefault());
I do have a penchant for extension methods. As in:
var face = allFaces
.AnyBetween(f => f.Proportion, "LowerBound".AppSetting().to_f(), "UpperBound".AppSetting().to_f())
.OrderBy(f => f.Proportion)
.ThenByDescending(f => f.Rectangle.Height)
.FirstOrDefault();
OutputImage(file, face);As bizarre as it is to extend
string, I find it a lot more readable. TheToList()seems superfluous. Not sure you want to output an image if no images meet the selection criteria. I might moveFirstOrDefaultintoOutputImage(file, face.FirstOrDefault());as well, who knows, the way you get the faces might be re-usable. I leave it to the reader to figure outto_f,AnyBetween, andAppSettingsShould be obvious.Latest Articles:
Client-Side TypeScript without ASP.NET, Angular, etc. -
That's the one I'd go with too. Except I'd put the dots on the new line:
OutputImage(file,
allFaces.Where(f => f.Proportion > lowerBound &&
f.Proportion < upperBound)
.ToList()
.OrderBy(f => f.Proportion)
.ThenByDescending(f => f.Rectangle.Height)
.FirstOrDefault());"I have no idea what I did, but I'm taking full credit for it." - ThisOldTony AntiTwitter: @DalekDave is now a follower!
That's my preference as well, unless I'm still debugging the code, and I want to verify the output of one of the chained calls. Otherwise setting a breakpoint, say, on line 6 sets a breakpoint on the entire thing. But once I'm confident I won't have to revisit it, it all goes back to a single statement split among multiple lines.
-
I'd do nothing of the sort. Long-ass lines like that make the code harder to read, maintain, and debug. I'd bust the individual components out to their own variables and combine them in the final statement. When you compile for Release, all that gets optimized out in most cases. You're really not saving yourself anything by piling it all into a single statement.
Asking questions is a skill CodeProject Forum Guidelines Google: C# How to debug code Seriously, go read these articles.
Dave Kreskowiak -
Just setting the X register to a new value. This means that the value in register 6 is now the new stack pointer.
I have lived with several Zen masters - all of them were cats. His last invention was an evil Lasagna. It didn't kill anyone, and it actually tasted pretty good.
I think Richard was making a joke.
What do you get when you cross a joke with a rhetorical question? The metaphorical solid rear-end expulsions have impacted the metaphorical motorized bladed rotating air movement mechanism. Do questions with multiple question marks annoy you???
-
Strange. Much of my code looks like this:
Quote:
SEX R6 BN4 LOOP INP 04 OUT 04 B4 LOOP LDA R6 SDI 0F BNE LOOP NOP
The lines don't get too long, even if I use the old 64 x 64 pixel screen resolution. :-)
I have lived with several Zen masters - all of them were cats. His last invention was an evil Lasagna. It didn't kill anyone, and it actually tasted pretty good.
Now that makes me miss programming! :)
Will Rogers never met me.
-
Sometimes you find yourself writing a stupidly long line of code, in my case:
OutputImage(file, allFaces.Where(f => f.Proportion > double.Parse(ConfigurationManager.AppSettings["LowerBound"].ToString()) && f.Proportion < double.Parse(ConfigurationManager.AppSettings["UpperBound"].ToString())).ToList().OrderBy(f => f.Proportion).ThenByDescending(f => f.Rectangle.Height).FirstOrDefault());
That will auto-wrap on here but you get the idea. Well, obviously I can shorten that line (but lengthen the code slightly) by splitting out the config setting retrievals:
double lowerBound = double.Parse(ConfigurationManager.AppSettings["LowerBound"].ToString());
double upperBound = double.Parse(ConfigurationManager.AppSettings["UpperBound"].ToString());reducing the "offending" line to:
OutputImage(file, allFaces.Where(f => f.Proportion > lowerBound && f.Proportion < upperBound).ToList().OrderBy(f => f.Proportion).ThenByDescending(f => f.Rectangle.Height).FirstOrDefault());
But given that I'm not using those settings more than once, should I really be doing that? Two short-lived variables aren't going to make too much difference but I'm still doing it for cosmetic reasons and that can't be good ... Either way, it's easy enough to split a method call where there are half a ton of arguments over several lines of text but what about when it's just one of the arguments that's causing the thing to scroll for miles? (Lambdas being a common cause of this). Hardly a matter of life and death but I'd be interested to hear the thoughts of others on this.
Whenever you find yourself on the side of the majority, it is time to pause and reflect. - Mark Twain
You're my hero. I also find myself writing lines like this. I kinda consider them a guilty pleasure, they may not look nice, but I like them. Started all the way back at the end of my school time, I was in the Maple math class and my teacher always told me to use variables, they're aplenty and free. He kept telling me every single time.
-
Sometimes you find yourself writing a stupidly long line of code, in my case:
OutputImage(file, allFaces.Where(f => f.Proportion > double.Parse(ConfigurationManager.AppSettings["LowerBound"].ToString()) && f.Proportion < double.Parse(ConfigurationManager.AppSettings["UpperBound"].ToString())).ToList().OrderBy(f => f.Proportion).ThenByDescending(f => f.Rectangle.Height).FirstOrDefault());
That will auto-wrap on here but you get the idea. Well, obviously I can shorten that line (but lengthen the code slightly) by splitting out the config setting retrievals:
double lowerBound = double.Parse(ConfigurationManager.AppSettings["LowerBound"].ToString());
double upperBound = double.Parse(ConfigurationManager.AppSettings["UpperBound"].ToString());reducing the "offending" line to:
OutputImage(file, allFaces.Where(f => f.Proportion > lowerBound && f.Proportion < upperBound).ToList().OrderBy(f => f.Proportion).ThenByDescending(f => f.Rectangle.Height).FirstOrDefault());
But given that I'm not using those settings more than once, should I really be doing that? Two short-lived variables aren't going to make too much difference but I'm still doing it for cosmetic reasons and that can't be good ... Either way, it's easy enough to split a method call where there are half a ton of arguments over several lines of text but what about when it's just one of the arguments that's causing the thing to scroll for miles? (Lambdas being a common cause of this). Hardly a matter of life and death but I'd be interested to hear the thoughts of others on this.
Whenever you find yourself on the side of the majority, it is time to pause and reflect. - Mark Twain
In theory, you can write your entire application on a single line. You're writing for people though, not for machines. So yeah, make two separate lines that make it more readable and the compiler will inline them giving you no added memory or performance impacts. I'd probably also do this:
OutputImage(file, allFaces.Where(f => f.Proportion > lowerBound && f.Proportion < upperBound)
.ToList()
.OrderBy(f => f.Proportion)
.ThenByDescending(f => f.Rectangle.Height)
.FirstOrDefault());Best, Sander sanderrossel.com Continuous Integration, Delivery, and Deployment arrgh.js - Bringing LINQ to JavaScript Object-Oriented Programming in C# Succinctly
-
That's my preference as well, unless I'm still debugging the code, and I want to verify the output of one of the chained calls. Otherwise setting a breakpoint, say, on line 6 sets a breakpoint on the entire thing. But once I'm confident I won't have to revisit it, it all goes back to a single statement split among multiple lines.
When lines become long, I split before a binary operator, and make sure that binary operators always are in the same line, or, if the line is split, in the same column as the parentheses, if there are any. In addition, I usually put like binary operators in the same column. If a line is split at a binary operator, I indent both operands by the same amount, e.g. two characters to the right. Like so:
OutputImage
( file
, allFaces
. Where
( f
=> f.Proportion
> double.Parse(ConfigurationManager.AppSettings["LowerBound"].ToString())
&& f.Proportion
< double.Parse(ConfigurationManager.AppSettings["UpperBound"].ToString())
)
. ToList()
. OrderBy(f => f.Proportion)
. ThenByDescending(f => f.Rectangle.Height)
. FirstOrDefault()
); -
I'd split it as you have done to improve readability and not worry about short-lived variables, the compiler optimisation will take care of that and in-line your code for you.
Yes, I'd agree with that.
Whenever you find yourself on the side of the majority, it is time to pause and reflect. - Mark Twain
