Aren't USB-C plugs meant to be symmetrical?
-
I've optimised my monitor / mouse / keyboard / zoom camera / phone charger / other phone charger / watch charger / headphone charger / zoom lamp setup so it's all neatly cabled to the back of my monitor. To do this I needed a USB-C extension cable. It mostly worked. Except for the mouse. OK: everything except the mouse. I tested the plugs, I swapped things in and out, I checked the mouse worked when plugged into the laptop directly. Nothing worked. Until I unplugged the USB-C extension cord, twisted it 180 degrees, and plugged it back in. Now it works. This makes no sense to me.
cheers Chris Maunder
-
I've optimised my monitor / mouse / keyboard / zoom camera / phone charger / other phone charger / watch charger / headphone charger / zoom lamp setup so it's all neatly cabled to the back of my monitor. To do this I needed a USB-C extension cable. It mostly worked. Except for the mouse. OK: everything except the mouse. I tested the plugs, I swapped things in and out, I checked the mouse worked when plugged into the laptop directly. Nothing worked. Until I unplugged the USB-C extension cord, twisted it 180 degrees, and plugged it back in. Now it works. This makes no sense to me.
cheers Chris Maunder
Broken wire
-
You have to align the quantum phase interface with the nearest zodiacal node.
Nothing succeeds like a budgie without teeth.
-
I've optimised my monitor / mouse / keyboard / zoom camera / phone charger / other phone charger / watch charger / headphone charger / zoom lamp setup so it's all neatly cabled to the back of my monitor. To do this I needed a USB-C extension cable. It mostly worked. Except for the mouse. OK: everything except the mouse. I tested the plugs, I swapped things in and out, I checked the mouse worked when plugged into the laptop directly. Nothing worked. Until I unplugged the USB-C extension cord, twisted it 180 degrees, and plugged it back in. Now it works. This makes no sense to me.
cheers Chris Maunder
It makes sense if it was dirty... which meant you overloaded the bandwidth but it worked with everything, EXCEPT THE MOUSE.
-
You have to align the quantum phase interface with the nearest zodiacal node.
Nothing succeeds like a budgie without teeth.
You forgot to tangled the Quantum Capacitors and cool the Delithium Crystals. "I canna' change the laws of physics." -- Montgomery "Scotty" Scott
-
Ah you youngsters. I never had such problems with RS-232.
"If we don't change direction, we'll end up where we're going"
As someone who deals with RS232, still, on a very normal basis, don't you remember the null-modem pin swaps? I still carry several DB9 null-modem adapters around with me in my backpack for testing. There is even a meme about it... something along the lines of "don't panic! swap pins 2 and 3 and carry on!" or something. So yes, even rs232 can be "backwards" (unfortunately).
-
As someone who deals with RS232, still, on a very normal basis, don't you remember the null-modem pin swaps? I still carry several DB9 null-modem adapters around with me in my backpack for testing. There is even a meme about it... something along the lines of "don't panic! swap pins 2 and 3 and carry on!" or something. So yes, even rs232 can be "backwards" (unfortunately).
Yeah, I think we had seven different ways of making null modem cables... That was including those on a full 25-pin RS232-plug with all the signals. On the 9-pin connectors, there were not that many alternatives. My experience with them is primarily as a college lecturer: If you ask our students who were CS students in the first half of the 1990, they still remember one single group project: That of implementing a (simplified) Kermit protocol between two PCs, after soldering up a null modem cable. This was their first encounter with multi-process (and even multi-machine) software debugging: It gave them the greatest frustrations of their study years, but also their greatest learning experience.
-
Ah you youngsters. I never had such problems with RS-232.
"If we don't change direction, we'll end up where we're going"
-
I've optimised my monitor / mouse / keyboard / zoom camera / phone charger / other phone charger / watch charger / headphone charger / zoom lamp setup so it's all neatly cabled to the back of my monitor. To do this I needed a USB-C extension cable. It mostly worked. Except for the mouse. OK: everything except the mouse. I tested the plugs, I swapped things in and out, I checked the mouse worked when plugged into the laptop directly. Nothing worked. Until I unplugged the USB-C extension cord, twisted it 180 degrees, and plugged it back in. Now it works. This makes no sense to me.
cheers Chris Maunder
did you try a different cable? If different cable works: then cable might not be properly wired up. If different cable has same issue when flipping: the mouse might not be wired to handle the data and power on the flipped pins. USB-a only has 4 pins. USB-c has 24, 12 doubled. The mouse likely switched from handle micro usb to C, so to save time and a penny cut the need to fully wire up all the pins
-
I've optimised my monitor / mouse / keyboard / zoom camera / phone charger / other phone charger / watch charger / headphone charger / zoom lamp setup so it's all neatly cabled to the back of my monitor. To do this I needed a USB-C extension cable. It mostly worked. Except for the mouse. OK: everything except the mouse. I tested the plugs, I swapped things in and out, I checked the mouse worked when plugged into the laptop directly. Nothing worked. Until I unplugged the USB-C extension cord, twisted it 180 degrees, and plugged it back in. Now it works. This makes no sense to me.
cheers Chris Maunder
it's a safe passage so they can once again reintroduce a new plug
-
did you try a different cable? If different cable works: then cable might not be properly wired up. If different cable has same issue when flipping: the mouse might not be wired to handle the data and power on the flipped pins. USB-a only has 4 pins. USB-c has 24, 12 doubled. The mouse likely switched from handle micro usb to C, so to save time and a penny cut the need to fully wire up all the pins
I flipped it. It worked. I moved on :)
cheers Chris Maunder