Electronics Computer
-
I don't have much equipment yet. I have a cheap soldering iron from Radio Shack, a breadboard, and a number of basic components. I am trying to save money to get more equipment and components. My favorite site to look for things is All Electronics[^]. EDIT: tupid 's' key.
What do you get when you cross a joke with a rhetorical question?
Another good place for surplus parts is B G Micro[^], I've got a few things there and quite a bit on eBay. Good luck it took me a long time to amass my supply. Used/Broken equipment is another good place for parts. My neighbor had an office next to my apartment and used to throw away a lot of printers, etc. and I used to scrounge parts. If I can be of any help let me know.
Here today gone to Maui...
-
I cannot draw at all. My artistic talent is nonexistent.
What do you get when you cross a joke with a rhetorical question?
The drawing isn't as important as the math and physics; you can always hire a draftsman. :-D
Will Rogers never met me.
-
That's hardware, not software.
What do you get when you cross a joke with a rhetorical question?
-
Beat me to it. Can't upvote on the phone, so you'll have to imagine this reply is an upvote.
Wrong is evil and must be defeated. - Jeff Ello[^]
-
Beat me to it. Can't upvote on the phone, so you'll have to imagine this reply is an upvote.
Wrong is evil and must be defeated. - Jeff Ello[^]
-
KiCad looks interesting, I personally use Eagle as it's also free. Also have TeraTerm[^] and PuTTY[^]. I don't know what equipment you have but Saleae[^] just came out with a new line of logic analyzers that look pretty cool. I've got an older model and I don't know what I would do without it, especially doing communications; SPI, I2C, etc.. Also if doing anything with Atmel chips I recommend Atmel Studio 6.2[^] is the latest.
Here today gone to Maui...
Interesting. I've had my eye on things like this for a while: http://www.hantek.com.cn/en/ProductDetail_3_10.html[^] Never used a logic analyser before but there is more I2C in my life these days. Do you think it beneficial to keep oscilloscope/logic analyser separate?
Regards, Rob Philpott.
-
You don't need to be rich. LTC (Linear Technology Corporation) do a version of SPICE free for the downloading. http://www.linear.com/LTspiceIV?utm_medium=email&utm_source=transactional&utm_campaign=LT_Insider[^] They also have how-to videos and other helpful stuff on their site. As usual, no affiliation... Just a happy sometime user. Cheers, Peter
Software rusts. Simon Stephenson, ca 1994. So does this signature. me, 2012
-
Jörgen Andersson wrote:
Can't upvote on the phone
You can if you switch to Full View instead of mobile view.
Or log in on the computer when I come home.
Wrong is evil and must be defeated. - Jeff Ello[^]
-
I am setting up an older eMachines computer for use in my electronics 'Mad Scientist Laboratory'. It will run Windows 7 and have a number of things installed. ex: * Firefox (better than IE) * KiCad (VERY cool electronics/pcb design application. And it's free!) * LibreOffice (for various things, including a components inventory) * Python 3.4.1 (Utility scripts) * Geany (for editing above mentioned scripts) * PNotes.NET (For notes [duh]) * Foxit Reader (Better than Adobe Reader) * Cubic Explorer * PeaZip Does anyone else here like electronics? If so, what software do you use? EDIT 5/30/2014-9:28 PM: Installing the many updates. This is going to take a while.
What do you get when you cross a joke with a rhetorical question?
In a different decade century millennia life I was designing PCB in OrCad. I doubt it's worth the money if you're not a professional. Otherwise I can really recommend a proper soldering station. I'm quite partial to the old fashioned Weller WTCP series, because the magnastat temperaturesensor is the actual tip.
Wrong is evil and must be defeated. - Jeff Ello[^]
-
Interesting. I've had my eye on things like this for a while: http://www.hantek.com.cn/en/ProductDetail_3_10.html[^] Never used a logic analyser before but there is more I2C in my life these days. Do you think it beneficial to keep oscilloscope/logic analyser separate?
Regards, Rob Philpott.
Nice unit!
Rob Philpott wrote:
Do you think it beneficial to keep oscilloscope/logic analyser separate?
Not necessarily I just happened to do it that way because it was cheaper.
Here today gone to Maui...
-
You don't need to be rich. LTC (Linear Technology Corporation) do a version of SPICE free for the downloading. http://www.linear.com/LTspiceIV?utm_medium=email&utm_source=transactional&utm_campaign=LT_Insider[^] They also have how-to videos and other helpful stuff on their site. As usual, no affiliation... Just a happy sometime user. Cheers, Peter
Software rusts. Simon Stephenson, ca 1994. So does this signature. me, 2012
Thanks, Peter - Great link! :-D
Will Rogers never met me.
-
In a different decade century millennia life I was designing PCB in OrCad. I doubt it's worth the money if you're not a professional. Otherwise I can really recommend a proper soldering station. I'm quite partial to the old fashioned Weller WTCP series, because the magnastat temperaturesensor is the actual tip.
Wrong is evil and must be defeated. - Jeff Ello[^]
Great soldering stations! Does Weller still make them?
Will Rogers never met me.
-
Great soldering stations! Does Weller still make them?
Will Rogers never met me.
Can still buy them at least
Wrong is evil and must be defeated. - Jeff Ello[^]
-
Great soldering stations! Does Weller still make them?
Will Rogers never met me.
Still avaiable here, anyway. I still have the one I bought in 1969, and a bucketload of assorted tips. The iron plating means the tips last for ages. Used it on everything from tiny surface mount chips to stained glass panels. Didn't manage the car radiator unassisted, though. In all that time, had to buy one replacement sleeve. Cheers, Peter
Software rusts. Simon Stephenson, ca 1994. So does this signature. me, 2012