70% of My Goal
-
I've been saving cash since October to swap a 427cid stroker into my 2012 Mustang (for you euro guys, that's a RCH (WIKI[^] under seven liters). As of this weekend, I've achieved a little more than 70% of my parts cost goal ($18k), which includes a Dart 4-bolt main block, AFR 205 aluminum heads, zero-balanced forged crank/rods/pistons, TrickFlow Stage 3 cam, Edelbrock RPM Air Gap dual-plane intake manifold, QuickFuel BDQ850 mechanical secondary carb, MSD ignition, and a Tremec T56 6-speed manual trans. It's gonna sound something like this when I'm done: http://www.youtube.com/watch?v=dILMgirAox4[^] The motor is gonna look something like this: http://www.youtube.com/watch?v=Fts0Z1jaw5s[^] And it's gonna run something like this: http://www.youtube.com/watch?v=VjrDhMxdaAs[^] The car in the linked videos current runs 9:30 in the 1/4 mile with nitrous, but my car probably won't be quite as fast because I'm building my car to go fast in the turns for longer than 9 seconds (and I won't be running nitrous). :) If you're not a car guy, you can safely go on about your business. I'm just trying to man-up the Lounge a little.
".45 ACP - because shooting twice is just silly" - JSOP, 2010
-----
You can never have too much ammo - unless you're swimming, or on fire. - JSOP, 2010
-----
When you pry the gun from my cold dead hands, be careful - the barrel will be very hot. - JSOP, 2013 -
I think extra-plush pink velour for the interior is right.
“The best hope is that one of these days the Ground will get disgusted enough just to walk away ~ leaving people with nothing more to stand ON than what they have so bloody well stood FOR up to now.” Kenneth Patchen, Poet
BillWoodruff wrote:
I think extra-plush pink velour for the interior is right.
To be precise, fuchsia.
I love go-o-o-o-ld!
-
I've been saving cash since October to swap a 427cid stroker into my 2012 Mustang (for you euro guys, that's a RCH (WIKI[^] under seven liters). As of this weekend, I've achieved a little more than 70% of my parts cost goal ($18k), which includes a Dart 4-bolt main block, AFR 205 aluminum heads, zero-balanced forged crank/rods/pistons, TrickFlow Stage 3 cam, Edelbrock RPM Air Gap dual-plane intake manifold, QuickFuel BDQ850 mechanical secondary carb, MSD ignition, and a Tremec T56 6-speed manual trans. It's gonna sound something like this when I'm done: http://www.youtube.com/watch?v=dILMgirAox4[^] The motor is gonna look something like this: http://www.youtube.com/watch?v=Fts0Z1jaw5s[^] And it's gonna run something like this: http://www.youtube.com/watch?v=VjrDhMxdaAs[^] The car in the linked videos current runs 9:30 in the 1/4 mile with nitrous, but my car probably won't be quite as fast because I'm building my car to go fast in the turns for longer than 9 seconds (and I won't be running nitrous). :) If you're not a car guy, you can safely go on about your business. I'm just trying to man-up the Lounge a little.
".45 ACP - because shooting twice is just silly" - JSOP, 2010
-----
You can never have too much ammo - unless you're swimming, or on fire. - JSOP, 2010
-----
When you pry the gun from my cold dead hands, be careful - the barrel will be very hot. - JSOP, 2013 -
I've been saving cash since October to swap a 427cid stroker into my 2012 Mustang (for you euro guys, that's a RCH (WIKI[^] under seven liters). As of this weekend, I've achieved a little more than 70% of my parts cost goal ($18k), which includes a Dart 4-bolt main block, AFR 205 aluminum heads, zero-balanced forged crank/rods/pistons, TrickFlow Stage 3 cam, Edelbrock RPM Air Gap dual-plane intake manifold, QuickFuel BDQ850 mechanical secondary carb, MSD ignition, and a Tremec T56 6-speed manual trans. It's gonna sound something like this when I'm done: http://www.youtube.com/watch?v=dILMgirAox4[^] The motor is gonna look something like this: http://www.youtube.com/watch?v=Fts0Z1jaw5s[^] And it's gonna run something like this: http://www.youtube.com/watch?v=VjrDhMxdaAs[^] The car in the linked videos current runs 9:30 in the 1/4 mile with nitrous, but my car probably won't be quite as fast because I'm building my car to go fast in the turns for longer than 9 seconds (and I won't be running nitrous). :) If you're not a car guy, you can safely go on about your business. I'm just trying to man-up the Lounge a little.
".45 ACP - because shooting twice is just silly" - JSOP, 2010
-----
You can never have too much ammo - unless you're swimming, or on fire. - JSOP, 2010
-----
When you pry the gun from my cold dead hands, be careful - the barrel will be very hot. - JSOP, 2013 -
John Simmons / outlaw programmer wrote:
runs 9:30 in the 1/4 mile with nitrous
9 minutes 30 seconds ? That was my first impression. ;P
V.
(MQOTD rules and previous solutions)OriginalGriff wrote:
V is absolutely right
Oops - mean 9.3 seconds
".45 ACP - because shooting twice is just silly" - JSOP, 2010
-----
You can never have too much ammo - unless you're swimming, or on fire. - JSOP, 2010
-----
When you pry the gun from my cold dead hands, be careful - the barrel will be very hot. - JSOP, 2013 -
Wait a sec....If I recall, and am too lazy to look up, you started with a sensible V6 (Ford-3.0L?) and now you want to move up to a 427 (6.0L )? That must need to replace the entire drive train?:confused: Ken
Actually, the numbers are 3.7 V6 to a 7-liter V8. Yes, everything except the radiator and rear end has to be changed.
".45 ACP - because shooting twice is just silly" - JSOP, 2010
-----
You can never have too much ammo - unless you're swimming, or on fire. - JSOP, 2010
-----
When you pry the gun from my cold dead hands, be careful - the barrel will be very hot. - JSOP, 2013 -
I don't know why you bought a new car. Should have bought used as you have replace most of the working parts. :-D
Because I don't have to do the body work an old Mustang usually requires.
".45 ACP - because shooting twice is just silly" - JSOP, 2010
-----
You can never have too much ammo - unless you're swimming, or on fire. - JSOP, 2010
-----
When you pry the gun from my cold dead hands, be careful - the barrel will be very hot. - JSOP, 2013 -
Oops - mean 9.3 seconds
".45 ACP - because shooting twice is just silly" - JSOP, 2010
-----
You can never have too much ammo - unless you're swimming, or on fire. - JSOP, 2010
-----
When you pry the gun from my cold dead hands, be careful - the barrel will be very hot. - JSOP, 2013 -
Because I don't have to do the body work an old Mustang usually requires.
".45 ACP - because shooting twice is just silly" - JSOP, 2010
-----
You can never have too much ammo - unless you're swimming, or on fire. - JSOP, 2010
-----
When you pry the gun from my cold dead hands, be careful - the barrel will be very hot. - JSOP, 2013There is that. I don't have the patience for body work. The endless sanding drives me crazy. However the metal work is fun.
-
I've been saving cash since October to swap a 427cid stroker into my 2012 Mustang (for you euro guys, that's a RCH (WIKI[^] under seven liters). As of this weekend, I've achieved a little more than 70% of my parts cost goal ($18k), which includes a Dart 4-bolt main block, AFR 205 aluminum heads, zero-balanced forged crank/rods/pistons, TrickFlow Stage 3 cam, Edelbrock RPM Air Gap dual-plane intake manifold, QuickFuel BDQ850 mechanical secondary carb, MSD ignition, and a Tremec T56 6-speed manual trans. It's gonna sound something like this when I'm done: http://www.youtube.com/watch?v=dILMgirAox4[^] The motor is gonna look something like this: http://www.youtube.com/watch?v=Fts0Z1jaw5s[^] And it's gonna run something like this: http://www.youtube.com/watch?v=VjrDhMxdaAs[^] The car in the linked videos current runs 9:30 in the 1/4 mile with nitrous, but my car probably won't be quite as fast because I'm building my car to go fast in the turns for longer than 9 seconds (and I won't be running nitrous). :) If you're not a car guy, you can safely go on about your business. I'm just trying to man-up the Lounge a little.
".45 ACP - because shooting twice is just silly" - JSOP, 2010
-----
You can never have too much ammo - unless you're swimming, or on fire. - JSOP, 2010
-----
When you pry the gun from my cold dead hands, be careful - the barrel will be very hot. - JSOP, 2013You should have just bought my V8. (it's still for sale by the way, parked on the driveway while I drive the new car)
Need custom software developed? I do custom programming based primarily on MS tools with an emphasis on C# development and consulting. "And they, since they Were not the one dead, turned to their affairs" -- Robert Frost "All users always want Excel" --Ennis Lynch
-
Actually, the numbers are 3.7 V6 to a 7-liter V8. Yes, everything except the radiator and rear end has to be changed.
".45 ACP - because shooting twice is just silly" - JSOP, 2010
-----
You can never have too much ammo - unless you're swimming, or on fire. - JSOP, 2010
-----
When you pry the gun from my cold dead hands, be careful - the barrel will be very hot. - JSOP, 2013
