70% of My Goal
-
I've been saving cash since October to swap a 427cid stroker into my 2012 Mustang (for you euro guys, that's a RCH (WIKI[^] under seven liters). As of this weekend, I've achieved a little more than 70% of my parts cost goal ($18k), which includes a Dart 4-bolt main block, AFR 205 aluminum heads, zero-balanced forged crank/rods/pistons, TrickFlow Stage 3 cam, Edelbrock RPM Air Gap dual-plane intake manifold, QuickFuel BDQ850 mechanical secondary carb, MSD ignition, and a Tremec T56 6-speed manual trans. It's gonna sound something like this when I'm done: http://www.youtube.com/watch?v=dILMgirAox4[^] The motor is gonna look something like this: http://www.youtube.com/watch?v=Fts0Z1jaw5s[^] And it's gonna run something like this: http://www.youtube.com/watch?v=VjrDhMxdaAs[^] The car in the linked videos current runs 9:30 in the 1/4 mile with nitrous, but my car probably won't be quite as fast because I'm building my car to go fast in the turns for longer than 9 seconds (and I won't be running nitrous). :) If you're not a car guy, you can safely go on about your business. I'm just trying to man-up the Lounge a little.
".45 ACP - because shooting twice is just silly" - JSOP, 2010
-----
You can never have too much ammo - unless you're swimming, or on fire. - JSOP, 2010
-----
When you pry the gun from my cold dead hands, be careful - the barrel will be very hot. - JSOP, 2013 -
I've been saving cash since October to swap a 427cid stroker into my 2012 Mustang (for you euro guys, that's a RCH (WIKI[^] under seven liters). As of this weekend, I've achieved a little more than 70% of my parts cost goal ($18k), which includes a Dart 4-bolt main block, AFR 205 aluminum heads, zero-balanced forged crank/rods/pistons, TrickFlow Stage 3 cam, Edelbrock RPM Air Gap dual-plane intake manifold, QuickFuel BDQ850 mechanical secondary carb, MSD ignition, and a Tremec T56 6-speed manual trans. It's gonna sound something like this when I'm done: http://www.youtube.com/watch?v=dILMgirAox4[^] The motor is gonna look something like this: http://www.youtube.com/watch?v=Fts0Z1jaw5s[^] And it's gonna run something like this: http://www.youtube.com/watch?v=VjrDhMxdaAs[^] The car in the linked videos current runs 9:30 in the 1/4 mile with nitrous, but my car probably won't be quite as fast because I'm building my car to go fast in the turns for longer than 9 seconds (and I won't be running nitrous). :) If you're not a car guy, you can safely go on about your business. I'm just trying to man-up the Lounge a little.
".45 ACP - because shooting twice is just silly" - JSOP, 2010
-----
You can never have too much ammo - unless you're swimming, or on fire. - JSOP, 2010
-----
When you pry the gun from my cold dead hands, be careful - the barrel will be very hot. - JSOP, 2013Awesome you'll have more horses than the Cottontail Ranch in Las Vegas! :) Nice ride!
Along with Antimatter and Dark Matter they've discovered the existence of Doesn't Matter which appears to have no effect on the universe whatsoever! Rich Tennant 5th Wave
-
I've been saving cash since October to swap a 427cid stroker into my 2012 Mustang (for you euro guys, that's a RCH (WIKI[^] under seven liters). As of this weekend, I've achieved a little more than 70% of my parts cost goal ($18k), which includes a Dart 4-bolt main block, AFR 205 aluminum heads, zero-balanced forged crank/rods/pistons, TrickFlow Stage 3 cam, Edelbrock RPM Air Gap dual-plane intake manifold, QuickFuel BDQ850 mechanical secondary carb, MSD ignition, and a Tremec T56 6-speed manual trans. It's gonna sound something like this when I'm done: http://www.youtube.com/watch?v=dILMgirAox4[^] The motor is gonna look something like this: http://www.youtube.com/watch?v=Fts0Z1jaw5s[^] And it's gonna run something like this: http://www.youtube.com/watch?v=VjrDhMxdaAs[^] The car in the linked videos current runs 9:30 in the 1/4 mile with nitrous, but my car probably won't be quite as fast because I'm building my car to go fast in the turns for longer than 9 seconds (and I won't be running nitrous). :) If you're not a car guy, you can safely go on about your business. I'm just trying to man-up the Lounge a little.
".45 ACP - because shooting twice is just silly" - JSOP, 2010
-----
You can never have too much ammo - unless you're swimming, or on fire. - JSOP, 2010
-----
When you pry the gun from my cold dead hands, be careful - the barrel will be very hot. - JSOP, 2013I think extra-plush pink velour for the interior is right.
“The best hope is that one of these days the Ground will get disgusted enough just to walk away ~ leaving people with nothing more to stand ON than what they have so bloody well stood FOR up to now.” Kenneth Patchen, Poet
-
I think extra-plush pink velour for the interior is right.
“The best hope is that one of these days the Ground will get disgusted enough just to walk away ~ leaving people with nothing more to stand ON than what they have so bloody well stood FOR up to now.” Kenneth Patchen, Poet
BillWoodruff wrote:
extra-plush pink
No chartreuse is JSOPs colour.
Never underestimate the power of human stupidity RAH
-
Awesome you'll have more horses than the Cottontail Ranch in Las Vegas! :) Nice ride!
Along with Antimatter and Dark Matter they've discovered the existence of Doesn't Matter which appears to have no effect on the universe whatsoever! Rich Tennant 5th Wave
Mike Hankey wrote:
Awesome you'll have more horses bunnies than the Cottontail Ranch in Las Vegas!
FTFY.
-
I've been saving cash since October to swap a 427cid stroker into my 2012 Mustang (for you euro guys, that's a RCH (WIKI[^] under seven liters). As of this weekend, I've achieved a little more than 70% of my parts cost goal ($18k), which includes a Dart 4-bolt main block, AFR 205 aluminum heads, zero-balanced forged crank/rods/pistons, TrickFlow Stage 3 cam, Edelbrock RPM Air Gap dual-plane intake manifold, QuickFuel BDQ850 mechanical secondary carb, MSD ignition, and a Tremec T56 6-speed manual trans. It's gonna sound something like this when I'm done: http://www.youtube.com/watch?v=dILMgirAox4[^] The motor is gonna look something like this: http://www.youtube.com/watch?v=Fts0Z1jaw5s[^] And it's gonna run something like this: http://www.youtube.com/watch?v=VjrDhMxdaAs[^] The car in the linked videos current runs 9:30 in the 1/4 mile with nitrous, but my car probably won't be quite as fast because I'm building my car to go fast in the turns for longer than 9 seconds (and I won't be running nitrous). :) If you're not a car guy, you can safely go on about your business. I'm just trying to man-up the Lounge a little.
".45 ACP - because shooting twice is just silly" - JSOP, 2010
-----
You can never have too much ammo - unless you're swimming, or on fire. - JSOP, 2010
-----
When you pry the gun from my cold dead hands, be careful - the barrel will be very hot. - JSOP, 2013 -
I've been saving cash since October to swap a 427cid stroker into my 2012 Mustang (for you euro guys, that's a RCH (WIKI[^] under seven liters). As of this weekend, I've achieved a little more than 70% of my parts cost goal ($18k), which includes a Dart 4-bolt main block, AFR 205 aluminum heads, zero-balanced forged crank/rods/pistons, TrickFlow Stage 3 cam, Edelbrock RPM Air Gap dual-plane intake manifold, QuickFuel BDQ850 mechanical secondary carb, MSD ignition, and a Tremec T56 6-speed manual trans. It's gonna sound something like this when I'm done: http://www.youtube.com/watch?v=dILMgirAox4[^] The motor is gonna look something like this: http://www.youtube.com/watch?v=Fts0Z1jaw5s[^] And it's gonna run something like this: http://www.youtube.com/watch?v=VjrDhMxdaAs[^] The car in the linked videos current runs 9:30 in the 1/4 mile with nitrous, but my car probably won't be quite as fast because I'm building my car to go fast in the turns for longer than 9 seconds (and I won't be running nitrous). :) If you're not a car guy, you can safely go on about your business. I'm just trying to man-up the Lounge a little.
".45 ACP - because shooting twice is just silly" - JSOP, 2010
-----
You can never have too much ammo - unless you're swimming, or on fire. - JSOP, 2010
-----
When you pry the gun from my cold dead hands, be careful - the barrel will be very hot. - JSOP, 2013 -
I think extra-plush pink velour for the interior is right.
“The best hope is that one of these days the Ground will get disgusted enough just to walk away ~ leaving people with nothing more to stand ON than what they have so bloody well stood FOR up to now.” Kenneth Patchen, Poet
BillWoodruff wrote:
I think extra-plush pink velour for the interior is right.
To be precise, fuchsia.
I love go-o-o-o-ld!
-
I've been saving cash since October to swap a 427cid stroker into my 2012 Mustang (for you euro guys, that's a RCH (WIKI[^] under seven liters). As of this weekend, I've achieved a little more than 70% of my parts cost goal ($18k), which includes a Dart 4-bolt main block, AFR 205 aluminum heads, zero-balanced forged crank/rods/pistons, TrickFlow Stage 3 cam, Edelbrock RPM Air Gap dual-plane intake manifold, QuickFuel BDQ850 mechanical secondary carb, MSD ignition, and a Tremec T56 6-speed manual trans. It's gonna sound something like this when I'm done: http://www.youtube.com/watch?v=dILMgirAox4[^] The motor is gonna look something like this: http://www.youtube.com/watch?v=Fts0Z1jaw5s[^] And it's gonna run something like this: http://www.youtube.com/watch?v=VjrDhMxdaAs[^] The car in the linked videos current runs 9:30 in the 1/4 mile with nitrous, but my car probably won't be quite as fast because I'm building my car to go fast in the turns for longer than 9 seconds (and I won't be running nitrous). :) If you're not a car guy, you can safely go on about your business. I'm just trying to man-up the Lounge a little.
".45 ACP - because shooting twice is just silly" - JSOP, 2010
-----
You can never have too much ammo - unless you're swimming, or on fire. - JSOP, 2010
-----
When you pry the gun from my cold dead hands, be careful - the barrel will be very hot. - JSOP, 2013 -
I've been saving cash since October to swap a 427cid stroker into my 2012 Mustang (for you euro guys, that's a RCH (WIKI[^] under seven liters). As of this weekend, I've achieved a little more than 70% of my parts cost goal ($18k), which includes a Dart 4-bolt main block, AFR 205 aluminum heads, zero-balanced forged crank/rods/pistons, TrickFlow Stage 3 cam, Edelbrock RPM Air Gap dual-plane intake manifold, QuickFuel BDQ850 mechanical secondary carb, MSD ignition, and a Tremec T56 6-speed manual trans. It's gonna sound something like this when I'm done: http://www.youtube.com/watch?v=dILMgirAox4[^] The motor is gonna look something like this: http://www.youtube.com/watch?v=Fts0Z1jaw5s[^] And it's gonna run something like this: http://www.youtube.com/watch?v=VjrDhMxdaAs[^] The car in the linked videos current runs 9:30 in the 1/4 mile with nitrous, but my car probably won't be quite as fast because I'm building my car to go fast in the turns for longer than 9 seconds (and I won't be running nitrous). :) If you're not a car guy, you can safely go on about your business. I'm just trying to man-up the Lounge a little.
".45 ACP - because shooting twice is just silly" - JSOP, 2010
-----
You can never have too much ammo - unless you're swimming, or on fire. - JSOP, 2010
-----
When you pry the gun from my cold dead hands, be careful - the barrel will be very hot. - JSOP, 2013 -
John Simmons / outlaw programmer wrote:
runs 9:30 in the 1/4 mile with nitrous
9 minutes 30 seconds ? That was my first impression. ;P
V.
(MQOTD rules and previous solutions)OriginalGriff wrote:
V is absolutely right
Oops - mean 9.3 seconds
".45 ACP - because shooting twice is just silly" - JSOP, 2010
-----
You can never have too much ammo - unless you're swimming, or on fire. - JSOP, 2010
-----
When you pry the gun from my cold dead hands, be careful - the barrel will be very hot. - JSOP, 2013 -
Wait a sec....If I recall, and am too lazy to look up, you started with a sensible V6 (Ford-3.0L?) and now you want to move up to a 427 (6.0L )? That must need to replace the entire drive train?:confused: Ken
Actually, the numbers are 3.7 V6 to a 7-liter V8. Yes, everything except the radiator and rear end has to be changed.
".45 ACP - because shooting twice is just silly" - JSOP, 2010
-----
You can never have too much ammo - unless you're swimming, or on fire. - JSOP, 2010
-----
When you pry the gun from my cold dead hands, be careful - the barrel will be very hot. - JSOP, 2013 -
I don't know why you bought a new car. Should have bought used as you have replace most of the working parts. :-D
Because I don't have to do the body work an old Mustang usually requires.
".45 ACP - because shooting twice is just silly" - JSOP, 2010
-----
You can never have too much ammo - unless you're swimming, or on fire. - JSOP, 2010
-----
When you pry the gun from my cold dead hands, be careful - the barrel will be very hot. - JSOP, 2013 -
Oops - mean 9.3 seconds
".45 ACP - because shooting twice is just silly" - JSOP, 2010
-----
You can never have too much ammo - unless you're swimming, or on fire. - JSOP, 2010
-----
When you pry the gun from my cold dead hands, be careful - the barrel will be very hot. - JSOP, 2013 -
Because I don't have to do the body work an old Mustang usually requires.
".45 ACP - because shooting twice is just silly" - JSOP, 2010
-----
You can never have too much ammo - unless you're swimming, or on fire. - JSOP, 2010
-----
When you pry the gun from my cold dead hands, be careful - the barrel will be very hot. - JSOP, 2013There is that. I don't have the patience for body work. The endless sanding drives me crazy. However the metal work is fun.
-
I've been saving cash since October to swap a 427cid stroker into my 2012 Mustang (for you euro guys, that's a RCH (WIKI[^] under seven liters). As of this weekend, I've achieved a little more than 70% of my parts cost goal ($18k), which includes a Dart 4-bolt main block, AFR 205 aluminum heads, zero-balanced forged crank/rods/pistons, TrickFlow Stage 3 cam, Edelbrock RPM Air Gap dual-plane intake manifold, QuickFuel BDQ850 mechanical secondary carb, MSD ignition, and a Tremec T56 6-speed manual trans. It's gonna sound something like this when I'm done: http://www.youtube.com/watch?v=dILMgirAox4[^] The motor is gonna look something like this: http://www.youtube.com/watch?v=Fts0Z1jaw5s[^] And it's gonna run something like this: http://www.youtube.com/watch?v=VjrDhMxdaAs[^] The car in the linked videos current runs 9:30 in the 1/4 mile with nitrous, but my car probably won't be quite as fast because I'm building my car to go fast in the turns for longer than 9 seconds (and I won't be running nitrous). :) If you're not a car guy, you can safely go on about your business. I'm just trying to man-up the Lounge a little.
".45 ACP - because shooting twice is just silly" - JSOP, 2010
-----
You can never have too much ammo - unless you're swimming, or on fire. - JSOP, 2010
-----
When you pry the gun from my cold dead hands, be careful - the barrel will be very hot. - JSOP, 2013You should have just bought my V8. (it's still for sale by the way, parked on the driveway while I drive the new car)
Need custom software developed? I do custom programming based primarily on MS tools with an emphasis on C# development and consulting. "And they, since they Were not the one dead, turned to their affairs" -- Robert Frost "All users always want Excel" --Ennis Lynch
-
Actually, the numbers are 3.7 V6 to a 7-liter V8. Yes, everything except the radiator and rear end has to be changed.
".45 ACP - because shooting twice is just silly" - JSOP, 2010
-----
You can never have too much ammo - unless you're swimming, or on fire. - JSOP, 2010
-----
When you pry the gun from my cold dead hands, be careful - the barrel will be very hot. - JSOP, 2013
