Damn c# { }'s
-
Left brace, right brace, back arrow, code...
Duncan Edwards Jones wrote:
Left brace, right brace, back arrow, code...
Exactly! Marc
Imperative to Functional Programming Succinctly Contributors Wanted for Higher Order Programming Project!
-
I main problem I seem to is after a lot of if, Switch or whatever and you end up with a lot of
}
}
}
}and then trying to figure which } belong with which {
RossMW wrote:
and then trying to figure which } belong with which {
Dang, doesn't the IDE (dimly, I'll grant) light up the matching braces? [on my high horse] If you have that much nesting, maybe you should break the function apart into smaller calls? [/on my high horse] Marc
Imperative to Functional Programming Succinctly Contributors Wanted for Higher Order Programming Project!
-
RossMW wrote:
and then trying to figure which } belong with which {
Dang, doesn't the IDE (dimly, I'll grant) light up the matching braces? [on my high horse] If you have that much nesting, maybe you should break the function apart into smaller calls? [/on my high horse] Marc
Imperative to Functional Programming Succinctly Contributors Wanted for Higher Order Programming Project!
-
That it pretty much is - definitely muscle memory at this stage.
-
Now, I am not interested in a VB versus C# debate but. In my job I only spend about 20% of my time coding. Being from a C# background anything new I would normally do in C# (and yes very occasionally VB), but I also have to maintain old VB code (and heaven forbid, very occasionally VB6). Normally I spent a month or two in each language (depending on the task at hand) and are happy in any camp. Changing back and forth between languages is relatively straight forward, but lately I noticed it takes me longer to get back into swing of C#. And the reason.. Well, I think its because I've got myself into bad c# typing habits from using vb. I seem to be wasting so time chasing missing / misplaced { }, forgetting semicolons case sensitivity and ()'s. Now semicolons, case and () problems are just a "Oh Bugger" moment, but as for missing / misplaced { } 's. They can be time waster. For all you pro c# developers, Do you have any tips on keeping these damn { } under control?
Spend more time coding in C-style syntaxes rather than BASIC style ones. We're creatures of habit and muscle memory doesn't make this issue any better.
Jeremy Falcon
-
RossMW wrote:
and then trying to figure which } belong with which {
Dang, doesn't the IDE (dimly, I'll grant) light up the matching braces? [on my high horse] If you have that much nesting, maybe you should break the function apart into smaller calls? [/on my high horse] Marc
Imperative to Functional Programming Succinctly Contributors Wanted for Higher Order Programming Project!
Actually that's a closing brace for your namespace, class, method and if statement. Not much nesting at all, it just looks that way in C# :) This is where I'd usually sing some VB praise, but having been away from VB for far too long I'm just not in the mood :laugh:
Visit my blog at Sander's bits - Writing the code you need. Or read my articles at my CodeProject profile.
Simplicity is prerequisite for reliability. — Edsger W. Dijkstra
Regards, Sander
-
Actually that's a closing brace for your namespace, class, method and if statement. Not much nesting at all, it just looks that way in C# :) This is where I'd usually sing some VB praise, but having been away from VB for far too long I'm just not in the mood :laugh:
Visit my blog at Sander's bits - Writing the code you need. Or read my articles at my CodeProject profile.
Simplicity is prerequisite for reliability. — Edsger W. Dijkstra
Regards, Sander
Sander Rossel wrote:
Actually that's a closing brace for your namespace, class, method and if statement.
Heh, good point. I usually never pay much attention to those. :) Marc
Imperative to Functional Programming Succinctly Contributors Wanted for Higher Order Programming Project!
-
Now, I am not interested in a VB versus C# debate but. In my job I only spend about 20% of my time coding. Being from a C# background anything new I would normally do in C# (and yes very occasionally VB), but I also have to maintain old VB code (and heaven forbid, very occasionally VB6). Normally I spent a month or two in each language (depending on the task at hand) and are happy in any camp. Changing back and forth between languages is relatively straight forward, but lately I noticed it takes me longer to get back into swing of C#. And the reason.. Well, I think its because I've got myself into bad c# typing habits from using vb. I seem to be wasting so time chasing missing / misplaced { }, forgetting semicolons case sensitivity and ()'s. Now semicolons, case and () problems are just a "Oh Bugger" moment, but as for missing / misplaced { } 's. They can be time waster. For all you pro c# developers, Do you have any tips on keeping these damn { } under control?
Rotate your monitor 90 degrees, to portrait orientation. No kidding.
I wanna be a eunuchs developer! Pass me a bread knife!
-
Now, I am not interested in a VB versus C# debate but. In my job I only spend about 20% of my time coding. Being from a C# background anything new I would normally do in C# (and yes very occasionally VB), but I also have to maintain old VB code (and heaven forbid, very occasionally VB6). Normally I spent a month or two in each language (depending on the task at hand) and are happy in any camp. Changing back and forth between languages is relatively straight forward, but lately I noticed it takes me longer to get back into swing of C#. And the reason.. Well, I think its because I've got myself into bad c# typing habits from using vb. I seem to be wasting so time chasing missing / misplaced { }, forgetting semicolons case sensitivity and ()'s. Now semicolons, case and () problems are just a "Oh Bugger" moment, but as for missing / misplaced { } 's. They can be time waster. For all you pro c# developers, Do you have any tips on keeping these damn { } under control?
Consistent formatting.
-
Actually that's a closing brace for your namespace, class, method and if statement. Not much nesting at all, it just looks that way in C# :) This is where I'd usually sing some VB praise, but having been away from VB for far too long I'm just not in the mood :laugh:
Visit my blog at Sander's bits - Writing the code you need. Or read my articles at my CodeProject profile.
Simplicity is prerequisite for reliability. — Edsger W. Dijkstra
Regards, Sander
-
Rotate your monitor 90 degrees, to portrait orientation. No kidding.
I wanna be a eunuchs developer! Pass me a bread knife!
-
Yes, very dimly. Makes it hide to find when you have to scroll to see it. Just have to remember the Left brace, right brace, back arrow, code... dance move...
-
-
Now, I am not interested in a VB versus C# debate but. In my job I only spend about 20% of my time coding. Being from a C# background anything new I would normally do in C# (and yes very occasionally VB), but I also have to maintain old VB code (and heaven forbid, very occasionally VB6). Normally I spent a month or two in each language (depending on the task at hand) and are happy in any camp. Changing back and forth between languages is relatively straight forward, but lately I noticed it takes me longer to get back into swing of C#. And the reason.. Well, I think its because I've got myself into bad c# typing habits from using vb. I seem to be wasting so time chasing missing / misplaced { }, forgetting semicolons case sensitivity and ()'s. Now semicolons, case and () problems are just a "Oh Bugger" moment, but as for missing / misplaced { } 's. They can be time waster. For all you pro c# developers, Do you have any tips on keeping these damn { } under control?
how about... instead of
if (condition)
{
....
}use
if (!condition)
return;
....All in one Menu-Ribbon Bar DirectX for WinRT/C# since 2013! Taking over the world since 1371!
-
Now, I am not interested in a VB versus C# debate but. In my job I only spend about 20% of my time coding. Being from a C# background anything new I would normally do in C# (and yes very occasionally VB), but I also have to maintain old VB code (and heaven forbid, very occasionally VB6). Normally I spent a month or two in each language (depending on the task at hand) and are happy in any camp. Changing back and forth between languages is relatively straight forward, but lately I noticed it takes me longer to get back into swing of C#. And the reason.. Well, I think its because I've got myself into bad c# typing habits from using vb. I seem to be wasting so time chasing missing / misplaced { }, forgetting semicolons case sensitivity and ()'s. Now semicolons, case and () problems are just a "Oh Bugger" moment, but as for missing / misplaced { } 's. They can be time waster. For all you pro c# developers, Do you have any tips on keeping these damn { } under control?
The keyboard shortcut "control }" will jump to the matching bracket if you can't immediately identify it. It will work when the cursor is either before or after an opening bracket or a closing bracket. I'd use that command every 5 minutes. very helpful when the scope of a set of brackets extends beyond the visible portion of the page.
who knows what evil lurks in the hearts of men?
-
Now, I am not interested in a VB versus C# debate but. In my job I only spend about 20% of my time coding. Being from a C# background anything new I would normally do in C# (and yes very occasionally VB), but I also have to maintain old VB code (and heaven forbid, very occasionally VB6). Normally I spent a month or two in each language (depending on the task at hand) and are happy in any camp. Changing back and forth between languages is relatively straight forward, but lately I noticed it takes me longer to get back into swing of C#. And the reason.. Well, I think its because I've got myself into bad c# typing habits from using vb. I seem to be wasting so time chasing missing / misplaced { }, forgetting semicolons case sensitivity and ()'s. Now semicolons, case and () problems are just a "Oh Bugger" moment, but as for missing / misplaced { } 's. They can be time waster. For all you pro c# developers, Do you have any tips on keeping these damn { } under control?
-
Now, I am not interested in a VB versus C# debate but. In my job I only spend about 20% of my time coding. Being from a C# background anything new I would normally do in C# (and yes very occasionally VB), but I also have to maintain old VB code (and heaven forbid, very occasionally VB6). Normally I spent a month or two in each language (depending on the task at hand) and are happy in any camp. Changing back and forth between languages is relatively straight forward, but lately I noticed it takes me longer to get back into swing of C#. And the reason.. Well, I think its because I've got myself into bad c# typing habits from using vb. I seem to be wasting so time chasing missing / misplaced { }, forgetting semicolons case sensitivity and ()'s. Now semicolons, case and () problems are just a "Oh Bugger" moment, but as for missing / misplaced { } 's. They can be time waster. For all you pro c# developers, Do you have any tips on keeping these damn { } under control?
I code in VB and C# at work - my preference is for C~ due to what I describe as its 'elegance'. Occasionally when I swap over I catch myself adding a semicolon to some VB code however Visual Studio catches it and I soon remember that I am coding on VB. I don't find it too big a deal - being bilingual(English and French), for me it's a similar experience swapping between two programming languages and two spoken languages. Sometimes when I see some horrendous VB code I am heard to exclaim "Put*in de b*rdel de m*rde!" when I meant to comment in English
“That which can be asserted without evidence, can be dismissed without evidence.”
― Christopher Hitchens
-
Now, I am not interested in a VB versus C# debate but. In my job I only spend about 20% of my time coding. Being from a C# background anything new I would normally do in C# (and yes very occasionally VB), but I also have to maintain old VB code (and heaven forbid, very occasionally VB6). Normally I spent a month or two in each language (depending on the task at hand) and are happy in any camp. Changing back and forth between languages is relatively straight forward, but lately I noticed it takes me longer to get back into swing of C#. And the reason.. Well, I think its because I've got myself into bad c# typing habits from using vb. I seem to be wasting so time chasing missing / misplaced { }, forgetting semicolons case sensitivity and ()'s. Now semicolons, case and () problems are just a "Oh Bugger" moment, but as for missing / misplaced { } 's. They can be time waster. For all you pro c# developers, Do you have any tips on keeping these damn { } under control?
As others have said, I close braces on opening them (well, I cheat and let ReSharper do that), and I keep the number of braced scopes in a method to a minimum, e.g. avoid nested braces like the plague. The highest level I normally get to is say for one loop or switch at a time.
No object is so beautiful that, under certain conditions, it will not look ugly. - Oscar Wilde
-
Now, I am not interested in a VB versus C# debate but. In my job I only spend about 20% of my time coding. Being from a C# background anything new I would normally do in C# (and yes very occasionally VB), but I also have to maintain old VB code (and heaven forbid, very occasionally VB6). Normally I spent a month or two in each language (depending on the task at hand) and are happy in any camp. Changing back and forth between languages is relatively straight forward, but lately I noticed it takes me longer to get back into swing of C#. And the reason.. Well, I think its because I've got myself into bad c# typing habits from using vb. I seem to be wasting so time chasing missing / misplaced { }, forgetting semicolons case sensitivity and ()'s. Now semicolons, case and () problems are just a "Oh Bugger" moment, but as for missing / misplaced { } 's. They can be time waster. For all you pro c# developers, Do you have any tips on keeping these damn { } under control?
I stick to languages derived from c. Currently mostly c, java and perl. I have no problems switch between these. Pitch to one of your managers to have the code you're maintaining rewritten in C#... Or rewrite it in C# and tell your boss what you've did and if they'd be interested in changing over to it. To my knowledge there should be no reason to write any code in vb... If we employ people, it is never a requirement to only know vb or only know C#... Its usually in the lines of, do you have vb or C# experience. As the task at hand can usually be performed in either. According to Wikipedia there are 89 different c derivative languages. C obviously had a winning recipe. Your subject should read 'Damn vb (why do they have to think they are special and different)'.
"Program testing can be used to show the presence of bugs, but never to show their absence." << please vote!! >>
-
Now, I am not interested in a VB versus C# debate but. In my job I only spend about 20% of my time coding. Being from a C# background anything new I would normally do in C# (and yes very occasionally VB), but I also have to maintain old VB code (and heaven forbid, very occasionally VB6). Normally I spent a month or two in each language (depending on the task at hand) and are happy in any camp. Changing back and forth between languages is relatively straight forward, but lately I noticed it takes me longer to get back into swing of C#. And the reason.. Well, I think its because I've got myself into bad c# typing habits from using vb. I seem to be wasting so time chasing missing / misplaced { }, forgetting semicolons case sensitivity and ()'s. Now semicolons, case and () problems are just a "Oh Bugger" moment, but as for missing / misplaced { } 's. They can be time waster. For all you pro c# developers, Do you have any tips on keeping these damn { } under control?
