Skip to content
  • Categories
  • Recent
  • Tags
  • Popular
  • World
  • Users
  • Groups
Skins
  • Light
  • Cerulean
  • Cosmo
  • Flatly
  • Journal
  • Litera
  • Lumen
  • Lux
  • Materia
  • Minty
  • Morph
  • Pulse
  • Sandstone
  • Simplex
  • Sketchy
  • Spacelab
  • United
  • Yeti
  • Zephyr
  • Dark
  • Cyborg
  • Darkly
  • Quartz
  • Slate
  • Solar
  • Superhero
  • Vapor

  • Default (No Skin)
  • No Skin
Collapse
Code Project
  1. Home
  2. The Lounge
  3. 70% of My Goal

70% of My Goal

Scheduled Pinned Locked Moved The Lounge
comadobebusinessperformancequestion
17 Posts 11 Posters 0 Views 1 Watching
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • realJSOPR realJSOP

    I've been saving cash since October to swap a 427cid stroker into my 2012 Mustang (for you euro guys, that's a RCH (WIKI[^] under seven liters). As of this weekend, I've achieved a little more than 70% of my parts cost goal ($18k), which includes a Dart 4-bolt main block, AFR 205 aluminum heads, zero-balanced forged crank/rods/pistons, TrickFlow Stage 3 cam, Edelbrock RPM Air Gap dual-plane intake manifold, QuickFuel BDQ850 mechanical secondary carb, MSD ignition, and a Tremec T56 6-speed manual trans. It's gonna sound something like this when I'm done: http://www.youtube.com/watch?v=dILMgirAox4[^] The motor is gonna look something like this: http://www.youtube.com/watch?v=Fts0Z1jaw5s[^] And it's gonna run something like this: http://www.youtube.com/watch?v=VjrDhMxdaAs[^] The car in the linked videos current runs 9:30 in the 1/4 mile with nitrous, but my car probably won't be quite as fast because I'm building my car to go fast in the turns for longer than 9 seconds (and I won't be running nitrous). :) If you're not a car guy, you can safely go on about your business. I'm just trying to man-up the Lounge a little.

    ".45 ACP - because shooting twice is just silly" - JSOP, 2010
    -----
    You can never have too much ammo - unless you're swimming, or on fire. - JSOP, 2010
    -----
    When you pry the gun from my cold dead hands, be careful - the barrel will be very hot. - JSOP, 2013

    B Offline
    B Offline
    BillWoodruff
    wrote on last edited by
    #3

    I think extra-plush pink velour for the interior is right.

    “The best hope is that one of these days the Ground will get disgusted enough just to walk away ~ leaving people with nothing more to stand ON than what they have so bloody well stood FOR up to now.” Kenneth Patchen, Poet

    M J 2 Replies Last reply
    0
    • B BillWoodruff

      I think extra-plush pink velour for the interior is right.

      “The best hope is that one of these days the Ground will get disgusted enough just to walk away ~ leaving people with nothing more to stand ON than what they have so bloody well stood FOR up to now.” Kenneth Patchen, Poet

      M Offline
      M Offline
      Mycroft Holmes
      wrote on last edited by
      #4

      BillWoodruff wrote:

      extra-plush pink

      No chartreuse is JSOPs colour.

      Never underestimate the power of human stupidity RAH

      1 Reply Last reply
      0
      • Mike HankeyM Mike Hankey

        Awesome you'll have more horses than the Cottontail Ranch in Las Vegas! :) Nice ride!

        Along with Antimatter and Dark Matter they've discovered the existence of Doesn't Matter which appears to have no effect on the universe whatsoever! Rich Tennant 5th Wave

        V Offline
        V Offline
        Vivi Chellappa
        wrote on last edited by
        #5

        Mike Hankey wrote:

        Awesome you'll have more horses bunnies than the Cottontail Ranch in Las Vegas!

        FTFY.

        1 Reply Last reply
        0
        • realJSOPR realJSOP

          I've been saving cash since October to swap a 427cid stroker into my 2012 Mustang (for you euro guys, that's a RCH (WIKI[^] under seven liters). As of this weekend, I've achieved a little more than 70% of my parts cost goal ($18k), which includes a Dart 4-bolt main block, AFR 205 aluminum heads, zero-balanced forged crank/rods/pistons, TrickFlow Stage 3 cam, Edelbrock RPM Air Gap dual-plane intake manifold, QuickFuel BDQ850 mechanical secondary carb, MSD ignition, and a Tremec T56 6-speed manual trans. It's gonna sound something like this when I'm done: http://www.youtube.com/watch?v=dILMgirAox4[^] The motor is gonna look something like this: http://www.youtube.com/watch?v=Fts0Z1jaw5s[^] And it's gonna run something like this: http://www.youtube.com/watch?v=VjrDhMxdaAs[^] The car in the linked videos current runs 9:30 in the 1/4 mile with nitrous, but my car probably won't be quite as fast because I'm building my car to go fast in the turns for longer than 9 seconds (and I won't be running nitrous). :) If you're not a car guy, you can safely go on about your business. I'm just trying to man-up the Lounge a little.

          ".45 ACP - because shooting twice is just silly" - JSOP, 2010
          -----
          You can never have too much ammo - unless you're swimming, or on fire. - JSOP, 2010
          -----
          When you pry the gun from my cold dead hands, be careful - the barrel will be very hot. - JSOP, 2013

          R Offline
          R Offline
          RTek23
          wrote on last edited by
          #6

          Wait a sec....If I recall, and am too lazy to look up, you started with a sensible V6 (Ford-3.0L?) and now you want to move up to a 427 (6.0L )? That must need to replace the entire drive train?:confused: Ken

          realJSOPR 1 Reply Last reply
          0
          • realJSOPR realJSOP

            I've been saving cash since October to swap a 427cid stroker into my 2012 Mustang (for you euro guys, that's a RCH (WIKI[^] under seven liters). As of this weekend, I've achieved a little more than 70% of my parts cost goal ($18k), which includes a Dart 4-bolt main block, AFR 205 aluminum heads, zero-balanced forged crank/rods/pistons, TrickFlow Stage 3 cam, Edelbrock RPM Air Gap dual-plane intake manifold, QuickFuel BDQ850 mechanical secondary carb, MSD ignition, and a Tremec T56 6-speed manual trans. It's gonna sound something like this when I'm done: http://www.youtube.com/watch?v=dILMgirAox4[^] The motor is gonna look something like this: http://www.youtube.com/watch?v=Fts0Z1jaw5s[^] And it's gonna run something like this: http://www.youtube.com/watch?v=VjrDhMxdaAs[^] The car in the linked videos current runs 9:30 in the 1/4 mile with nitrous, but my car probably won't be quite as fast because I'm building my car to go fast in the turns for longer than 9 seconds (and I won't be running nitrous). :) If you're not a car guy, you can safely go on about your business. I'm just trying to man-up the Lounge a little.

            ".45 ACP - because shooting twice is just silly" - JSOP, 2010
            -----
            You can never have too much ammo - unless you're swimming, or on fire. - JSOP, 2010
            -----
            When you pry the gun from my cold dead hands, be careful - the barrel will be very hot. - JSOP, 2013

            B Offline
            B Offline
            bryce
            wrote on last edited by
            #7

            John Simmons / outlaw programmer wrote:

            If you're not a car guy, you can safely go on about your business. I'm just trying to man-up the Lounge a little.

            yeah good luck with that B

            MCAD ---

            1 Reply Last reply
            0
            • B BillWoodruff

              I think extra-plush pink velour for the interior is right.

              “The best hope is that one of these days the Ground will get disgusted enough just to walk away ~ leaving people with nothing more to stand ON than what they have so bloody well stood FOR up to now.” Kenneth Patchen, Poet

              J Offline
              J Offline
              Johann van der Smut
              wrote on last edited by
              #8

              BillWoodruff wrote:

              I think extra-plush pink velour for the interior is right.

              To be precise, fuchsia.

              I love go-o-o-o-ld!

              1 Reply Last reply
              0
              • realJSOPR realJSOP

                I've been saving cash since October to swap a 427cid stroker into my 2012 Mustang (for you euro guys, that's a RCH (WIKI[^] under seven liters). As of this weekend, I've achieved a little more than 70% of my parts cost goal ($18k), which includes a Dart 4-bolt main block, AFR 205 aluminum heads, zero-balanced forged crank/rods/pistons, TrickFlow Stage 3 cam, Edelbrock RPM Air Gap dual-plane intake manifold, QuickFuel BDQ850 mechanical secondary carb, MSD ignition, and a Tremec T56 6-speed manual trans. It's gonna sound something like this when I'm done: http://www.youtube.com/watch?v=dILMgirAox4[^] The motor is gonna look something like this: http://www.youtube.com/watch?v=Fts0Z1jaw5s[^] And it's gonna run something like this: http://www.youtube.com/watch?v=VjrDhMxdaAs[^] The car in the linked videos current runs 9:30 in the 1/4 mile with nitrous, but my car probably won't be quite as fast because I'm building my car to go fast in the turns for longer than 9 seconds (and I won't be running nitrous). :) If you're not a car guy, you can safely go on about your business. I'm just trying to man-up the Lounge a little.

                ".45 ACP - because shooting twice is just silly" - JSOP, 2010
                -----
                You can never have too much ammo - unless you're swimming, or on fire. - JSOP, 2010
                -----
                When you pry the gun from my cold dead hands, be careful - the barrel will be very hot. - JSOP, 2013

                V Offline
                V Offline
                V 0
                wrote on last edited by
                #9

                John Simmons / outlaw programmer wrote:

                runs 9:30 in the 1/4 mile with nitrous

                9 minutes 30 seconds ? That was my first impression. ;P

                V.
                (MQOTD rules and previous solutions)

                OriginalGriff wrote:

                V is absolutely right

                realJSOPR 1 Reply Last reply
                0
                • realJSOPR realJSOP

                  I've been saving cash since October to swap a 427cid stroker into my 2012 Mustang (for you euro guys, that's a RCH (WIKI[^] under seven liters). As of this weekend, I've achieved a little more than 70% of my parts cost goal ($18k), which includes a Dart 4-bolt main block, AFR 205 aluminum heads, zero-balanced forged crank/rods/pistons, TrickFlow Stage 3 cam, Edelbrock RPM Air Gap dual-plane intake manifold, QuickFuel BDQ850 mechanical secondary carb, MSD ignition, and a Tremec T56 6-speed manual trans. It's gonna sound something like this when I'm done: http://www.youtube.com/watch?v=dILMgirAox4[^] The motor is gonna look something like this: http://www.youtube.com/watch?v=Fts0Z1jaw5s[^] And it's gonna run something like this: http://www.youtube.com/watch?v=VjrDhMxdaAs[^] The car in the linked videos current runs 9:30 in the 1/4 mile with nitrous, but my car probably won't be quite as fast because I'm building my car to go fast in the turns for longer than 9 seconds (and I won't be running nitrous). :) If you're not a car guy, you can safely go on about your business. I'm just trying to man-up the Lounge a little.

                  ".45 ACP - because shooting twice is just silly" - JSOP, 2010
                  -----
                  You can never have too much ammo - unless you're swimming, or on fire. - JSOP, 2010
                  -----
                  When you pry the gun from my cold dead hands, be careful - the barrel will be very hot. - JSOP, 2013

                  C Offline
                  C Offline
                  Corporal Agarn
                  wrote on last edited by
                  #10

                  I don't know why you bought a new car. Should have bought used as you have replace most of the working parts. :-D

                  realJSOPR 1 Reply Last reply
                  0
                  • R RTek23

                    Wait a sec....If I recall, and am too lazy to look up, you started with a sensible V6 (Ford-3.0L?) and now you want to move up to a 427 (6.0L )? That must need to replace the entire drive train?:confused: Ken

                    realJSOPR Offline
                    realJSOPR Offline
                    realJSOP
                    wrote on last edited by
                    #11

                    Actually, the numbers are 3.7 V6 to a 7-liter V8. Yes, everything except the radiator and rear end has to be changed.

                    ".45 ACP - because shooting twice is just silly" - JSOP, 2010
                    -----
                    You can never have too much ammo - unless you're swimming, or on fire. - JSOP, 2010
                    -----
                    When you pry the gun from my cold dead hands, be careful - the barrel will be very hot. - JSOP, 2013

                    R 1 Reply Last reply
                    0
                    • V V 0

                      John Simmons / outlaw programmer wrote:

                      runs 9:30 in the 1/4 mile with nitrous

                      9 minutes 30 seconds ? That was my first impression. ;P

                      V.
                      (MQOTD rules and previous solutions)

                      OriginalGriff wrote:

                      V is absolutely right

                      realJSOPR Offline
                      realJSOPR Offline
                      realJSOP
                      wrote on last edited by
                      #12

                      Oops - mean 9.3 seconds

                      ".45 ACP - because shooting twice is just silly" - JSOP, 2010
                      -----
                      You can never have too much ammo - unless you're swimming, or on fire. - JSOP, 2010
                      -----
                      When you pry the gun from my cold dead hands, be careful - the barrel will be very hot. - JSOP, 2013

                      V 1 Reply Last reply
                      0
                      • C Corporal Agarn

                        I don't know why you bought a new car. Should have bought used as you have replace most of the working parts. :-D

                        realJSOPR Offline
                        realJSOPR Offline
                        realJSOP
                        wrote on last edited by
                        #13

                        Because I don't have to do the body work an old Mustang usually requires.

                        ".45 ACP - because shooting twice is just silly" - JSOP, 2010
                        -----
                        You can never have too much ammo - unless you're swimming, or on fire. - JSOP, 2010
                        -----
                        When you pry the gun from my cold dead hands, be careful - the barrel will be very hot. - JSOP, 2013

                        C 1 Reply Last reply
                        0
                        • realJSOPR realJSOP

                          Oops - mean 9.3 seconds

                          ".45 ACP - because shooting twice is just silly" - JSOP, 2010
                          -----
                          You can never have too much ammo - unless you're swimming, or on fire. - JSOP, 2010
                          -----
                          When you pry the gun from my cold dead hands, be careful - the barrel will be very hot. - JSOP, 2013

                          V Offline
                          V Offline
                          V 0
                          wrote on last edited by
                          #14

                          I know :)

                          V.
                          (MQOTD rules and previous solutions)

                          OriginalGriff wrote:

                          V is absolutely right

                          1 Reply Last reply
                          0
                          • realJSOPR realJSOP

                            Because I don't have to do the body work an old Mustang usually requires.

                            ".45 ACP - because shooting twice is just silly" - JSOP, 2010
                            -----
                            You can never have too much ammo - unless you're swimming, or on fire. - JSOP, 2010
                            -----
                            When you pry the gun from my cold dead hands, be careful - the barrel will be very hot. - JSOP, 2013

                            C Offline
                            C Offline
                            Corporal Agarn
                            wrote on last edited by
                            #15

                            There is that. I don't have the patience for body work. The endless sanding drives me crazy. However the metal work is fun.

                            1 Reply Last reply
                            0
                            • realJSOPR realJSOP

                              I've been saving cash since October to swap a 427cid stroker into my 2012 Mustang (for you euro guys, that's a RCH (WIKI[^] under seven liters). As of this weekend, I've achieved a little more than 70% of my parts cost goal ($18k), which includes a Dart 4-bolt main block, AFR 205 aluminum heads, zero-balanced forged crank/rods/pistons, TrickFlow Stage 3 cam, Edelbrock RPM Air Gap dual-plane intake manifold, QuickFuel BDQ850 mechanical secondary carb, MSD ignition, and a Tremec T56 6-speed manual trans. It's gonna sound something like this when I'm done: http://www.youtube.com/watch?v=dILMgirAox4[^] The motor is gonna look something like this: http://www.youtube.com/watch?v=Fts0Z1jaw5s[^] And it's gonna run something like this: http://www.youtube.com/watch?v=VjrDhMxdaAs[^] The car in the linked videos current runs 9:30 in the 1/4 mile with nitrous, but my car probably won't be quite as fast because I'm building my car to go fast in the turns for longer than 9 seconds (and I won't be running nitrous). :) If you're not a car guy, you can safely go on about your business. I'm just trying to man-up the Lounge a little.

                              ".45 ACP - because shooting twice is just silly" - JSOP, 2010
                              -----
                              You can never have too much ammo - unless you're swimming, or on fire. - JSOP, 2010
                              -----
                              When you pry the gun from my cold dead hands, be careful - the barrel will be very hot. - JSOP, 2013

                              E Offline
                              E Offline
                              Ennis Ray Lynch Jr
                              wrote on last edited by
                              #16

                              You should have just bought my V8. (it's still for sale by the way, parked on the driveway while I drive the new car)

                              Need custom software developed? I do custom programming based primarily on MS tools with an emphasis on C# development and consulting. "And they, since they Were not the one dead, turned to their affairs" -- Robert Frost "All users always want Excel" --Ennis Lynch

                              1 Reply Last reply
                              0
                              • realJSOPR realJSOP

                                Actually, the numbers are 3.7 V6 to a 7-liter V8. Yes, everything except the radiator and rear end has to be changed.

                                ".45 ACP - because shooting twice is just silly" - JSOP, 2010
                                -----
                                You can never have too much ammo - unless you're swimming, or on fire. - JSOP, 2010
                                -----
                                When you pry the gun from my cold dead hands, be careful - the barrel will be very hot. - JSOP, 2013

                                R Offline
                                R Offline
                                RTek23
                                wrote on last edited by
                                #17

                                Bit of a difference. I figured you would have to re-gear the rear end as well. Sounds like you have it in hand. Are you going to share a blog or anything on the transformation? Ken

                                1 Reply Last reply
                                0
                                Reply
                                • Reply as topic
                                Log in to reply
                                • Oldest to Newest
                                • Newest to Oldest
                                • Most Votes


                                • Login

                                • Don't have an account? Register

                                • Login or register to search.
                                • First post
                                  Last post
                                0
                                • Categories
                                • Recent
                                • Tags
                                • Popular
                                • World
                                • Users
                                • Groups