Why VB is popular in America!
-
harold aptroot wrote:
VB doesn't skip 13 though
Are you saying VB pre-dates Christianity? :rolleyes:
Regards, Nish
My technology blog: voidnish.wordpress.com
-
So is there a concept of story (number of floors) in the UK? Such as a three-story building (3 floors). How often does floor overrun happen in the UK?
Paul Watt wrote:
So is there a concept of story (number of floors) in the UK?
Such as a three-story building (3 floors).They spell it as storey I think. Yeah, someone like Dalek would say he lives in a 2-story home but the top-floor would still be the first floor. :-D
Regards, Nish
My technology blog: voidnish.wordpress.com
-
My building is built on a hill, so the groud floor is different depending what door you use to enter. Therefore the floor are not numbered, but lettered, from A to I.
kevinnicol wrote:
My building is built on a hill, so the groud floor is different depending what door you use to enter. Therefore the floor are not numbered, but lettered, from A to I.
Must be nice there! :-)
Regards, Nish
My technology blog: voidnish.wordpress.com
-
harold aptroot wrote:
VB doesn't skip 13 though
Are you saying VB pre-dates Christianity? :rolleyes:
Regards, Nish
My technology blog: voidnish.wordpress.com
-
I realized this as I was explaining the 1s floor vs 2nd floor differences[^] between UK and American english. In the UK (and India, Australia) floors are 0-indexed. The ground floor is 0, the first floor above ground is 1, and so on. The basement is usually -1. In the US (and I believe Canada too), floors are 1-indexed. The ground floor is 1, the next floor is 2 and so on. I don't think negative numbering is used for sub-ground levels. May explain why a lot of the C/C++ aficionados are European. While VB and BASIC are essentially American inventions.
Regards, Nish
My technology blog: voidnish.wordpress.com
Nishant Sivakumar wrote:
The ground floor is 0, the first floor above ground is 1
so, it's not counting floors, it's counting "floors below".
-
harold aptroot wrote:
Doesn't it?
Well that'd make it a semitic language then. :-D
Regards, Nish
My technology blog: voidnish.wordpress.com
-
harold aptroot wrote:
Doesn't it?
Well that'd make it a semitic language then. :-D
Regards, Nish
My technology blog: voidnish.wordpress.com
-
I realized this as I was explaining the 1s floor vs 2nd floor differences[^] between UK and American english. In the UK (and India, Australia) floors are 0-indexed. The ground floor is 0, the first floor above ground is 1, and so on. The basement is usually -1. In the US (and I believe Canada too), floors are 1-indexed. The ground floor is 1, the next floor is 2 and so on. I don't think negative numbering is used for sub-ground levels. May explain why a lot of the C/C++ aficionados are European. While VB and BASIC are essentially American inventions.
Regards, Nish
My technology blog: voidnish.wordpress.com
So what do they do with buildings built on the side of a hill? Here there's a ground floor entrance on the basement, the first floor and the second floor (US). The main office is at the second floor ground entrance.
CQ de W5ALT
Walt Fair, Jr., P. E. Comport Computing Specializing in Technical Engineering Software
-
So what do they do with buildings built on the side of a hill? Here there's a ground floor entrance on the basement, the first floor and the second floor (US). The main office is at the second floor ground entrance.
CQ de W5ALT
Walt Fair, Jr., P. E. Comport Computing Specializing in Technical Engineering Software
It probably depends on what side of the building you are on...
-
PIEBALDconsult wrote:
I don't see what that has to do with BASIC.
It's a CodeProject meme from a few years ago where some of us (mostly John, CG and myself) would joke about C/C++ guys 0-indexing in real life vs VB guys who'd use 1-based indexing. :)
Regards, Nish
My technology blog: voidnish.wordpress.com
Nishant Sivakumar wrote:
VB guys who'd use 1-based indexing
The guys might, but the language doesn't. One could just as easily use 1-based indexing in C/C++.
-
I realized this as I was explaining the 1s floor vs 2nd floor differences[^] between UK and American english. In the UK (and India, Australia) floors are 0-indexed. The ground floor is 0, the first floor above ground is 1, and so on. The basement is usually -1. In the US (and I believe Canada too), floors are 1-indexed. The ground floor is 1, the next floor is 2 and so on. I don't think negative numbering is used for sub-ground levels. May explain why a lot of the C/C++ aficionados are European. While VB and BASIC are essentially American inventions.
Regards, Nish
My technology blog: voidnish.wordpress.com
Waytogo Nish. Expect ten more people to close their accounts here because you've disrespected VB!
Best wishes, Hans
-
Nishant Sivakumar wrote:
VB guys who'd use 1-based indexing
The guys might, but the language doesn't. One could just as easily use 1-based indexing in C/C++.
PIEBALDconsult wrote:
The guys might, but the language doesn't.
The language culture encourages it.
Dim a as int(10) means a 11-item array indexed from 0 to 10.int a[10]means a 10-item array indexed from 0 to 9. Can't change that. People can always work around this (but that's not the point here).Regards, Nish
My technology blog: voidnish.wordpress.com
-
Waytogo Nish. Expect ten more people to close their accounts here because you've disrespected VB!
Best wishes, Hans
Hans Dietrich wrote:
Expect ten more people to close their accounts here because you've disrespected VB!
:laugh: That's funny but when you add the fact that it's a Hans-quote, you try and look at its inner meaning and then you have that ahhh-moment! 5!
Regards, Nish
My technology blog: voidnish.wordpress.com
-
Depends on the building. I think most buildings define a ground level (the entry) or a Lobby and use a letter for the definition on the elevator. My sisters apartment Building has it as such B (Basement) G (Ground) 1 (First Floor) 2 etc etc [EDIT] I use my sisters apartment as an example cause my place of living is even more complicated (yet simple). It is a split entry house. So I have upstairs and downstairs :-D
Computers have been intelligent for a long time now. It just so happens that the program writers are about as effective as a room full of monkeys trying to crank out a copy of Hamlet.
Collin Jasnoch wrote:
It is a split entry house. So I have upstairs and downstairs
Same here. It's a multi-level (5 actual levels if you include the basement) :-)
Regards, Nish
My technology blog: voidnish.wordpress.com
-
I realized this as I was explaining the 1s floor vs 2nd floor differences[^] between UK and American english. In the UK (and India, Australia) floors are 0-indexed. The ground floor is 0, the first floor above ground is 1, and so on. The basement is usually -1. In the US (and I believe Canada too), floors are 1-indexed. The ground floor is 1, the next floor is 2 and so on. I don't think negative numbering is used for sub-ground levels. May explain why a lot of the C/C++ aficionados are European. While VB and BASIC are essentially American inventions.
Regards, Nish
My technology blog: voidnish.wordpress.com
Well, much like VB itself, our elevators are not designed for programmers... :-D
-
I realized this as I was explaining the 1s floor vs 2nd floor differences[^] between UK and American english. In the UK (and India, Australia) floors are 0-indexed. The ground floor is 0, the first floor above ground is 1, and so on. The basement is usually -1. In the US (and I believe Canada too), floors are 1-indexed. The ground floor is 1, the next floor is 2 and so on. I don't think negative numbering is used for sub-ground levels. May explain why a lot of the C/C++ aficionados are European. While VB and BASIC are essentially American inventions.
Regards, Nish
My technology blog: voidnish.wordpress.com
if you are on the ground floor, isn't that floor 1? and the floor above you would be floor 2? most hospitals have the base floor as floor 1 and the G is the garage. My reasoning is that how can you be on floor 0? it makes no sense...to me at least. Then again, I'm just a silly American who started off programming with VB. :-D
Just along for the ride. "the meat from that butcher is just the dogs danglies, absolutely amazing cuts of beef." - DaveAuld (2011)
"No, that is just the earthly manifestation of the Great God Retardon." - Nagy Vilmos (2011) -
PIEBALDconsult wrote:
The guys might, but the language doesn't.
The language culture encourages it.
Dim a as int(10) means a 11-item array indexed from 0 to 10.int a[10]means a 10-item array indexed from 0 to 9. Can't change that. People can always work around this (but that's not the point here).Regards, Nish
My technology blog: voidnish.wordpress.com
Nishant Sivakumar wrote:
The language culture encourages it.
DimWhen I started programming, I learned with VB but always took notice of the "Dim" statement. It always reminded me of "dim witted". :)
Just along for the ride. "the meat from that butcher is just the dogs danglies, absolutely amazing cuts of beef." - DaveAuld (2011)
"No, that is just the earthly manifestation of the Great God Retardon." - Nagy Vilmos (2011) -
Nishant Sivakumar wrote:
VB guys who'd use 1-based indexing
The guys might, but the language doesn't. One could just as easily use 1-based indexing in C/C++.
But then you smell of FORTRAN and have to publish a book about numerical methods. :rolleyes:
If the Lord God Almighty had consulted me before embarking upon the Creation, I would have recommended something simpler. -- Alfonso the Wise, 13th Century King of Castile.
This is going on my arrogant assumptions. You may have a superb reason why I'm completely wrong. -- Iain Clarke
[My articles] -
harold aptroot wrote:
VB doesn't skip 13 though
Are you saying VB pre-dates Christianity? :rolleyes:
Regards, Nish
My technology blog: voidnish.wordpress.com
Romans didn't know
0as well multithreading, I believe.If the Lord God Almighty had consulted me before embarking upon the Creation, I would have recommended something simpler. -- Alfonso the Wise, 13th Century King of Castile.
This is going on my arrogant assumptions. You may have a superb reason why I'm completely wrong. -- Iain Clarke
[My articles] -
if you are on the ground floor, isn't that floor 1? and the floor above you would be floor 2? most hospitals have the base floor as floor 1 and the G is the garage. My reasoning is that how can you be on floor 0? it makes no sense...to me at least. Then again, I'm just a silly American who started off programming with VB. :-D
Just along for the ride. "the meat from that butcher is just the dogs danglies, absolutely amazing cuts of beef." - DaveAuld (2011)
"No, that is just the earthly manifestation of the Great God Retardon." - Nagy Vilmos (2011)Slacker007 wrote:
if you are on the ground floor, isn't that floor 1? and the floor above you would be floor 2?
In the US, yes. In the UK, India, Australia that'd be floor-0 and the floor above is floor-1.
Slacker007 wrote:
Then again, I'm just a silly American who started off programming with VB.
And here I am, an Indian origin dude living in America (also started with Basic, GWBASIC though not VB) wondering how you can substract 3 from 2. What is all this negative integer stuff anyway? I don't get it. :-D
Regards, Nish
My technology blog: voidnish.wordpress.com