I thought I knew C++ *sob* It has been inserting extra code on me this whole time.
-
But why is it only promoting it in one case? Sorry, you don't have to answer. I know you said you have nothing left to add. It's just I'm still confused. :confused:
To err is human. Fortune favors the monsters.
No clue, you haven't even mentioned what compiler you are using. I can only point to the language standard documents. All I can say is that it's [well documented](https://www.google.com/search?q="default+argument+promotion"). Read through the language spec, this was changed in C++11 and maybe the later specs, I don't feel like looking for you right now.
-
But why is it only promoting it in one case? Sorry, you don't have to answer. I know you said you have nothing left to add. It's just I'm still confused. :confused:
To err is human. Fortune favors the monsters.
honey the codewitch wrote:
But why is it only promoting it in one case?
Perhaps because 65 is already an int? Try this with printf("%c\n", 'A') and see what happens. (Yes, a clever enough compiler could optimize the first assembly-language sequence to mov esi,65. Obviously, optimizers still have a way to go...)
Freedom is the freedom to say that two plus two make four. If that is granted, all else follows. -- 6079 Smith W.
-
honey the codewitch wrote:
But why is it only promoting it in one case?
Perhaps because 65 is already an int? Try this with printf("%c\n", 'A') and see what happens. (Yes, a clever enough compiler could optimize the first assembly-language sequence to mov esi,65. Obviously, optimizers still have a way to go...)
Freedom is the freedom to say that two plus two make four. If that is granted, all else follows. -- 6079 Smith W.
Same result. *scratches head*
To err is human. Fortune favors the monsters.
-
No clue, you haven't even mentioned what compiler you are using. I can only point to the language standard documents. All I can say is that it's [well documented](https://www.google.com/search?q="default+argument+promotion"). Read through the language spec, this was changed in C++11 and maybe the later specs, I don't feel like looking for you right now.
Tried on clang x86, gcc x86, gcc xtensa, gcc AVR.
To err is human. Fortune favors the monsters.
-
No clue, you haven't even mentioned what compiler you are using. I can only point to the language standard documents. All I can say is that it's [well documented](https://www.google.com/search?q="default+argument+promotion"). Read through the language spec, this was changed in C++11 and maybe the later specs, I don't feel like looking for you right now.
I get that promotion is a thing. Again what I don't get is why it's only doing it in one case. The thing is, all the documentation you've pointed me to suggests it should be doing the same thing in both cases. But whatever, it doesn't matter because you're obviously tired of this.
To err is human. Fortune favors the monsters.
-
I get that promotion is a thing. Again what I don't get is why it's only doing it in one case. The thing is, all the documentation you've pointed me to suggests it should be doing the same thing in both cases. But whatever, it doesn't matter because you're obviously tired of this.
To err is human. Fortune favors the monsters.
i think you should see the rule at [C++11 7.16.1.4 paragraph 4](https://www.google.com/search?q="7.16.1.4"+c%2B%2B11) You are passing a function as an argument to a variadic function. That falls under the 'undefined behavior' description. This is why you get the default argument promotion. As I said, just look it up and read the language spec.
honey the codewitch wrote:
The thing is, all the documentation you've pointed me to suggests it should be doing the same thing in both cases.
Well, there are two things you need to look at - The rules of default argument promotion. - The rules of passing arguments to variadic functions. The spec clearly says that passing a function as an argument to a variadic function is undefined behavior. This is likely why you see the 'default argument promotion'. It also mentions addressable object types and register storage.
printf("%c\n",65);
This is passed in a register, this is defined behavior. ...
printf("%c\n",foo<-1>::test());
This is passed as a function. C11 7.16.1.4 paragraph 4 says this is undefined behavior. I do see a [proposal for C23 in the pipeline](https://www.open-std.org/jtc1/sc22/wg14/www/docs/n2975.pdf) but it hasn't been voted on yet as far as I can tell. I was wrong, looks like N2975 passed with 17 Yes, 0 No and two abstains. You still haven't said what language version you are using or compiler.
-
i think you should see the rule at [C++11 7.16.1.4 paragraph 4](https://www.google.com/search?q="7.16.1.4"+c%2B%2B11) You are passing a function as an argument to a variadic function. That falls under the 'undefined behavior' description. This is why you get the default argument promotion. As I said, just look it up and read the language spec.
honey the codewitch wrote:
The thing is, all the documentation you've pointed me to suggests it should be doing the same thing in both cases.
Well, there are two things you need to look at - The rules of default argument promotion. - The rules of passing arguments to variadic functions. The spec clearly says that passing a function as an argument to a variadic function is undefined behavior. This is likely why you see the 'default argument promotion'. It also mentions addressable object types and register storage.
printf("%c\n",65);
This is passed in a register, this is defined behavior. ...
printf("%c\n",foo<-1>::test());
This is passed as a function. C11 7.16.1.4 paragraph 4 says this is undefined behavior. I do see a [proposal for C23 in the pipeline](https://www.open-std.org/jtc1/sc22/wg14/www/docs/n2975.pdf) but it hasn't been voted on yet as far as I can tell. I was wrong, looks like N2975 passed with 17 Yes, 0 No and two abstains. You still haven't said what language version you are using or compiler.
I'm using C++17 gcc 12.2 or whatever. relatively recent i think. i've tried it on several platforms. clearly you're better at poring over that stuff than I am. It reads like japanese stereo instructions to me, and I get lost pretty easily. I didn't realize taking the return value of a function to a function that takes variadic arguments is undefined behavior. That's very weird to me, as I would have thought it would simply evaluate the function and then stick the return value in the register. Particularly since this is a constexpr function that's const all the way through I figured it would be optimized out. And it is kind of, in that it never calls anything. Anyway, thanks. I'll leave it there, as you seem impatient. Sorry to bother you.
To err is human. Fortune favors the monsters.
-
I'm using C++17 gcc 12.2 or whatever. relatively recent i think. i've tried it on several platforms. clearly you're better at poring over that stuff than I am. It reads like japanese stereo instructions to me, and I get lost pretty easily. I didn't realize taking the return value of a function to a function that takes variadic arguments is undefined behavior. That's very weird to me, as I would have thought it would simply evaluate the function and then stick the return value in the register. Particularly since this is a constexpr function that's const all the way through I figured it would be optimized out. And it is kind of, in that it never calls anything. Anyway, thanks. I'll leave it there, as you seem impatient. Sorry to bother you.
To err is human. Fortune favors the monsters.
I'm not on a PC tonight, it takes longer to type on my TV onscreen keyboard. It's not easy! :sigh: Anyways, I found some better material for you to read. [Variadic arguments - cppreference.com](https://en.cppreference.com/w/cpp/language/variadic\_arguments#Default\_conversions)
-
I'm using C++17 gcc 12.2 or whatever. relatively recent i think. i've tried it on several platforms. clearly you're better at poring over that stuff than I am. It reads like japanese stereo instructions to me, and I get lost pretty easily. I didn't realize taking the return value of a function to a function that takes variadic arguments is undefined behavior. That's very weird to me, as I would have thought it would simply evaluate the function and then stick the return value in the register. Particularly since this is a constexpr function that's const all the way through I figured it would be optimized out. And it is kind of, in that it never calls anything. Anyway, thanks. I'll leave it there, as you seem impatient. Sorry to bother you.
To err is human. Fortune favors the monsters.
Sorry, I was [wrong, about N2975](https://www.open-std.org/jtc1/sc22/WG14/www/docs/n3044.txt). It passed back in July with 17 Yes, 0 No and two abstains. I updated my post.
-
Tried on clang x86, gcc x86, gcc xtensa, gcc AVR.
To err is human. Fortune favors the monsters.
What release of gcc/clang are you using? According to [Compiler Explorer](https://godbolt.org/) I get the following with clang 5.0 with -O1 -std=C++17:
main: # @main
push rax
mov edi, .L.str
mov esi, 65
xor eax, eax
call printf
mov edi, .L.str
mov esi, 65
xor eax, eax
call printf
xor eax, eax
pop rcx
ret
.L.str:
.asciz "%c\n"And x86-64 gcc 5.1 with the same flags gives:
.LC0:
.string "%c\n"
main:
sub rsp, 8
mov esi, 65
mov edi, OFFSET FLAT:.LC0
mov eax, 0
call printf
mov esi, 65
mov edi, OFFSET FLAT:.LC0
mov eax, 0
call printf
mov eax, 0
add rsp, 8
retThose are both pretty old compilers - the first of their lines to support C++17 AFAICT. Both produce the same code for each call. So maybe something in the compiler flags you're passing?
Keep Calm and Carry On
-
What release of gcc/clang are you using? According to [Compiler Explorer](https://godbolt.org/) I get the following with clang 5.0 with -O1 -std=C++17:
main: # @main
push rax
mov edi, .L.str
mov esi, 65
xor eax, eax
call printf
mov edi, .L.str
mov esi, 65
xor eax, eax
call printf
xor eax, eax
pop rcx
ret
.L.str:
.asciz "%c\n"And x86-64 gcc 5.1 with the same flags gives:
.LC0:
.string "%c\n"
main:
sub rsp, 8
mov esi, 65
mov edi, OFFSET FLAT:.LC0
mov eax, 0
call printf
mov esi, 65
mov edi, OFFSET FLAT:.LC0
mov eax, 0
call printf
mov eax, 0
add rsp, 8
retThose are both pretty old compilers - the first of their lines to support C++17 AFAICT. Both produce the same code for each call. So maybe something in the compiler flags you're passing?
Keep Calm and Carry On
It probably has to do with the fact that I can't convince godbolt.org to allow me to remove their default compiler options and replace them with my own. I'm stuck with -o -whole-program or whatever. I used to be able to change it there somehow. Maybe someone exploited it and they turned off the feature.
To err is human. Fortune favors the monsters.
-
I'm not on a PC tonight, it takes longer to type on my TV onscreen keyboard. It's not easy! :sigh: Anyways, I found some better material for you to read. [Variadic arguments - cppreference.com](https://en.cppreference.com/w/cpp/language/variadic\_arguments#Default\_conversions)
Well it's tomorrow. In case you're curious, I took the variadic arguments out of the code. I replaced printf with putchar. Same result.
push rbp mov rbp, rsp sub rsp, 16 mov DWORD PTR \[rbp-4\], edi mov QWORD PTR \[rbp-16\], rsi mov eax, 65 ; \*\*\* movsx eax, al ; \*\*\* mov edi, eax ;\*\*\* call putchar mov edi, 65 ;\*\*\* call putchar mov eax, 0 leave retTo err is human. Fortune favors the monsters.
-
It probably has to do with the fact that I can't convince godbolt.org to allow me to remove their default compiler options and replace them with my own. I'm stuck with -o -whole-program or whatever. I used to be able to change it there somehow. Maybe someone exploited it and they turned off the feature.
To err is human. Fortune favors the monsters.
-
I get the same results using g++ 5.5.0 on my local linux box. That would be a CentOS 7 system on which I compiled g++-5.5.0 from source. So, still wondering if its maybe the flags you're using.
Keep Calm and Carry On
Looking at your output more carefully, your initial output is similar to mine. Your final output is less optimized, probably having to do with your compiler flags.
To err is human. Fortune favors the monsters.
-
Well it's tomorrow. In case you're curious, I took the variadic arguments out of the code. I replaced printf with putchar. Same result.
push rbp mov rbp, rsp sub rsp, 16 mov DWORD PTR \[rbp-4\], edi mov QWORD PTR \[rbp-16\], rsi mov eax, 65 ; \*\*\* movsx eax, al ; \*\*\* mov edi, eax ;\*\*\* call putchar mov edi, 65 ;\*\*\* call putchar mov eax, 0 leave retTo err is human. Fortune favors the monsters.
-
Ok, I tested this on my dev box, everything we talked about above in the C standard applies. And I get the same exact assembler output you get. Only with optimizations disabled. So I guess you have optimization disabled?
I have -o on godbolt.org and as I said somewhere else on this thread (I don't remember where or to whom) it seems to not be letting me change that. It used to, so I either can't find it again, or they've removed the feature.
To err is human. Fortune favors the monsters.
-
Ok, I tested this on my dev box, everything we talked about above in the C standard applies. And I get the same exact assembler output you get. Only with optimizations disabled. So I guess you have optimization disabled?
I have -o on. I can't seem to find how to change that at godbolt.org. I just remembered there's a GCC pragma where I can change it but I can't remember what it is, and so I'm googling now to figure out what it is. Edit: Now I feel like an idiot. I thought -o did at least minimal optimizations but maybe the switch means something different unsuffixed.
#pragma GCC optimize("Os")That reflects the default of my IoT build environment It fixes it, so maybe I'm worrying over nothing. I wish I could actually check my production code, but it relies on the Arduino framework, and I can't run that at godbolt. I've tried disassembler extensions in VSCode but none work with platformIO because it makes its own CMake/ninja scripts for everything on the fly.To err is human. Fortune favors the monsters.
-
I have -o on. I can't seem to find how to change that at godbolt.org. I just remembered there's a GCC pragma where I can change it but I can't remember what it is, and so I'm googling now to figure out what it is. Edit: Now I feel like an idiot. I thought -o did at least minimal optimizations but maybe the switch means something different unsuffixed.
#pragma GCC optimize("Os")That reflects the default of my IoT build environment It fixes it, so maybe I'm worrying over nothing. I wish I could actually check my production code, but it relies on the Arduino framework, and I can't run that at godbolt. I've tried disassembler extensions in VSCode but none work with platformIO because it makes its own CMake/ninja scripts for everything on the fly.To err is human. Fortune favors the monsters.
honey the codewitch wrote:
#pragma GCC optimize("Os") It fixes it
Awesome, I'm glad it's sorted out! Congratulations. Don't rely on the optimization pass. The C++ standards are correct. It's just that the optimization pass can rearrange code, remove functions and/or use intrinsics instead. The unoptimized code would be more standards compliant. :-D
-
honey the codewitch wrote:
#pragma GCC optimize("Os") It fixes it
Awesome, I'm glad it's sorted out! Congratulations. Don't rely on the optimization pass. The C++ standards are correct. It's just that the optimization pass can rearrange code, remove functions and/or use intrinsics instead. The unoptimized code would be more standards compliant. :-D
In general you're right, but in this case, there are special considerations. For starters, the toolchain is fixed to GCC, and other compilers simply don't have the backends to target what I target. So I have the luxury of using GCC specific things, and expecting GCC specific behavior, but I'm also saddled with GNU C++ vs STD C++ because the frameworks my code runs under require it, despite my code being (more) standard than GNU. That being said, I am counting on those optimizations because this is IoT, and this is critical code paths. That's why I'm looking at the asm output in the first place. :)
To err is human. Fortune favors the monsters.
-
I have -o on. I can't seem to find how to change that at godbolt.org. I just remembered there's a GCC pragma where I can change it but I can't remember what it is, and so I'm googling now to figure out what it is. Edit: Now I feel like an idiot. I thought -o did at least minimal optimizations but maybe the switch means something different unsuffixed.
#pragma GCC optimize("Os")That reflects the default of my IoT build environment It fixes it, so maybe I'm worrying over nothing. I wish I could actually check my production code, but it relies on the Arduino framework, and I can't run that at godbolt. I've tried disassembler extensions in VSCode but none work with platformIO because it makes its own CMake/ninja scripts for everything on the fly.To err is human. Fortune favors the monsters.
honey the codewitch wrote:
I wish I could actually check my production code, but it relies on the Arduino framework, and I can't run that at godbolt. I've tried disassembler extensions in VSCode but none work with platformIO because it makes its own CMake/ninja scripts for everything on the fly.
If you are comfortable looking at assembler then you could analyze your Arduino code with [Ghidra](https://github.com/NationalSecurityAgency/ghidra).
